What’s Included
- Torre Peppina EVO Premium Espresso Machine
- Portafilters: 58mm single spout, dual spout, bottomless
- Filter baskets: 1-cup (7-8 g), 1-cup (9-12 g), 2-cup (16-18 g), 3-cup (18-20 g), blind
- Tampers: cheap plastic one and a solid wood handle one w/ metal base
- Steam tips: 3-hole, 4-hole (2-hole installed)
- Hose: For connecting to a water line
- Coffee scoop: For use with ground coffee
- Cloth wipe: For general body cleaning
- Cleaning brush: For grouphead cleaning
- Oscar pack: For water softening
- Puly Caff: For backflushing (10 packets)
- Instruction manual: In English & Italian
Overview
Torre Peppina EVO Premium V2 CAFE LUXURY Dual Boiler Espresso Machine w/ Flow Control
Make your Peppina truly your own with the Torre Peppina EVO Premium V2 CAFE LUXURY. In addition to choosing your machine’s finish, you can customize its appearance with one of six distinctive Luxury Side Panel designs—Chimera, Forge, Haute, Hexa, Hyper, or Shiver. Each design features its own unique geometric shape, pattern, and visual character, transforming the Peppina from a high-performance espresso machine into a personalized centerpiece for your coffee setup. With multiple combinations of colors, finishes, and panel designs available, you can create a Peppina that’s as individual as your style.
Body components in color (your selection):
- All body panels: front, left, right, back.
- Drip tray.
Exterior components in stainless steel:
- Top cup railing.
- Grouphead assembly.
- Steam & Hot water valves & wands.
- Drip tray grill.
- Power switch.
- Feet.
- Portafilter heads.
Videos






























Features
Dual Boiler System
- VERSION 2 UPGRADE: Larger 1.5 liter steam boiler (up from 1.2), thickened flanges for both coffee and steam boiler
- EVO UPGRADE > Steam Capacity: 25% increase in size compared to the standard Peppina model.
- EVO UPGRADE > Steam Power: 25% increase in pressure with the capability to reach up to 1.6 bar.
- EVO UPGRADE > Water/Steam Pro-Balance: You have the ability to control the amount of water in the boiler. Less water allows for more steam capacity.
- Stainless steel, insulated: The boilers are made of stainless steel which is less susceptible to limescale. Typically stainless steel boilers do not retain their heat as well as copper or brass boilers. This V2 Peppina has thicker stainless over version 1. This espresso machine i also partially wrapped with insulation for energy savings and temperature stability.
- Pull a shot & steam milk at the same time: Steam is always readily available. Therefore there is no wait time going from coffee to steam mode. It works well if entertaining a small group of people.
- Auto refill: A sensor in the boiler detects when the water in the boiler is low. This prevents burning out the heating element.
E61 Grouphead
- EVO UPGRADE > Flow Control: Preinstalled on the grouphead giving you the ability to customize your espresso shots on the fly!
- Constantly Heated: Hot water circulates from the coffee boiler through the grouphead and back to keep the grouphead and your portafilter nice and hot. This keeps the grouphead at a constant, stable temperature compared to other groupheads that have a built-in heating element.
- ERGOLIFT Lever: A new look on the activation lever of the grouphead.
- Pressure Gauge: Measures the actual pressure readout at the grouphead level.
Multi-Function Aircraft Grade Touchscreen Display
- Alarms display: Any fault issues with the machine will notify you by displaying a red triangle and will stop the machine from operating until the issue is resolved. Any maintenance alarms you set will notify you by displaying a yellow triangle. The machine will still operate until you manually clear it.
- Maintenance planning: Set reminders for changing your water softener, cleaning, or maintenance cycle. Set by # shots pulled.
- Settings: Language, date, temperature format (°C > °F), water connection (reservoir > water line)
- Temperature/Pressure control: Adjust the coffee boiler temperature from 85 °C to 100 °C (185 °F to 212 °F) or the steam boiler pressure from 0.5 to 1.6 bar.
- Eco standby by mode: Set a time period of inactivity (in minutes) for when the machine will enter a standby mode to conserve energy.
- Counters: The machine keeps track of coffee shots pulled (resettable), the total lifetime coffee shots pulled, the amount of water passed through the machine, & # of maintenance cycles.
