ECMG82045

DISCONTINUED ECM Mechanika V Slim Espresso Machine

This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

Check out the newer Mechanika Slim VI.

.

SKU: ECMG82045 Categories: , , Tag:

ECM Mechanika V Slim Espresso Machine

The Mechanika V Slim is ECM’s modern HX commercial espresso machine that consists of advancements in elegant looks and technological boosting compared to the previous Mechanika Profi IV. This model also slimmed down a bit (hence, its name is the Slim) since it is only 10 inches wide and changed the shape of the boiler, which can go to a maximum of 2.2 L. The Mechanika V Slim features stunning steel legs, inscribed ECM in steam and hot water valves, separate steam and brew pressure gauges, single spout and dual spout portafilters, removable drip tray, and E61 grouphead.

ECM Mechanika V Slim Espresso Machine

New Design

  • Slimmer – The Mechanika V Slim is now only 10 inches wide (2 inches less than the Mechanika Profi IV).
  • Updates in aesthetics – Other changes in looks include stunning steel legs and inscribed ECM in steam and hot water valves.
ECM Mechanika V Slim Espresso Machine

Heat Exchange System

  • Stainless steel, insulated – The boiler is made of stainless steel which is less susceptible to limescale. Typically stainless steel boilers do not retain their heat as well as copper or brass boilers. This machine compensates that by being wrapped with insulation.
  • Shape change – The heat exchange boiler can now go to a maximum of 2.2 L. The shape change allows for ECM to retain a lot of room on the machine’s interior.
  • Pull a shot & steam milk at the same time – Steam is always readily available. Therefore there is no wait time going from coffee to steam mode. Works well if entertaining a small group of people.
ECM Mechanika V Slim Espresso Machine

Modifiable Brew Pressure

  • OPV placement– The OPV on the Mechanika V Slim is located on the top to modify the brew pressure. The valve, which is placed below the reservoir lid, can also be modified simultaneously with the brew pressure gauge to simply create rapid revisions when brewing.
ECM Mechanika V Slim Espresso Machine

Tank/Reservoir System

  • Open top: Easy to fill. Easy to clean.
ECM Mechanika V Slim Espresso Machine

Separate Pressure Gauges

  • Steam pressure gauge – Located on the left. Measures from 0 to 3 bar. Optimal pressure is between 0.8 and 1.1.
  • Brew pressure gauge – Located on the right. Measures from 0 to 16 bar. Optimal pressure is between 8 and 10.
ECM Mechanika V Slim Espresso Machine

E-61 Grouphead

  • Constantly heated – Hot water circulates from the heat exchanger through the grouphead and back to keep the grouphead and your portafilter nice and hot. This keeps the grouphead at a constant, stable temperature compared to other groupheads that have a built-in heating element.
  • Pre-infusion – The lever next to the grouphead activates a microswitch which turns on the pump to pump water through the coffee grinds. When you pull the lever half way up, it will open the valve to allow water into the grouphead without activating the pump. Please note that true pre-infusion requires the direct water connection whereby the water pressure from the water line creates the true pre-infusion.
ECM Mechanika V Slim Espresso Machine

Vibratory Pump

  • Semi-Quiet Operation – A sturdy and dense asset to any espresso machine to produce the best espresso, although it is slightly louder than rotary pumps
ECM Mechanika V Slim Espresso Machine

Steam Wand

  • Multi-directional – Allows for more movement and flexibility.
  • “No burn” – Wand is insulated to allow you to touch anywhere on the arm. Please note that after very long periods of steaming or pouring hot water, the arm will be too hot to touch. We recommend to only touch the rubber grips on each wand.
ECM Mechanika V Slim Espresso Machine

Accessories Included with the ECM Mechanika Slim

  • Portafilters – Single spout portafilter and a dual spout portafilter. Both handles match the style of the grouphead lever and are ergonomically designed with an angle for easier operation to lock into the grouphead
  • Filter baskets – 1-cup filter basket which holds approximately 7 grams. 2-cup filter basket which holds approximately 14 grams. Blind filter basket which you can use for backflushing. All basket are 58 mm in diameter.
  • Tamper – Solid 58mm tamper. No need to upgrade.
  • Instruction manual – Written in both German and English. The instructions also work for the Technika.
Brand

ECM Manufacture
Height (inches)

15.5, approximate
Width (inches)

9.8, approximate
Depth (inches)

17.5, approximate
Weight (pounds)

