- Standard ground shipping within the contiguous 48 states. Alaska & Hawaii shipping costs extra.
- Total order must be over $99 after all discounts.
- For more information, please see Shipping Included.
Lelit MC047Sil 57mm Silicone Portafilter / Grouphead Gasket – PL41/PL041
$9.86
- Must be logged into your online account when purchasing to accrue EspressoPoints.
- For more information, please visit EspressoPoints.
- Parts are non-returnable and non-refundable unless damaged in transit.
- Parts do not include any over the phone technical support or instructions other than what is provided on the website.
- Parts do not come with any warranty.
- For more information, please see Terms & Conditions.
Frequently Bought Together
Lelit MC047Sil 57mm Silicone Portafilter / Grouphead Gasket for PL41/PL041Anna Espresso Machines
This gasket (MC047Sil) will fit most versions of the PL41 Anna models. This includes the PL41, PL41QE, PL41TQE, & PL41TEM versions.
Before, Lelit made 2 versions of this portafilter gasket. The MC047Sil is clear and made of silicone. Presently, this is the current gasket that the manufacturer Lelit uses in its production of the PL41 models. This gasket creates a more superior seal than the MC047.
The MC047 is black and made of rubber. This was the original portafilter / grouphead gasket of the PL41 models. Lelit no longer manufacturers this version of the gasket.
Please also note the SKU is not MCo47. The “0” in the SKU is a zero, not the letter O.
SPPMC047Sil
[ls_content_block id=”24679″]Lelit MC047Sil 57mm Silicone Portafilter / Grouphead Gasket – PL41 / Anna
| Brand | Lelit |
|---|---|
| Portafilter size (mm) | 57 |
Leave your review
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
I have a pasquini livietta T2 I'm looking for a Group Head Gasket. I have the old one that measures about 73MM OSD X 57MM ISD X 4MM Thick. I was wondering what the dimensions of the Lelit MC047Sil 57mm Silicone Portafilter / Grouphead Gasket – PL41 is. Do you know if this Gasket fit a pasquini livietta T2 or do you know of one that will fit the pasquini livietta T2.
-
Q I have a pasquini livietta T2 I'm looking for a Group Head Gasket. I have the old one that measur...... Read more answer nowAsked by on April 1, 2022 1:34 pmAnswered by the admin
Hi,
Sorry, we don't have the tools to do exact measurements. We order parts from the diagrams provided and list them for the corresponding models. We normally do not check to see if parts can be swapped with other similar parts. However, we did at one point try this gasket on an Ascaso Dream 57mm grouphead and it did not fit. We took a picture of the gasket with the ruler we have.
A I can confirm, YES it perfectly fits with the Pasquini Livietta T2. The thickness (about 4mm) and the difference between the inside and outside diameter (about 8.5mm) are spot-on identical. Where they are different is the unstretched outside diameter which is slightly smaller but I believe it is about identical once it's stretched onto the group head. Because of this difference, I believe it forms a better seal than the factory Pasquini gaskets as those can actually spin once they're on the group head.
Before installing this silicone gasket, is it recommended to use a silicone seal lubricant (food grade)?
-
Q Before installing this silicone gasket, is it recommended to use a silicone seal lubricant (food ...... Read more answer nowAsked by on August 25, 2021 8:56 pmAnswered by the admin Any high temp food grade will do.
How do I install this in my PL41qe ?
-
Answered by the admin
Please look for the Lelit Technical Support page related to this.
I recently purchased a MC047Sil gasket for my Lelit PL41QE (order #233274). However, it seems to be too stiff and I have to pull quite tight to stop the portafilter from leaking, and even then some water seems to leak still. Do you have any suggestions for dealing with this, such as how to help break in the the silicon gasket?
-
Q I recently purchased a MC047Sil gasket for my Lelit PL41QE (order #233274). However, it seems to ...... Read more answer nowAsked by on May 6, 2021 11:48 pmAnswered by the admin
First, if a new gasket leaks, it means too much coffee in the basket and/or too fine a grind in the basket. Otherwise, it can be a worn grouphead or portafilter if the machine is older.
Will this fit the Lelit Grace PL81T? Thanks
-
A From what I can see, your model uses part 8700018 which is 8mm thick, the MC047 appears to be 4mm thick. Don't think it will workAnswered by the admin
We have never sold the PL81T and it has not been available in the USA. Hence, we are unable to confirm a parts fitment. It is best to contact Lelit directly or the dealer you purchased from.
I ordered this part for my Lelit PL41LEM. It does not fit, in spite of your statement that it fits all Lelit PL41 series. Do you have the correct part for the Lelit PL41LEM? I would like to exchange the wrong part you sent me.
-
Q I ordered this part for my Lelit PL41LEM. It does not fit, in spite of your statement that it fit...... Read more answer nowAsked by on July 20, 2020 7:09 pmAnswered by the admin
Sorry, the LEM was never sold in the USA and we did not think there were units here. This is why we made this statement. It seems like the LEM has a 58mm portafilter, and not the 57mm size that we state for this gasket in the title.
When will this be restocked?
Is there an alternate company product that I can use to replace this in my machine while it’s out of stock?
-
Q When will this be restocked? Is there an alternate company product that I can use to replace this...... Read more answer nowAsked by on June 10, 2020 8:19 pmAnswered by the admin Sorry, COVID19 has put a strain on getting replacement parts from all European manufacturers. We have a shipment on the way, and we hope they arrive here by July 2020.
Will this fit the older pl42 from 2008?
-
Answered by the admin
Sorry, we never sold this model, and thus we could not guarantee a gasket at this time. It is best to find a parts diagram for your unit model, and check for the correct part number.
Does it have to be put in a specific orientation? Are there ridges for example?
-
Q Does it have to be put in a specific orientation? Are there ridges for example? answer nowAsked by on April 13, 2019 3:13 pmAnswered by the admin
It can go in either side.
What are the inner and outer dimensions?
-
Answered by the admin
Sorry, we do not take measurements on parts. This part is solely intended for the machine it is described for in the title.
A Looks to be 75mm OD, 56mm Editor's Response: Please note that 1st-line does not guarantee these measurements.