- Auto power on/off: You can set the machine to power on and off at certain times, like when you wake up or when you come home.
- Programmable preinfusion: Program both the initial pump start/stop time up to 25 seconds in 0.01 increments.
Steam / Hot Water Wand
- Joystick knobs: Quick action controls. Each knob locks in any direction for hands-free operation.
- Multi-directional wands: Allows for more movement and flexibility depending on the size of your pitcher or cup.
- 2-hole steam tip: Allows for a slow gradual build-up of microfoam. More steam tip holes mean faster frothing but also steam runs out quicker. 3-hole & 4-hole steam tips included. Choose which best fits your barista style.
Switchable Tank / Direct Water Line Connection
- Open top reservoir: Easy to clean. Easy to fill. However, to avoid spillage, we recommend removing the water tank when filling with water. Remember to use the OSCAR pack to soften your water (replacements available).
- Easy transition: After hooking up the water line hose (included) to your machine, all you need to do is change a setting in the touchscreen display. The water line hook-up is behind the drip tray, more convenient than underneath the machine. For direct connect water softening we recommend BWT.
Rotary Vane Pump
- Quiet operation: Rotary pumps are necessary for direct water line capable machines since vibration pumps cannot handle the incoming water pressure. The main benefit that you will experience is that they are a lot quieter.
- Adjustable: The adjustment screw is located underneath the water tank. A more convenient spot compared to other machines where you have to remove the body panel to access.
Specifications
| Brand | Torre |
|---|
Notes
- The Peppina uses lead free components.
- Stainless steel boiler with lead free brass fittings.
- Lead free brass group.
- Lead free brass taps.
- Lead free brass filter holders.
- Effective Dec 6, 2024, Torre espresso machines can come with SSR Relays either from Panasonic or Carlo Gavazzi.
- The Torre Peppina EVO Premium Dual Boiler can be connected to a smart timer switch. However, you must turn off the timer on the menu screen.
- The steam boiler will always have some water to cover the heating elements just in case someone quickly tuns on the steam boiler. If you do not steam milk, you can set, through the front aircraft grade touch screen, the level of the water in the steam boiler to 20% which reduces the water in the steam boiler.
General Espresso Machine Notes/Warnings:
- Upon first use (tank/reservoir models): On the initial start-up (or after a long period of non-use), it is important to make sure the pump is removing water from the tank. When the machine is powered on, you will hear the pump running. After 5 seconds, squeeze the in-line hose in the tank (usually the longest hose, has a particle filter attached). if you hear a different sound, this means the pump is working correctly. If not, immediately power down the machine and contact us. For more information, visit this page General Manual Pump Priming.
- Electrical: To avoid electrical damage to this espresso machine which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. Without the recommended surge suppressor, the espresso machine can be damaged at the power switch, the electronics, the heating element, the pressurstat, or the wiring inside. For more information, visit this page Power Protection.
- Water: To increase the useful life and not damage your espresso machine, please use softened water. Softened water is water without calcium and magnesium, but still has other minerals for espresso extraction. Do not use distilled, purified, or reverse osmosis water as these types of water create oxidation with the metals and cause the same damaging effects as limescale. For more information, visit this page Water Choice.
- Descaling: We do not recommend descaling unless there is an issue with the espresso machine. Too much descaling can eat away at the metals and gaskets inside an espresso machine. As a preventative measure, we recommend using softened water as explained in the bullet point above.
- Backflushing: This procedure of cleaning the grouphead will need to be performed from time to time. For more information, visit this page Espresso Machine Backflush – Why 50?
Blogs
Support
Parts
- Please use the parts diagrams provided below to determine the part(s) you need. Then use our search box above to find the part(s) on our website.
Note: These parts diagrams are provided by the manufacturers. We list them on our site for informational purposes only. We do not stock every single part listed nor can we guarantee that every part is available to order. - If uncertain, please go to the equipment model or part product page. Then use the Q&A tab found on that web page to ask your question.
- Lastly, and only if the first 2 options were exhausted, please use our parts inquiry page.
- Our call center does not have the training to handle parts inquiries for over 60,000 different parts items. Asking any questions regarding parts will more than likely result in you being referred to the above steps.