50
Wattage (watts)

1400
Voltage (volts)

110 – 120
Boiler capacity (liters)

2.2
Portafilter size (mm)

58
Country of manufacture

Assembled in Milan, Italy, Designed in Germany
Approvals

CE

Espresso Machine Warning:

  • ELECTRICAL WARNING: To avoid electrical damage to this espresso machine which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. the lack of the recommended surge suppressor, the espresso machine can be damaged at the power switch, the electronics, the heating element, the pressurstat or the wiring inside.
  • WATER WARNING: To increase the useful life of and not damage your espresso machine, please use softened water. Softened water is water without calcium and without magnesium, but still has other minerals for espresso extraction. Do not use distilled water, purified water, nor reverse osmosis water as these types of water create oxidation with the metals and cause the same damaging effects as limescale.
  • DESCALING WARNING: We do not recommend descaling unless there is an issue with the espresso machine. The reason is that too much descaling can eat away at the metals and gaskets inside an espresso machine.

Backflushing - should be performed with detergent minimum every 50 espresso extractions. A short backflush 'can' be performed daily. The paddle on the grouphead should be all the way to the right side of the grouphead.

For optimal performance reducing limescale, use the BILT Osmotic Scale Reduction cloth by removing from the bag, rinsing it under cold water, and placing it in the water tank/reservoir of your espresso machine.

We do not advise descaling as we find machines last longer with limescale prevention. Descaling eats away at the metals and gaskets inside the machine. Thus, the internals weaken from both the scale build up as well as the descaler.

The grouphead gasket and dispersion screen should be replaced every 6-12 months.

Finding your part
  • Please use the parts diagrams provided below to determine the part(s) you need. Then use our search box above to find the part(s) on our website. If no results come up, more than likely we do not stock the part.
  • If uncertain, please go to the equipment model or part product page. Then use the Q&A tab found on that web page to ask your question.
  • Lastly, and only if the first 2 options were exhausted, please use our parts inquiry page.
  • Our call center does not have the training to handle parts inquiries for over 60,000 different parts items. Asking any questions regarding parts will more than likely result in you being referred to the above steps.
  • Please note also that all parts purchases are non-returnable or refundable and do not include technical support, instructions, or warranties as the purchase price of any part does not cover the cost of technical support. Technical support is available for repairing equipment in our shop.
  • Sorry, we will only special order a part for a model we carry AND was purchased through our supply chain.
  • Since we are unaware of the mechanical, electrical, and/or plumbing expertise of a parts buyer or the tools owned by a parts buyer, we are never able to advise if a self-repair can be performed.
ECM-Mechanika-V-Slim-parts-diagram-01
# SKU
1 B5220818.1
2 B7474212
3 B7474216.1
4 E81000
5 P1984
6 P1998
7 P2006
8 P2007
9 P3001.6
10 P3002
11 P7029
12 P9001
13 P9003
14 P9004
15 P9009
16 P9016
17 P9017
18 P9018
19 P9028
20 P9029
21 P9030
ECM-Mechanika-V-Slim-parts-diagram-02
# SKU
1 B5471509
2 B7432517
3 B7496076
4 C199900275 (230V, 50Hz)
4 US1005 (110V, 60Hz)
5 C199900280 (230V, 50Hz)
5 US1001 (120V, 60Hz)
5 US1025 (100V)
6 C199900969
7 C229900518
8 C229900520
9 C229900548
10 C229900579
11 C229900703
12 C249900770
13 C439900695
14 C499900769
15 P2006
16 P2009
17 P2019
18 P2064
19 P3006.K
20 P3019
21 P6016
22 P6020.3
23 P6020.K3
24 P6020.K4
25 P6020.NK
26 P6021
27 P6022
28 P6023
29 P6025
30 P6047
31 P6051
32 P7000
33 P8016
34 P9007
35 P9010
36 P9010.K1
37 P9400
38 P9401
39 P6020
40 P6017
ECM-Mechanika-V-Slim-parts-diagram-03
# SKU
1 B7400902
2 B7432516
3 C199900214
4 C199900294
5 C199901550.1
6 C219900561
7 C229900393
8 C229900518
9 C229900520
10 C229900525
11 C229900559
12 C229900740
13 C309900127.2
14 P2006
15 P2009
16 P2011
17 P2045
18 P7014.1 (230V)
18 US1000 (110V)
19 P7049
20 P7080
21 P9013
22 P9402
23 P9403
24 P9404
ECM-Mechanika-V-Slim-parts-diagram-04
# SKU
1 B5522056.1
2 B7371509
3 C329900682
4 P6000
5 P6000.1
6 P6000.2
7 P6000.3
8 P6000.4
9 P6000.5
10 P6000.6
11 P6002.1
12 P6002.4 (2-hole)
12 P6002.7 (3-hole)
12 P6002.6 (4-hole)
12 P6002.3 (5-hole)
13 P6005
14 P6005.5
15 P6005.6
16 P6006
17 P6010
18 P6011
19 P6012
20 P6015
21 P6002.2
22 P6002.2
23 P6001.1
24 P6001.2
ECM-Mechanika-V-Slim-parts-diagram-05
# SKU
1 B7479942
2 B7479947
3 C219900423
4 C219900424
5 C219900425
6 C219900426
7 C219900427
8 C219900430
9 C219900431
10 C219903081
11 C229900549
12 C229901128
13 C229901165
14 C309900127.2
15 C309900131
16 C309900164
17 C449900229
18 C449900767
19 C469900421
20 C469900422
21 C469900783
22 C469901132
23 C519900103
24 C619900554
25 P1000.1
26 P1000.2
27 P1000.3
28 P1000.4
29 P1000.5
30 P1002
31 P1004
32 P1009
33 P1910.1
34 P2010
35 P2011
36 P9405
37 P9406
38 R000002142
39 R000002144
40 R000002146
41 R000002148
ECM-Mechanika-V-Slim-parts-diagram-06
# SKU
1 89424
2 89425
3 B5221875CM
4 B7633617
5 B7633618
6 C199900087
7 C199900306
8 C199900957 (DE)
8 P2034 (US)
8 P2035 (UK)
8 P2036 (AU)
9 C619900098
10 C619900104
11 C619900105
12 C619900106
13 C639900764
14 M2004 (240V)
14 US1004 (115V)
15 P2001
16 P2002
17 P2006
18 P2009
19 P2070
20 P2591
21 P6029
22 P9019
23 R210

