-44%
rrPL044MM-120SOLD
rrPL044MM-120-02
rrPL044MM-120SOLD
rrPL044MM-120-02

*SOLD!* – SIDEWALK SALE – Lelit PL044MM Fred Stepless Doserless Espresso Coffee Grinder (USED)

$179.00

In-Store Purchase ONLY. NO Shipping. NO Payment by phone. First come first serve. For more info: SIDEWALK SALES

THIS GRINDER HAS BEEN SOLD!

This grinder is a discontinued model. It has been lightly used and has scratches on the front and on the fork.

Warranty limited to manufacturer’s defect: 30 day parts and labor.

Please read our response to COVID-19 for complete details on in-store pickup.

SKU: rrPL044MM-120 Categories: , , , , Tags: , , ,

Lelit PL044MM Fred Doserless Espresso Coffee Grinders with Stepless Grinding Adjustment

The beautiful Lelit PL044MM Fred is replacing the previous PL53 Fred which have sold successfully over the last 10 years. Same size burrs. Same grinding adjustment and operation. Only this time, there is an actual portafilter fork and nicer design pleasing to the eye!

The Lelit PL044MM pairs nicely with the Lelit PL62 Mara, Lelit PL62T Mara, Lelit Mara X, and Lelit Elizabeth espresso machines!

Lelit PL044MM Fred Stepless Doserless Espresso Coffee Grinder

Grinding Adjustment

  • Stepless – Infinite number of grind settings which allows you really fine tune your grind. Adjustment dial is on the right side of the grinder. Turn clockwise for a finer grind and counterclockwise for a coarser grind.
Lelit PL044MM Fred Stepless Doserless Espresso Coffee Grinder

Grinding Burrs

  • Conical Grinding Burrs – 38 mm in size. Spins at a low rpm which generates less heat. Heat buildup can negatively affect your coffee grinds by heating the coffee grinders before brewing.
Lelit PL044MM Fred Stepless Doserless Espresso Coffee Grinder

Grinding Operation

  • Semi automatic – The power button is on the left side. To start grinding, push your portafilter against the grinding button above the fork. Press and hold for continuous grinding, and release to stop.
Lelit PL044MM Fred Stepless Doserless Espresso Coffee Grinder

Bean Hopper

  • Low profile – The total height of the grinder without the hopper is a little under 11.5″. The bean hopper adds another 3″ bringing the total height to approximately 14.5″.
  • The bean hopper now has numbers written on the lower part which you can use a “guide” to see your current setting. Please note there is no indication on the grinder itself to line up with the numbers.
Brand

Lelit
Height (inches)

13.5, approximate
Width (inches)

5, approximate
Depth (inches)

9, approximate
Weight (pounds)

6
Wattage (watts)

150
Voltage (volts)

110 – 120
Burr size (mm), Type

38
Hopper capacity (grams)

250
Country of manufacture

Italy
  • There is another version of this grinder (PL044MMT) which has a built-in timer. Our version currently does not have this timer.
  • Every PL044MM espresso coffee grinder is tested with coffee.
  • A star key (not included) to remove the chute on the front.
  • The cord plugs into the rear of the unit.
  • Alternate code: PL44
  • Replaced PL053, PL53, PL53-110

  1. Changing grind settings: As with all coffee grinders, it is very important to only change grind settings when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  2. Finding coffee grinds in a new grinder: We have confirmed that the manufacturer tests EVERY grinder with coffee beans before it leaves their facility, but they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging when you unwrap it.
  3. Static issues: There are static issues with all grinders, even the highest quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, trying using a different blend of beans.
  4. Replacing burrs: NEVER use a flat head screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.
  5. Electrical cord: Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish / slice to damage the cord.

Espresso Grinder Warning

  • CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
  • ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.

Ask a question

Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

There are no questions yet. Be the first to ask a question about this product.