Picture of Bezzera Crema PM Espresso Machine - HX, Semi-Automatic, 110V, White Body Panel
Picture of Bezzera Crema PM Accessories
Picture of Bezzera Crema PM Side
Picture of Bezzera Crema PM Tray
Picture of Bezzera Crema PM Back
Picture of Bezzera Crema PM Front
Picture of Bezzera Crema PM

DISCONTINUED Bezzera Crema PM Semi-Automatic HX Espresso Machine

This product has been discontinued at 1st-line Equipment.
Please visit one of the links below for more comparable products.

Check out the PID version.

.

SKU: BZCREMSPM1BI2N Categories: , , Tag:

Bezzera Crema PM Espresso Machine – heat exchanger with semi-automatic push-button for coffee

Overview

The Bezzera Crema PM features the classic Bezzera stainless steel/white body with luxurious wooden knobs, which will give your home espresso bar some flair and beauty. If you plan on entertaining a small group with espressos, cappuccinos, coffee, and tea, then this might be the one for you! The Bezzera Crema PM incorporates a Mater pressurstat to control the boiler temperature as well as a thermostat on the heated Bezzera grouphead to make fantastic beverages.

The awesome looking coffee button on the top front illuminates while making espresso. The power switch, on the lower right side above the drip tray, has rubber protection. The upper light to the left of the switch is the power on light and turns green when the unit is powered on. The light below the power light is the low water light. The low water light will illuminate amber/yellow when there is enough water in the reservoir. It will turn off when there is not enough water in the reservoir.

The large dialed, dual gauge serves two purposes. The upper portion of the gauge indicates the steam pressure built up in the boiler. The lower portion is the brew pressure which indicates how much resistance is created by the grind fineness, the amount of ground espresso coffee in the basket, and the tamping pressure.

The wood portafilter handle is ergonomically designed with a slant for level tamping and smooth feel when inserting it into the grouphead.

Features
Picture of Heat Exchange System

Heat exchange system:

  • Copper – The boiler is copper which retains heat better than stainless steel. Typically, copper boilers are more susceptible to limescale when you compare to stainless steel boilers. Therefore, we highly recommend using a water softener.
  • Pull a shot & steam milk quickly – Steam is always readily available. Hence, there is no wait time going from coffee to steam mode or vice-versa.
  • Boiler low water cut off – The heating element will not turn on unless the minimum water level sensor detects enough water to submerge the heating element.
  • High limit safety thermostat – If the boiler pressure/temperature goes too high, the safety thermostat will cut off power to the heating element.
  • Boiler safety valve – If the boiler pressure/temperature goes too high, the boiler safety valve will open to allow excessive steam pressure to be released from the boiler.
Picture of Water Tank

Tank/Reservoir:

  • Particle filter – Protects the machine from any unseen particles from entering the Bezzera Crema espresso machine’s pump. You can keep this filter in place or remove it when installing the inline water softener to prevent limescale from damaging the Bezzzera Crema.
  • Automatic boiler water supply – the brain unit refills the internal steam boiler when the boiler refill sensor.
  • Water reservoir auto-shutoff – The low water cutoff under the reservoir prevents burning out the heating element. The water tank sits on a spring-activated plate. Once the water is low, the plate depresses the tank micro-switch which turns off the heating element. If installing the water softener, the switch may need to be lowered to shut off the machine sooner. In other words, place in the water softener, after recharging, and press the coffee switch to see when the tanks huts off the machine. The water level should be above the water softener laying down on its side. If standing up, then it should be ok.
Picture of Pump

Vibratory pump:

  • Efficient – 41 watts, rated up to 15 bar with air valve bypass. You only need 9 bar to extract perfect espresso, and wattage has no correlation to longevity.
  • Cost-effective – Pumps will degrade in performance over time. Replacing a vibration pump will cost less than a rotary vane pump.
Picture of Push Button

Push-button settings:

  • Push-button controls the group – This activates a vibration pump and opens the grouphead solenoid valve to pump water through your ground espresso coffee. When you have the amount you want, press the push-button again for the pump to stop.
Picture of Steam Wand

Steam and hot water wands:

  • Multi-directional – The multi-directional wands for hot water and steam allows for more movement and flexibility.
  • Valves – Joystick activated typically with full open in an upwards locked position.
  • Steam – Although the steam wand has a rubber grip, the steam wand has insulation inside to keep it cool to the touch when quickly moving.
Picture of Construction

Construction:

  • Frame – Black enamel painted steel
  • Wrap-around uni-body – White enamel paint
  • Drip tray and Cover -polished stainless steel
  • Top three covers – polished stainless steel
  • Feet – stainless steel with plastic/rubber bottoms to curtail slipping
Picture of Accessories

Accessories included:

  • Dual spout filter handle – 58mm in diameter with a wooden handle.
  • 1-cup filter basket –  Holds 7g of coffee grounds.
  • 2-cup filter basket – Holds 14g of coffee grounds.
  • Blind filter basket – Meant for backflushing at 58mm in diameter.
  • Plastic scoop – Great for using preground coffee.
  • Plastic tamper – Common for most espresso machines to keep the overall selling price of machine low. We recommend upgrading to a better 58mm tamper. Check out two of them below!
  • Instructional manual in English.
  • Cleaning brush – For cleaning the grouphead gasket.
  • OPV catch pipe for the drip tray.