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED ECM Mechanika V Slim Espresso Machine”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      Looking to purchase ECM portafilters part # 89472 (dual spout, angled), and part # 89476 (bottomless, angled). Do you carry these ECM optional parts?
    1. 0 votes
      Q Looking to purchase ECM portafilters part # 89472 (dual spout, angled), and part # 89476 (bottoml...... Read more answer now
      Asked by Anthony on November 29, 2021 1:40 pm
      Answered by the admin

      Sorry, we do not stock these at this time.
      2. Hi, just wondering if you had an ETA on when the ECM Mechnika V Slim might be back in stock. Thanks!
    2. 0 votes
      Q Hi, just wondering if you had an ETA on when the ECM Mechnika V Slim might be back in stock. Thanks! answer now
      Asked by doug on August 16, 2021 2:03 pm
      Answered by the admin Sorry, we have placed our order, but there is no ETA provided by ECM. If you can not wait, we do have other makes or models, but those are selling out quickly.
      3. What grease do you recommend for regreasing the E-61 lever? I backflush with water daily and with the solution once a week. I am nearing the 6-month point at which point i think i will need to regrease.
    3. 0 votes
      Q What grease do you recommend for regreasing the E-61 lever? I backflush with water daily and with...... Read more answer now
      Asked by Payne Griffin on July 8, 2021 4:36 pm
      Answered by the admin

      PetrolGel.
      4. I think I've settled on getting an HX machine. And i'm leaning toward the mechanika slim. What are your thoughts on this ecm vs other HX models/brands?
    4. 0 votes
      Q I think I've settled on getting an HX machine. And i'm leaning toward the mechanika slim. What ar...... Read more answer now
      Asked by william on June 9, 2021 2:17 pm
      Answered by the admin The Slim has a huge boiler for lots of steaming. However, larger boilers are more prone to require greater cooling flushes due to overheating at the grouphead. Every machine has tradeoffs based on usage. Hence, if steaming large amounts of milk, then the SLIM is a perfect fit.
      5. After the machine is on for a while and even after successfully making coffee with it, you can walk up to it and see the boiler pressure gauge has dropped to around the 1 bar mark, from it’s normal 1.5 bar. Open the steam wand valve and the pressure further drops and does not attempt to recover. Cannot hear the boiler relay clicking on anymore and cannot hear the boiler heating back up. Orange light is still lit. Must turn the power switch off, wait five minutes and turn it back on and that seems to work to put the machine back in operation with the pressure gauge going back to 1.5 bar……until it happens again. 1. Replaced Vacuum relief valve. Did not fix the issue 2. Jumpered both thermostats on top of the boiler. Did not fix the issue 3. Pulled the wire off the water level probe, this caused the pump to turn on and the orange light to turn off. This probe is ok as is the boiler water level 4. Pulled water tank out from the machine, orange front panel light goes out which indicates the tank water level switch is working 5. The label on the top of the Brain box looks like it has gotten very hot and has turned color. Is this normal?
    5. 0 votes
      Q After the machine is on for a while and even after successfully making coffee with it, you can wa...... Read more answer now
      Asked by Don on May 10, 2021 5:14 pm
      Answered by the admin

