VBM ELETRESD1611 Heating Element – 1600W, 110V

$109.95

Parts Terms & Conditions of Sale
  • Parts are non-returnable and non-refundable unless damaged in transit.
  • Parts do not include any over the phone technical support or instructions other than what is provided on the website.
  • Parts do not come with any warranty.
  • For more information, please see Terms & Conditions.
SKU: ELETRESD1611 Categories: , , Tag:
Earn 109 EspressoPoints worth $3.27! (Learn about EspressoPoints)
Earn 109 EspressoPoints worth $3.27! (Learn about EspressoPoints)

Frequently Bought Together

VBM ELETRESD1611 Heating Element - 1600W, 110V + Vibiemme GUARRESPICTEF Heating Element Gasket
Price for both: $125.63

VBM ELETRESD1611 Heating Element

This heating element (ELETRESD1611) is for the VBM Domobar Junior HX espresso machine model.

For the Domobar Super HX models, please see SKU# ELETRESSM1811.

You will need a socket wrench in order to remove or install this heating element.

  • 1 7/16″ (tight fit)
  • 1 1/2″ (loose fit)
  • or 37mm (exact fit but hard to find)

Notes:

  1. Please note that the manufacturer has and will change the brand or wattage of a heating element without notice. For example, an original heating element with 1400 watts, the manufacturer will change to 1200 watts or vice versa without notice. This is considered and accepted as standard business practice by all manufacturers and will be accepted upon order.
  2. Please note that heating elements can ‘look’ used. We do receive them from the manufacturers with white powder or a green oxidation. This is how we receive them.
For more Vibiemme (VBM) parts & diagrams, please visit our VBM parts page. If you have any questions, please reference the Q&A tab on each product page.

Please read the Terms & Conditions before ordering this part or any other part on our website.

VBM ELETRESD1611 Heating Element – 1600W, 110V

Brand

VBM (Vibiemme)

Wattage (watts)

1600

Voltage (volts)

110 – 120

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “VBM ELETRESD1611 Heating Element – 1600W, 110V”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      Is there any trick or special tool you can recommend to remove the heating element from this VBM Domobar Jr. HX machine? I have the machine upside down and have taken the sides and back panels off but due to the arrangment of the support rod for the boiler there doesn't seem to be any easy way to fit a crescent wrench in there. The element base appears to be roughly 1.5" in diameter but I'm not sure about that - can you please confirm the exact dimensions? My next step is to try a plumber's basin wrench on it, but I'm concerned about damaging the brass base. I'm also not sure a large socket would work as it doesn't appear that there is full vertical clearance between the base of the heating element and the access panel on the bottom of the machine. Ideas? I'd really like to replace this myself as that would only set me back around $90 with the gasket. If I send it to a local repair shop they'll likely charge me triple that...
    1. 0 votes
      Q Is there any trick or special tool you can recommend to remove the heating element from this VBM ...... Read more answer now
      Asked by IanB80238 on November 2, 2019 2:00 pm
      Answered by the admin

      A 1 7/16th inch socket wrench is needed and needs to be squeezed in. Sometimes the boiler will need to be held if limescale has frozen the internal threading. A plumber's wrench with threading should NEVER be used.