Overview
Bezzera New Hobby PM Espresso Machine – Tank, Semi-Automatic, 110V
The Bezzera New Hobby PM Espresso Machine will allow you to make some of the best espressos, cappuccinos, lattes, and tea at home or a small office! Furthermore, this machine will perform so efficiently in its range! After all, this is thanks to its front panel controls, 3-liter tank, reliable grouphead, and 3-way solenoid valve to give this entry-level machine a semi-commercial quality.
The Bezzera New Hobby PM is a nicely compact and simple home espresso machine. Additionally, the machine includes a quality, high power steam wand to produce your favorite milk-based beverages. Seriously, it works absolute wonders in the steaming department! After every steaming session (approximately every 8-16 ounces of milk steamed/frothed), the “P” switch (pump switch) should be used to refill the internal boiler with water from the reservoir as this is not automatic in steam mode. The “P’ switch makes it easy to refill so the boiler’s heating element does not get damaged.
Moreover, this is one of the FEW espresso machines that consists of a “P” switch. Precisely, when you are ready to dispense your hot water, simply press the switch after rotating the hot water/steam knob counter-clockwise. Also, the “P” switch is able to fill the water in the internal reservoir. With the simplicity of the Bezzera New Hobby PM’s additional semi-automatic push switch features, you will operate this machine and maintain it with smooth sailing!
Videos


Features
Single Boiler, Dual Purpose System
- Nickel-plated brass boiler: The boiler is made nickel-plated brass which retains heat better than stainless steel. Nickel-plating helps to prevent limescale build-up. We highly recommend utilizing the optional water softener, the Ascaso V725!
- Dual-purpose: This means there is one boiler inside. The machine heats and rests in coffee mode. The steam switch will need to be depressed to get to steam mode.
Steam Wand
- Multi-directional: Allows for greater movement and flexibility at different angles. The wand is equipped with a rubber grip which helps you position the wand without burning your fingers.
- No-burn: Insulation is placed inside the steam wand to help prevent burns when quickly touching and moving the steam wand.
- 2 hole steam tip: Gives you a good amount of steaming power and helps create microfoam.
Tank/Reservoir System
- 3-liter capacity: While most home espresso machines are 2 liters, the Bezzera New Hobby PM holds up to 3 liters of water.
- Low water leveler: Display on the front right side, just above the cup holder grid. Includes a visible level signal to let you know when to refill.
- Removable: For easy refilling every two weeks.
Vibratory Pump
- Cost-effective: Pumps will degrade in performance over time. Replacing a vibration pump will be less costly than a rotary vane pump.
- Passive pre-infusion: The vibration pump takes up to 9 seconds to get up to full pump pressure. Hence, in those 9 seconds, the coffee is getting pre-infused.
- Up to 51 watts.
Semi-Commercial Features
- 3-way solenoid valve: Used to reduce pressure from the grouphead after brewing by excessive pressure built up in the portafilter. In addition, it drains from internally through underneath the drip tray.
- Single Bezzera commercial grouphead: Made with chrome-plated brass. The boiler heats up the Bezzera 58mm group.
Quality Construction
- Stainless steel body and frame: With a matte finish. The front and back panels have the Bezzera logo on top in small 3D print.
- Cup warmer: On top with a matte finish. It takes approximately 2 hours to heat cups up.
- Drip tray: With a matte finish. Additionally, consists of a cup holder grid and a drain tray.
- Cup storage: Right behind the drip tray. Espresso/demitasse cups can fit here.
Front Panel Controls from Left to Right
- Main power switch: For powering on and off the Bezzera New Hobby espresso machine. Warm-up time is approximately 10-20 minutes (depending on the environment).
- “P” switch (pump switch): Press this when you are ready to dispense hot water AFTER steaming milk. AFTER steaming milk and closing the steam valve, press this again to stop. This switch is also used in coffee mode to pump water out of the steam wand for Americanos.
- General temperature warning light: When the light is green, that means the machine is ready at an ideal temperature for espresso extraction.
- Coffee switch: Press to start and stop the espresso extraction. A yellow light will turn on and off on the bottom of the switch.