      Sounds like a new brain unit is needed. However, no guarantees and parts are non-refundable and non-returnable purchases as there is no way for us to check if an electrical part was damaged upon install.
      6. Need to replace ECM Technika IV broken portafilter # 89425 with 2 spigots (2 cups) I appreciate your confirming that this is the correct portafilter for my machine & price. Thank you for your assistance.
    6. 0 votes
      Q Need to replace ECM Technika IV broken portafilter # 89425 with 2 spigots (2 cups) I appreciate y...... Read more answer now
      Asked by EnriqueE45414 on September 17, 2020 4:40 am
      Answered by the admin

      This seems to be the incorrect part. We show this portafilter.
      7. I am noticing a persistent hissing when I run my machine. The hissing is getting worse. The machine is still holding pressure and I am able to use it, however I think it now needs to heat more often.
    7. 0 votes
      Q I am noticing a persistent hissing when I run my machine. The hissing is getting worse. The machi...... Read more answer now
      Asked by Daniel on June 5, 2020 3:44 pm
      Answered by the admin

      This problem is usually the result of limescale build up on the bleeder valve (which we have found on this machine) to not allow it to close the valve upon warm up. It is probably this because of the hissing. Take off the top cover and inspect for steam leaking from the inside.

      OR

      The other problem is overheating of the boiler caused by limescale inside the pressurstat or its pipe. This has more of a locomotive sound with the boiler pressure gauge (not pump pressure) over 2 bar.

      Diagrams for the Mechanika Slim espresso machine should be reviewed to learn the inside of the machine. Please note the manufacturers do not cover limescale issues under warranty as it is a water defect.
      8. just curious on the timeline when these will be back in stock?
    8. 0 votes
      Q just curious on the timeline when these will be back in stock? answer now
      Asked by dustinmaust on July 11, 2019 7:20 pm
      Answered by the admin

      These are just leaving Germany, so we re estimating 4-6 weeks depending upon a lot of variables.
      9. I am not sure exactly how to get the screen down since there is nothing to really hold it in place. This is my first espresso machine with an E61 grouphead, so it is something I am becoming more familiar with.
    9. 0 votes
      Q I am not sure exactly how to get the screen down since there is nothing to really hold it in plac...... Read more answer now
      Asked by Lindley Jones on May 10, 2019 6:45 pm
      Answered by the admin

      Thank you for your inquiry. Please only remove the dispersion screen when replacing. Otherwise, backflush as indicated.

       
      10. A friend has a Bezzera BZ10 and has been very happy, esp with the quick 10-min warm up time. I'm wondering if the warm up time on the ECM Mechanika Slim (or similar E61 head) is significantly greater? I know I can put a machine on a timer for the morning, but it's nice to be able to serve a drink when friends pop over...Is the BZ10 a clear winner, or is the difference only minutes?
    10. 0 votes
      Q A friend has a Bezzera BZ10 and has been very happy, esp with the quick 10-min warm up time. I'm ...... Read more answer now
      Asked by Christopher Gibson on January 9, 2019 4:16 pm
      Answered by the admin

      The Mechanika Slim needs a good 20-30 minutes to warm up. Please note after a timer you need to plug in a surge suppressor 1080 joules or higher because we have seen timers cause damage to the electrical components inside espresso machines.

      The BZ10 with a Bezzera grouphead warms up in usually 10-15 minutes. A similar machine for warm up within 15-20 miutes with an E61 grouphead is the Lelit Mara.

    Yuval S. from United States (US) purchased

    Rancilio 37030518 Shower/Dispersion Screen Screw

    1 hour, 9 minutes ago