- Please note also that all parts purchases are non-returnable or refundable and do not include technical support, instructions, or warranties as the purchase price of any part does not cover the cost of technical support. Technical support is available for repairing equipment in our shop.
- Sorry, we will only special order a part for a model we carry AND was purchased through our supply chain.
- Since we are unaware of the mechanical, electrical, and/or plumbing expertise of a parts buyer or the tools owned by a parts buyer, we are never able to advise if a self-repair can be performed.
| # | SKU |
| 1 | T02APP002 |
| 2 | TARG0001 |
| 3 | RACCS005 |
| 4 | T02FRO004 |
| 5 | T02FIA002 |
| 6 | VITE4001 |
| 7 | DADO1801 |
| 8 | T02SUP003 |
| 9 | T02SCA003 |
| 10 | T02RAI001A |
| 11 | T02POS001 |
| 12 | VITE4003 |
| 13 | T02POR001 |
| 14 | T02SUP004 |
| 15 | T02FIA001 |
| 16 | RONDP401 |
| 17 | T02BAS001C |
| 18 | PIED0003 (H40) |
| 19 | PIED0002 (H30) |
| 20 | APIED001 (H20) |
| 21 | ABAS0002 |
| 22 | T02BAC001 |
| # | SKU |
| 1 | MOTO0001 (220/230-240V) |
| 1 | MOTO0002 (110-120V) |
| 2 | POMP0002 |
| 3 | RACCR001 |
| 4 | RACCL009 |
| 5 | TANI0002 |
| 6 | DADO1401 |
| 7 | GUAR0010 |
| 8 | RACCS001 |
| 9 | VALV0005 |
| 10 | GUAR0011 |
| 11 | RACCS004 |
| 12 | RONDP402 |
| 13 | RONDP401 |
| 14 | VITE4008 |
| 15 | VITE4002 |
| 16 | TUBT0004 |
| 17 | RACCL004 |
| 18 | RACCT004 |
| 19 | TUBS0011 |
| 20 | TUBT0005 |
| 21 | VITE6001 |
| 22 | RONDD601 |
| 23 | VITE5001 |
| 24 | RONDD501 |
| 25 | RONDP601 |
| 26 | VIBR0001 |
| 27 | T02SUP002 |
| 28 | DADO6001 |
| # | SKU |
| 1 | T02SUP008 |
| 2 | VITE8001 |
| 3 | RONDP802 |
| 4 | CALD0005 |
| 5 | RACCL001 |
| 6 | SOND0004 |
| 7 | VALV0004 |
| 8 | GUAR0004 |
| 9 | RACCT002 |
| 10 | VALV0003 |
| 11 | RACCT001 |
| 12 | TERM0003 |
| 13 | CALD0002 |
| 14 | T02SUP006 |
| 15 | VITE4003 |
| 16 | GUAR0005 |
| 17 | RESI0001 (230-240V) |
| 17 | RESI0005 (110-120V) |
| 18 | RACCL007 |
| 19 | RACCL008 |
| 20 | RACCD003 |
| 21 | RESI0003 (230-240V) |
| 21 | RESI0007 (110-120V) |
| 22 | TERM0004 |
| 23 | DADO5001 |
| 24 | SOND0005 |
| 25 | ISOL0004 |
| 26 | RACC0002 |
| 27 | ISOL0002 |
| 28 | RONDD501 |
| 29 | GUAR0002 |
| # | SKU |
| 1 | T02TU005 |
| 2 | RACCT005 |
| 3 | RACCL005 |
| 4 | T02TU004 |
| 5 | RACCL002 |
| 6 | EV223001 |
| 7 | RONDP401 |
| 8 | VITE4001 |
| 9 | VALV0002 |
| 10 | TUBS0011 |
| 11 | VALV0001 |
| 12 | RACCL009 |
| 13 | T02SUP007 |
| 14 | DADO4001 |
| 15 | VITE4004 |
| 16 | RUBIR001 |
| 17 | RACCT005 |
| 18 | RACC0003 |
| 19 | RACCD006 |