- Steam switch: Press and wait 30-60 seconds to warm up for steam mode. After the steaming session, turn the switch off and run water through the steam wand using the “P” switch. A yellow light will come on when this switch is active.
- Water/steam knob: Rotate counter-clockwise to prepare to dispense steam or hot water. After dispensing, rotate clockwise to close valve.
Accessories Included
- Bezzera 58mm dual spout portafilter: Designed with chrome-plated brass. The bottom side shows the Bezzera name. Black plastic handle and commercial-grade.
- Particle filter: Takes particles out to prevent the pump from jamming.
- Filter baskets: 1-cup stainless steel filter basket for making one cup of espresso, 2-cup stainless steel filter basket for making two cups of espresso, and blind filter basket for backflushing.
- Tamper: A cheap plastic tamper, common for most espresso machines to keep the overall selling price of the machine low. We recommend upgrading to a better 58mm espresso tamper.
- Scoop: Simple plastic scoop if using preground espresso coffee.
- Grouphead cleaning brush: For cleaning the grouphead gasket.
- Instruction manual: For operation and maintenance. Also, available in five different languages: Italian, English, French, German, and Spanish.
Specifications
| Terms & Conditions of Sale | Standard Terms |
|---|---|
| Warranty limited to manufacturer's defect | 30 days parts & labor |
| Brand | Bezzera |
| Height (inches) | 14, approximate |
| Width (inches) | 8, approximate |
| Depth (inches) | 9.5, approximate |
| Weight (pounds) | 22, approximate |
| Wattage (watts) | 1100 |
| Voltage (volts) | 110 – 120 |
| Boiler Type | Single Boiler, Dual Purpose |
| Boiler capacity (liters) | 0.25 |
| Tank capacity (liters) | 3 |
| Portafilter size (mm) | 58 |
| Country of manufacture | Milan, Italy |
| Burr Type | N/A |
| Condition | Refurbished |
| Doser | N/A |
| E61 Grouphead | No |
| Grinding Adjustment | N/A |
| Height Clearance | Under 18" |
| Operation | Semi-Automatic |
| PID Control | No |
| Water Connection | Tank / Reservoir |
Notes
General Espresso Machine Notes/Warnings:
- Upon first use (tank/reservoir models): On the initial start-up (or after a long period of non-use), it is important to make sure the pump is removing water from the tank. When the machine is powered on, you will hear the pump running. After 5 seconds, squeeze the in-line hose in the tank (usually the longest hose, has a particle filter attached). if you hear a different sound, this means the pump is working correctly. If not, immediately power down the machine and contact us. For more information, visit this page General Manual Pump Priming.
- Electrical: To avoid electrical damage to this espresso machine which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. Without the recommended surge suppressor, the espresso machine can be damaged at the power switch, the electronics, the heating element, the pressurstat, or the wiring inside. For more information, visit this page Power Protection.
- Water: To increase the useful life and not damage your espresso machine, please use softened water. Softened water is water without calcium and magnesium, but still has other minerals for espresso extraction. Do not use distilled, purified, or reverse osmosis water as these types of water create oxidation with the metals and cause the same damaging effects as limescale. For more information, visit this page Water Choice.
- Descaling: We do not recommend descaling unless there is an issue with the espresso machine. Too much descaling can eat away at the metals and gaskets inside an espresso machine. As a preventative measure, we recommend using softened water as explained in the bullet point above.
- Backflushing: This procedure of cleaning the grouphead will need to be performed from time to time. For more information, visit this page Espresso Machine Backflush – Why 50?
Support
Parts Diagram
No block ID is set
Reviews
Q & A
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
Purchased machine earlier this year around July/August timeframe. It was fine till yesterday the water not heating up. The pump still working when making espresso. But the product is completely cold. The machine casing completely room temperature. Then I packed and moved the machine from office to home. I undone the top cover and pushed on the red thermic safety reset button and I felt a click. After that when I plug in and turn it on it just trip the GFCI immediately. Any main suspect of faulty parts?
-
Q Purchased machine earlier this year around July/August timeframe. It was fine till yesterday the ...... Read more answer nowAsked by on November 18, 2021 2:26 pmAnswered by the admin
If the machine was drained, the heating element may have burned out - this is what trips the GFIC. You can read more.

