Warranty Information
Eligible warranty for ECM Manufacture home equipment is handled by 1st-line Equipment or representative thereof. If you have purchased your ECM Manufacture equipment from another retailer (not 1st-line Equipment), you must contact them first in order to get your equipment serviced under warranty.
The warranty is limited to manufacturer's defects only.
Regarding espresso machines: Limescale buildup can lead to problems with your machine. The warranty will not cover any repairs if our technicians find limescale in your machine. Although descaling can be a good alternative to remove limescale causing minerals (calcium and magnesium), we strongly suggest that prevention is the best form of maintenance. The reason is that descalers can cause wear and tear on components inside an espresso machine. This includes gaskets, o-rings, and other metal components. However, where there is a clog somewhere, descaling will be a necessity on the specified part, area, or entire machine.
Regarding coffee grinders: As with all coffee grinders, it is very important to only change grind settings when the unit is powered on and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
The manufacturer's warranty on new equipment is good for a period of 1 year from date of receipt which covers parts. Labor warranties may vary depending on the company you purchase from. ECM Manufacture products may have an extended warranty limited to manufacturer's defect and will specifically state the extended period of time on your receipt.
In most cases, your ECM Manufacture equipment must be sent to a repair facility. If 1st-line Equipment will be servicing your equipment, you must either ship it or drop off at our facility in New Jersey.
If you are inside the warranty period and have purchased it from us, please contact us. Please be ready to provide the following information: invoice# of purchase, model of equipment, and a detailed description of the issue.
If you are outside the warranty period, whether you have purchased the equipment from us or not, please order a diagnosis. Please note that wait times can be up to 8 weeks. Our technical support staff can have a back log of repairs. As an alternative we have a listing of 3rd party repair companies across the USA that can assist you.
Manuals & Documentation
- Barista
- Barista A2, A3
- Casa
- Casa IV
- Casa V
- Casa Automatik
- Casa Speciale
- Classika II
- Classika II PID
- Compact HX-2
- Controvento
- Elektronika II Profi
- Elektronika II Profi Due
- Mechanika IV
- Mechanika IV Profi
- Mechanika IV Profi Due
- S-Automatik 64
- S-Manuale 64
- Synchronika
- Technika IV
- Technika IV Profi
- Technika IV Profi Due
- V-Titan 64
Parts & Diagrams
ECM Manufacture Parts
- Please research the diagrams on our web site to determine the part needed, then search for the part number on our web site using our search box.
- If uncertain, please go to the model machine or part web page, and use the Q&A tab found on that web page to ask your question.
- Lastly, and only if the first two were exhausted, please use our contact page.
- Our call center does not have the training to handle parts inquiries for over 60,000 different parts items. If you prefer to have hand-holding on a machine purchased elsewhere or out of warranty, we can offer our services for a charge.
- Please note also that all parts purchases are non-returnable or refundable and also do not include technical support, instructions, nor warranties as the purchase price of any part does not cover the cost of technical support. Technical support is available for repairing machines in our shop.
Diagrams for ECM Manufacture Equipment:
Technical Support Pages
-copyright of 1st-line & ECM