| 20 | TUBS0011 |
| 21* | T02FRO004 |
| # | SKU |
| 1 | T02SUP001 |
| 2 | RONDD501 |
| 3 | DADO5001 |
| 4 | T02TU003 |
| 5 | SOND0003 |
| 6 | T01TU002 |
| 7 | PRES0003 |
| 8 | VITE4004 |
| 9 | VITE4003 |
| 10 | RELA001 |
| 11 | DOS23001 (230V) |
| 11 | DOS11501 (110V) |
| 12 | T02SUP005 |
| 13 | PRES0004 |
| 14 | RACCD005 |
| 15 | TUBT000 |
| 16 | INTE0005 |
| 17 | RACCD004 |
| 18 | T02TU001 |
| 19 | T02TU002 |
| 20 | PASS0001 |
| 21 | T02TU006 |
| 22 | CAVO000 (Shuko 1.5 MT) |
| 22 | CAVO0002 (US 125V 15A) |
| 22 | CAVO0003 (US 250V 20A) |
| 22 | CAVO0004 (Australia) |
| 22 | CAVO0005 (UK) |
| 22 | CAVO0006 (Switzerland) |
| 23 | INTE0002 |
| 24 | LAMP0001 |
| 25 | DISP0001 |
| # | SKU |
| 1 | RGRU0001 |
| 2 | RGRU0002 |
| 3 | RGRU0003 |
| 4 | RGRU0004 |
| 5 | RGRU0005 |
| 6 | RGRU0006 |
| 7 | GUAR0001 |
| 8 | RGRU0007 |
| 9 | DADO8001 |
| 10 | RGRU0008 |
| 11 | RGRU0009 |
| 12 | RGRU0010 |
| 13 | MANP0001 |
| 14 | T01LEV001 |
| 15 | VITE8004 |
| 16 | T01R0N001 |
| 17 | DADO6002 |
| 18 | T01R0N002 |
| 19 | RGRU0011 |
| 20 | RGRU0012 |
| 21 | RGRU0013 |
| 22 | RGRU0014 |
| 23 | RGRU0015 |
| 24 | RGRU0016 |
| 25 | RGRU0017 |
| 26 | RGRU0018 |
| 27 | RGRU0019 |
| 28 | RGRU0020 |
| 29 | RGRU0021 |
| 30 | RGRU0022 |
| 31 | RGRU0023 |
| 32 | RGRU0024 |
| 33 | RGRU0025 |
| 34 | RGRU0026 |
| 35 | RGRU0027 |
| 36 | RGRU0028 |
| 37 | RGRU0029 |
| 38 | RGRU0030 |
| 39 | RGRU0031 |
| 40 | RGRU0032 |
| 41 | RGRU0033 |
| # | SKU |
| 1 | DADO1401 |
| 2 | RONDG1401 |
| 3 | RRUB0019 |
| 4 | RRUB0020 |
| 5 | MOLLA-V |
| 6 | RRUB0022 |
| 7 | RRUB0023 |
| 8 | RRUB0024 |
| 9 | RRUB0025 |
| 10 | RRUB0026 |
| 11 | RRUB0027 |
| 12 | RRUB0028 |
| 13 | RRUB0029 |
| 14 | RRUB0030 |
| 15 | MANP0007 |
| 16 | RRUB0031 |
| 17 | RRUB0013 |
| 18 | RRUB0012 |
| 19 | RRUB0032 |
| 20 | RRUB0033 |
| 21 | RRUB0034 |
| 22 | RRUB0035 |
| 23 | 23119005 |
| 24 | RRUB0037 |
| 25 | RRUB0038 |
| 26 | RRUB0039 |
| 27 | LANCA001 |
| 28 | LANCV001 |
| 29 | RUBIL0001 |
| # | SKU |
| 1 | FILT0003 |
| 2 | ANEL0001 |
| 3 | PTFL0001 |
| 4 | MANP0005 |
| 5 | BECC0002 |
| 6 | FILT0002 |
| 7 | BECC0001 |
| 8 | FLEX0003 |
| 9 | VALV0002 |
| 10 | TAMP0002 |
| 11 | TAMP0001 |
| 12 | MISU0001 |
| 13 | SPAZ0001 |
| 14 | APTF2001 |
| 15 | APTF1001 |
| 16 | TAPP0001 |
Reviews
Q & A
Submit Questions for FAQ
Please review the FAQ to confirm the question or topic was not previously covered.
Any followup questions for FAQ should be requested as a separate FAQ submission.
There are no questions yet. Be the first to ask a question about this product.
