What’s Included
- Mazzer Mini A Espresso Coffee Grinder
- Grinder cleaning brush
- Double-sided aluminum tamper
- Instruction Manual
Save $200!
While Supplies Last
Mazzer Mini A Electronic Time-Based Espresso Coffee Grinder
$1,295.00 $1,095.00
What’s Included
- Mazzer Mini A Espresso Coffee Grinder
- Grinder cleaning brush
- Double-sided aluminum tamper
- Instruction Manual
Overview
Mazzer Mini A Electronic Espresso Coffee Grinder
Since 2005, Mazzer has been one of our top recommendations for customers who want the best in terms of build quality and longevity. The Mazzer Mini Type A is one of the popular models. The on-demand controls are simple to understand and don’t require a barista to operate. Its large 64 mm flat burrs make grinding production very quick and efficient. Whether entertaining guests at home or using it in a low-demand coffee shop, the Mini Type A can grind to your expectations. One of our favorite aspects of Mazzer grinders is that once we sell one, we never see it again.
The Mazzer Mini Type A is very similar to the Type B. The hopper, burr size, motor, body style, tray, & price are all the same. The only difference is the on-demand controls. The Type A controls are on top of the funnel. All settings and grind operations are controlled by hand. The Type B controls are underneath the funnel. The settings are controlled by hand and grind operations are controlled by your portafilter. Choosing between the 2 grinders is all a matter of preference.
Videos
Coming soon…
Features
Grinder Burrs
- Flat burrs: Large size at 64 mm. The larger the size, the more of a grinding surface, resulting in faster production. Made of tempered steel for long-lasting durability.
- High rpm: A very fast spinning rate at 1600 rpm. The higher the speed, the faster the production, which can increase efficiency and reduce wait times.
- Easy access: Remove the bean hopper. Turn the grinding adjustment to the coarser direction until the top assembly comes off. This will give you access to the burrs and the grinding chamber. Allen key screws hold these burrs in place.
On Demand Controls
- Updated design: All the buttons are in the same places as the previous version, but now with a new sleek design.
- Multiple dosing options: Press the left “1” button for a single dose. Press the right “2” button for a double dose. Hold the center hand button for semi-automatic dosing.
- Time-based grinding: You can adjust the grind time for each automatic dose up to 99.95 seconds max. Hold the upper left “menu” button until the display starts to blink. Then select the “1” or “2” dosing button. Use the “up” and “down” arrows to change the time. You can make very tiny adjustments by 0.05-second increments.
- Dosing count: This helps keep track of usage. Displays the total count of automatic doses, not manual doses. Single doses will add 1 to the tonal count. Double doses will add 2 to the total count.
Grinder Adjustment
- Stepless: Infinite number of grind settings which allows you really fine-tune your grind for espresso.
- Upgraded Adjustment Dial: The new dial is a little bigger and etched with an indicator that tells you how to adjust the grind settings. Turn to the smaller circle (counter-clockwise) for a finer grind. Turn to the larger circle (clockwise) for a coarser grind. The entire dial has numbers so you can remember your current grind setting easier.
- Upgraded Adjustment Lever: The new lever is a little longer to make adjustments easier. There are 5 positions where you can install this lever. Once you find your correct grind setting, you can move the lever to another position. This is so it won’t stick out the sides of the grinder.
Bean Hopper
- Low Profile: We request the shorter hopper for our Mazzer Mini models to make them easier to fit underneath kitchen cabinets. The total height of the grinder without the hopper is ~12.5″. The bean hopper adds another 5″ bringing the total height to approximately 17.5″. The total capacity is ~300 grams of whole coffee beans.
- Set Screw: Secures the hopper to the grinder. Serves as a reminder for users from quickly removing the hopper if it is full of beans.
- Finger Guard: Prevents users from “accidentally” putting their fingers in the grinding burrs.
- Stopper: A door near the bottom of the hopper can be pushed in to close the opening. This allows you to remove the hopper with beans inside so you can easily change the beans. There will be some beans already passed in the burrs which will have to be ground out first before removing the hopper.
Portafilter Fork
- Ease of use: Allows you to rest your portafilter while grinding for a complete hands-free operation. Accommodates most portafilters. The clearance from the fork to the funnel is approximately 2.5″.
- Removable: You can remove the fork if you wish to grind into a container. There are 2 Phillips screws that hold the fork in place. The clearance underneath the funnel is approximately 5.25″.
Grinds Catch Tray
- Convenient: As easy as it is to install, it’s just as easy to remove to discard any excess grinds. This simple part will help keep your kitchen counter top clean. There are other comparable models that do not have a tray at all.
- Easy to “install”: There are no screws or hooks. The tray form fits to the front legs of the grinder. If you need to slide your grinder over on your counter, the tray moves with it.
Specifications
| Brand | Mazzer |
|---|---|
| Height (inches) | 17.5, approximate |
| Width (inches) | 6.75, approximate |
| Depth (inches) | 13.5, approximate |
| Wattage (watts) | 250 |
| Voltage (volts) | 110 – 120 |
| Burr size (mm), Type | 64, flat |
| Grinding speed (RPM) | 1600 |
| Hopper capacity (grams) | 300 |
| Country of manufacture | Italy |
| Approvals | ETL |
Notes
Espresso Coffee Grinder Warnings:
- Roast Profiles: Espresso grinders sold by 1st-line Equipment, unless specifically indicated on the grinder page, are manufactured for coffee beans that have Italian or espresso roast profiles. Lighter roasted coffee beans may clog the grinder or not grind fine enough. Darker roasted coffee beans, such as French roasted or oily coffee beans, may clog the grinding chamber and/or the grinder chute where the ground coffee exits.
- Changing grind settings: It is very important to only change grind settings when the unit is powered on and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and render the grinder to only produce very coarse grinds or no grinds at all. To remedy this, you will have to open up the grinder to get access to the grinding burrs. This issue will be considered operator error for lack of following directions, and not be classified as a defective grinder.
- Electrical cord: For most grinders, the cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish/slice to damage the cord.
- Finding coffee grinds in a new grinder: Most manufacturers test their grinders with coffee beans before they leave their facility. Unfortunately, they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging.
- Static issues: There are static issues with all grinders, even the highest-quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, try using a different blend of beans.
- Electrical: To avoid electrical damage (which is not considered a manufacturer's defect), please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. A surge without protection can damage a grinder at the power switch, the capacitor, the motor, or the wiring.
- Burr cleaning: For routine maintenance of the grinding burrs, we recommend using grinder cleaning agents. We do not recommend any removal of the burrs or the burr carrier for cleaning (unless necessary) as re-assembly can cause damage. If the grinder chamber is dis-assembled, the warranty is voided for any damages that result. It is important to always remove all coffee grinds from the threads of the burr carrier and the grinding chamber.
- Replacing burrs: NEVER use a flat head screwdriver and hammer to wedge UNDER the burrs for removal. This could badly damage your grinder.
Support
Parts Diagram
No block ID is set
Reviews
Leave your review
Q & A
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
There are no questions yet. Be the first to ask a question about this product.
