Torre Alfredo TSP HX Espresso Machine

The Torre Alfredo! This is not the pasta, but you may be able to use the hot water and then the steam boost to cook your favorite pasta. Unfortunately, we have not tried it out yet!

The Torre Alfredo TSP espresso machine boasts a whopping 1.5 liter boiler that is fine tuned for the four selections of temperature. It already has the walnut accoutrements, and the only thing you need is a nice tamper. Stainless steel framing on the underside is a BIG PLUS!

Available in matte white, matte black, or hound gray, the Alfredo espresso machine fits perfectly in any kitchen, break room, or small café! Pair it with a high-quality grinder, good skills, and premium beans, and the Alfredo espresso machine is sure to please with quality espresso!

Extraction/Shot timer

• Convenient located for your viewing during an espresso extraction

Steam Boost

• By quickly pressing the action button, the machine goes into ”Steam boost mode” for a maximum of 120 seconds, the machine’s steam boiler goes to the maximum pressure of 2.5 bar to have a truly impressive steam performance for this category of HX machines. By quickly pressing the button before the 2 minutes are up, you manually exit the Steam Boost mode.
• Usually, after a steam boost cycle, the machine is immediately ready at the right temperature, because the cycle lasts a maximum of 2 minutes, which is not enough to upset the thermal balance of the E61 group
• Please note that if you extract 3-4 espresso shots, and between each extraction you press the Steam Boost, the water in the grouphead of the Alfredo will overheat. Thus, a cooling flush will be required. Therefore, pull the 3-4 extractions in sequence, and then follow up with one steaming session to create the frothed/steam milk for the multiple milk-added espresso-based beverages.

4 Stage Programmable Temperature Settings

• Torre Espresso has established 4 average temperature levels which correspond to the following water temperatures at the outlet of the shower with a heated filter holder: LOW 90°C MID 92°C HIGH 94°C HOT 96°C.
• Use lower settings for darker roasts, and higher settings for lighter roasts.

Pre-Infusion Programming

• Helps saturate you coffee puck for an even flow and extract maximum flavor.
• Programmable pre-infusion from 0.5 to 5 seconds.

The Luigino TSP Heat Exchange  has more color options available then the Alfredo.   The Flow Control is included.  It has a smaller body then the Alfredo, with a rotary vane pump, but no plumbing options. The Alfredo TSP Heat Exchange  has a wider body style then the Luigino, and a vibration pump, but also no plumbing options.  Available with flow control, and also without flow control.

• The Alfredo uses lead free components.
  • Copper boilers with lead free brass fittings.
  • Lead free brass group.
  • Lead free brass taps.
  • Lead free brass filter holders.
• Effective Dec 6, 2024, Torre espresso machines can come with SSR Relays either from Panasonic or Carlo Gavazzi.
• Instruction manual: Our earlier batch of machines came with a manual which was for 4 models: Luigino, Pierino, Teresina, & Mariuccia. The closest model to the Alfredo is the Luigino. You can download the manual for the Alfredo. Also, the included instruction manual may be for the non-TSP models.

• Natural Wood Product Disclaimer: Wood components used on espresso machines are made from natural materials, so variations in grain, color, texture, and finish are normal. Minor imperfections, knots, and differences in appearance are inherent characteristics of genuine wood and are not considered defects. These natural variations do not affect the product’s functionality, durability, or performance. Each wood piece is unique, making every product one of a kind.

General Espresso Machine Notes/Warnings:

• Upon first use (tank/reservoir models): On the initial start-up (or after a long period of non-use), it is important to make sure the pump is removing water from the tank. When the machine is powered on, you will hear the pump running. After 5 seconds, squeeze the in-line hose in the tank (usually the longest hose, has a particle filter attached). if you hear a different sound, this means the pump is working correctly. If not, immediately power down the machine and contact us. For more information, visit this page General Manual Pump Priming.
• Electrical: To avoid electrical damage to this espresso machine which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. Without the recommended surge suppressor, the espresso machine can be damaged at the power switch, the electronics, the heating element, the pressurstat, or the wiring inside. For more information, visit this page Power Protection.
• Water: To increase the useful life and not damage your espresso machine, please use softened water. Softened water is water without calcium and magnesium, but still has other minerals for espresso extraction. Do not use distilled, purified, or reverse osmosis water as these types of water create oxidation with the metals and cause the same damaging effects as limescale. For more information, visit this page Water Choice.
• Descaling: We do not recommend descaling unless there is an issue with the espresso machine. Too much descaling can eat away at the metals and gaskets inside an espresso machine. As a preventative measure, we recommend using softened water as explained in the bullet point above.
• Backflushing: This procedure of cleaning the grouphead will need to be performed from time to time. For more information, visit this page Espresso Machine Backflush – Why 50?

• Instruction manual