Specifications
Brand

Bezzera
Height (inches)

15, approximate
Width (inches)

10, approximate
Depth (inches)

18, approximate
Weight (pounds)

41, approximate
Wattage (watts)

1200
Voltage (volts)

110
Boiler Type

Heat Exchanger
Boiler capacity (liters)

1.5
Tank capacity (liters)

3
Portafilter size (mm)

58
Country of manufacture

Milan, Italy
E61 Grouphead

No
Operation

Semi-Automatic
PID Control

No
Water Connection

Tank / Reservoir

Notes

General Espresso Machine Notes/Warnings:

  • Upon first use (tank/reservoir models): On the initial start-up (or after a long period of non-use), it is important to make sure the pump is removing water from the tank. When the machine is powered on, you will hear the pump running. After 5 seconds, squeeze the in-line hose in the tank (usually the longest hose, has a particle filter attached). if you hear a different sound, this means the pump is working correctly. If not, immediately power down the machine and contact us. For more information, visit this page General Manual Pump Priming.
  • Electrical: To avoid electrical damage to this espresso machine which is not considered a manufacturer’s defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. Without the recommended surge suppressor, the espresso machine can be damaged at the power switch, the electronics, the heating element, the pressurstat, or the wiring inside. For more information, visit this page Power Protection.
  • Water: To increase the useful life and not damage your espresso machine, please use softened water. Softened water is water without calcium and magnesium, but still has other minerals for espresso extraction. Do not use distilled, purified, or reverse osmosis water as these types of water create oxidation with the metals and cause the same damaging effects as limescale. For more information, visit this page Water Choice.
  • Descaling: We do not recommend descaling unless there is an issue with the espresso machine. Too much descaling can eat away at the metals and gaskets inside an espresso machine. As a preventative measure, we recommend using softened water as explained in the bullet point above.
  • Backflushing: This procedure of cleaning the grouphead will need to be performed from time to time. For more information, visit this page Espresso Machine Backflush – Why 50?
Please visit one of the links below for more Bezzera products & information.
Equipment & Accessories
 
Parts & Diagrams
 
Technical Support
 

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED Bezzera Crema PM Semi-Automatic HX Espresso Machine”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      Do you sell the pump to solenoid valve hose for this machine with the compression fittings attached. My silicone hose has come loose from the compression fitting on one end, and I am not sure how to reattach it.
    1. 0 votes
      Q Do you sell the pump to solenoid valve hose for this machine with the compression fittings attach...... Read more answer now
      Asked by Bill Grun on October 6, 2022 6:52 pm
      Answered by the admin Sorry, you would need to check the diagrams on our web site and then search by part number for availability and pricing.
      2. Some time ago Java Jim did a YouTube video on the Bezzera Crema/BZ13, I beleive. In it he mentioned a leg/foot for the Crema that is about 1/2-inch shorter than the factory issued one (Bezzera 7474218 Foot / Leg M10 D40X46. I'm not sure what model machine this fits on, but it looks like the one that is on my Crema). This would allow the machine to fit under the kitchen wall hung cabinets. I would like to purchase 4 of these legs, if they are available. Please provide the link on your website and the dimensions of the shortened legs.
    2. 0 votes
      Q Some time ago Java Jim did a YouTube video on the Bezzera Crema/BZ13, I beleive. In it he mention...... Read more answer now
      Asked by Luigi on March 24, 2022 11:12 am
      Answered by the admin

      Sorry, we are unsure as there are so many videos, and this foot may no longer be available.
      3. I was looking at potentially buying a crema when they arrive. Does the crema have automatic preinfusion? Will it come in other colors or just white and ss? Is there any kind of a package deal that could be assembled with a grinder, was looking at the eureka perfecto?
    3. 0 votes
      Q I was looking at potentially buying a crema when they arrive. Does the crema have automatic prein...... Read more answer now
      Asked by Brian on March 8, 2021 5:13 pm
      Answered by the admin

      Preinfusion is built into the ramp up time of the vibration pump - this is common on vibe pump machines.

      As far as we know, we will only have them in white. As for packages, they are listed on our web site when available.

    Christian M. from United States (US) purchased

    Bellezza Inizio R Leva HX Espresso Machine

    11 minutes ago