The VBM ELETRESD1611 is a coiled copper 1600W heating element with a threaded brass base and dual red terminals, designed for 110V systems. © 2025 1st-line.com

VBM ELETRESD1611 1600W 110V Heating Element

$71.99

  • Standard ground shipping within the contiguous 48 states. Alaska & Hawaii shipping costs extra.
  • Total order must be over $99 after all discounts.
  • For more information, please see Shipping Included.
  • Parts are non-returnable and non-refundable unless damaged in transit.
  • Parts do not include any over the phone technical support or instructions other than what is provided on the website.
  • Parts do not come with any warranty.
  • For more information, please see Terms & Conditions.
Request a Quote for Custom Package Builds
SKU: ELETRESD1611 Categories: , , Tag:
Earn 71 EspressoPoints worth $2.13! (Learn about EspressoPoints)
Earn 71 EspressoPoints worth $2.13! (Learn about EspressoPoints)

Frequently Bought Together

The VBM ELETRESD1611 is a coiled copper 1600W heating element with a threaded brass base and dual red terminals, designed for 110V systems. © 2025 1st-line.com + The VBM GUARRESPICTEF Heating Element Gasket is a plain white rubber O-ring, smooth and circular, shown from above on a white background. © 2025 1st-line.com
Price for both: $87.67

VBM ELETRESD1611 1600W 110V Heating Element

This heating element (ELETRESD1611) is for the VBM Domobar Junior HX espresso machine model.

For the Domobar Super HX models, please see SKU# ELETRESSM1811.

You will need a socket wrench to remove or install this heating element.

  • 1 7/16″ (tight fit)
  • 1 1/2″ (loose fit)
  • or 37mm (exact fit but hard to find)

Block "note-heating-elements" not found

Brand

VBM (Vibiemme)
Wattage (watts)

1600
Voltage (volts)

110 – 120

Parts Terms & Conditions

Please read the Parts Terms & Conditions below before ordering this part or any other part on our website.

  • Parts are non-returnable and non-refundable unless damaged in transit. Exchanges for parts "damaged in transit" are applicable so long as:
    • You must report the damage(s) to 1st-line within the first five business days of delivery receipt.
    • Pictures of the original box and part(s) are provided.
  • Damages made by the customer or the customer's authorized/hired repair person from improper handling or installation are the customer's responsibility.
  • Neither manufacturer nor 1st-line Equipment provides any warranty or guarantee on parts.
  • The customer agrees to waive all rights, where applicable by law, for all claims such as:
    • Not as described.
    • Defective merchandise.
    • Not fit for the intended use.
    • No longer fit for the intended use.
    • Incorrect merchandise received.
  • Please note we store parts in bins and they can arrive with cosmetic imperfections (ie scratches, nicks, etc).
  • Although we try our best to recommend the proper parts, clients agree to pay for return shipping charges for parts, including cases where errors are made in recommendations and ONLY whereby exceptions are made allowable by 1st-line Equipment, LLC in writing and with a Return Authorization (RA) Number.
  1. Parts purchases do not include any technical support in any form and/or instructions in any form.
  2. DUE TO THE NATURE AND COMPLEXITY OF EQUIPMENT AND NOMENCLATURE USED TO DESCRIBE PARTS, THERE IS NO PERSON AVAILABLE AT 1ST-LINE CAPABLE AND KNOWLEDGEABLE ABOUT THE 50,000+ DIFFERENT PARTS FOR ALL ESPRESSO MACHINES AND GRINDERS. BASED ON THIS, 1ST-LINE PERSONNEL IS NOT ABLE TO OFFER ANY PARTS ASSISTANCE VIA PHONE.
  3. The purpose of the email request is to allow us time to research the part. This also creates a paper trail in case of any mistakes or necessary clarification. We find this process works well and increases customer satisfaction since fewer mistakes are being made.
  1. Although we make our best effort to describe parts, please don't assume a part will fit your machine. Some models have different versions with different parts. If you are unsure of which part to order, please use our contact page with your make and model of machine for assistance. Although we can't guarantee a part will fit because we do not have the machine in front of us, we will make our best effort to assist via email.
  2. Please note that manufacturers will source and supply parts different from the original equipment. Although we make our best effort to describe parts, changes can occur by the manufacturer without any notice to 1st-line or to you. For example, a manufacturer may initially supply 110-volt heating elements with 1200 watts but later change to 1300 or 1400 watts without notice. Another example is that an initial parts replacement may have a Parker branded solenoid valve, but subsequent shipments may have Lucifer or ODE solenoids without notice. 1st-line Equipment will NOT be held responsible for any changes in the part supply, nor advertising in these types of discrepancies.

Reviews

There are no reviews yet.

Be the first to review “VBM ELETRESD1611 1600W 110V Heating Element”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Ask a question

Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

    Is there any trick or special tool you can recommend to remove the heating element from this VBM Domobar Jr. HX machine? I have the machine upside down and have taken the sides and back panels off but due to the arrangment of the support rod for the boiler there doesn't seem to be any easy way to fit a crescent wrench in there. The element base appears to be roughly 1.5" in diameter but I'm not sure about that - can you please confirm the exact dimensions? My next step is to try a plumber's basin wrench on it, but I'm concerned about damaging the brass base. I'm also not sure a large socket would work as it doesn't appear that there is full vertical clearance between the base of the heating element and the access panel on the bottom of the machine. Ideas? I'd really like to replace this myself as that would only set me back around $90 with the gasket. If I send it to a local repair shop they'll likely charge me triple that...
  1. 0 votes
    Q Is there any trick or special tool you can recommend to remove the heating element from this VBM ...... Read more answer now
    Asked by IanB80238 on November 2, 2019 2:00 pm
    Answered by the admin

    A 1 7/16th inch socket wrench is needed and needs to be squeezed in. Sometimes the boiler will need to be held if limescale has frozen the internal threading. A plumber's wrench with threading should NEVER be used.

Please visit one of the links below for more VBM products & information.

Equipment & Accessories

View other products from VBM.

Browse Equipment & Accessories

Parts & Diagrams

Find the part you need for your VBM equipment.

Search Parts & Diagrams

Technical Support

Get help for diagnosing your VBM equipment.

Access Technical Support

Videos

A playlist of videos showing VBM equipment.

Watch Videos
;
The VBM ELETRESD1611 is a coiled copper 1600W heating element with a threaded brass base and dual red terminals, designed for 110V systems. © 2025 1st-line.com
VBM ELETRESD1611 1600W 110V Heating Element
$71.99
Secret Link