- Standard ground shipping within the contiguous 48 states. Alaska & Hawaii shipping costs extra.
- Total order must be over $99 after all discounts.
- For more information, please see Shipping Included.
-44%
Lelit 9600105 Water Level Probe – Used
$79.91 $45.00
- Must be logged into your online account when purchasing to accrue EspressoPoints.
- For more information, please visit EspressoPoints.
- Parts are non-returnable and non-refundable unless damaged in transit.
- Parts do not include any over the phone technical support or instructions other than what is provided on the website.
- Parts do not come with any warranty.
- For more information, please see Terms & Conditions.
This product is already in your quote request list.
SKU: MC9600105
Categories: Espresso Parts, Lelit Espresso Machine and Espresso Grinder Parts, Lelit Espresso Machines & Related Parts
Lelit 9600105 Water Level Probe – Used
This water level probe (9600105) is for the Lelit Mara X (PL62X) espresso machine models and most Lelit Bianca versions. This part was removed from a new (never used), damaged boiler.
This part is also replaces SKU 9600105L1 and 9600088.
SPP9600105
| Brand | Lelit |
|---|
Parts Terms & Conditions
Please read the Parts Terms & Conditions below before ordering this part or any other part on our website.
Purchasing Parts
- Parts are non-returnable and non-refundable unless damaged in transit. Exchanges for parts "damaged in transit" are applicable so long as:
- You must report the damage(s) to 1st-line within the first five business days of delivery receipt.
- Pictures of the original box and part(s) are provided.
- Damages made by the customer or the customer's authorized/hired repair person from improper handling or installation are the customer's responsibility.
- Neither manufacturer nor 1st-line Equipment provides any warranty or guarantee on parts.
- The customer agrees to waive all rights, where applicable by law, for all claims such as:
- Not as described.
- Defective merchandise.
- Not fit for the intended use.
- No longer fit for the intended use.
- Incorrect merchandise received.
- Please note we store parts in bins and they can arrive with cosmetic imperfections (ie scratches, nicks, etc).
- Although we try our best to recommend the proper parts, clients agree to pay for return shipping charges for parts, including cases where errors are made in recommendations and ONLY whereby exceptions are made allowable by 1st-line Equipment, LLC in writing and with a Return Authorization (RA) Number.
Support for Parts
- Parts purchases do not include any technical support in any form and/or instructions in any form.
- DUE TO THE NATURE AND COMPLEXITY OF EQUIPMENT AND NOMENCLATURE USED TO DESCRIBE PARTS, THERE IS NO PERSON AVAILABLE AT 1ST-LINE CAPABLE AND KNOWLEDGEABLE ABOUT THE 50,000+ DIFFERENT PARTS FOR ALL ESPRESSO MACHINES AND GRINDERS. BASED ON THIS, 1ST-LINE PERSONNEL IS NOT ABLE TO OFFER ANY PARTS ASSISTANCE VIA PHONE.
- The purpose of the email request is to allow us time to research the part. This also creates a paper trail in case of any mistakes or necessary clarification. We find this process works well and increases customer satisfaction since fewer mistakes are being made.
Parts Descriptions
- Although we make our best effort to describe parts, please don't assume a part will fit your machine. Some models have different versions with different parts. If you are unsure of which part to order, please use our contact page with your make and model of machine for assistance. Although we can't guarantee a part will fit because we do not have the machine in front of us, we will make our best effort to assist via email.
- Please note that manufacturers will source and supply parts different from the original equipment. Although we make our best effort to describe parts, changes can occur by the manufacturer without any notice to 1st-line or to you. For example, a manufacturer may initially supply 110-volt heating elements with 1200 watts but later change to 1300 or 1400 watts without notice. Another example is that an initial parts replacement may have a Parker branded solenoid valve, but subsequent shipments may have Lucifer or ODE solenoids without notice. 1st-line Equipment will NOT be held responsible for any changes in the part supply, nor advertising in these types of discrepancies.
Leave your review
Rating
Publish review
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
I need to replace part 9600088. This sensor is listed as being applicable for that, but it should be a temperature probe with the relevant wiring from the top. This image does not accurately reflect that. Could you please confirm this can be used to replace the temperature probe on top of the boiler unit? I have a Lelit MaraX PL62X, it is throwing the error light: Temperature sensor NTC1 disconnected or damaged. I checked the probe using an Ohm meter and it measured ~150ohm, and was fluctuating up and down with temperature changes.
-
Q I need to replace part 9600088. This sensor is listed as being applicable for that, but it should...... Read more answer nowAsked by Eric Henderson on May 11, 2026 11:20 amAnswered by the admin
This is the water level refill probe, not a temperature sensor probe. Please follow our guidelines to determine the correct part(s).
Is this part compatible with a lelit elizabeth v2?
-
Q Is this part compatible with a lelit elizabeth v2? answer nowAsked by Antony on March 2, 2026 2:04 pmAnswered by the admin
According to information from Lelit, this part is compatible with the Version 2 Elizabeth.
Would a failure of this part be a likely cause of the pump running excessively, even after both boilers are filled? (Lelit Elizabeth V3) Thank you!
-
Q Would a failure of this part be a likely cause of the pump running excessively, even after both b...... Read more answer nowAsked by Jonathan R on March 7, 2025 12:25 pmAnswered by the admin
It can be this part (which needs cleaning or replacement), or the attached wire or the brain unit or the ground wire under the reservoir.
Will this fit the Lelit Bianca v2 on the parts diagram it is 85mm?
-
Q Will this fit the Lelit Bianca v2 on the parts diagram it is 85mm? answer nowAsked by Luan on June 22, 2024 11:10 amAnswered by the admin
According to our notes from Lelit, this part should be a good replacement for the Bianca.
Steam leaks from my current probe, even after descaling. Can I put teflon tape on to reduce leakage? Or better to buy a replacement?
-
Q Steam leaks from my current probe, even after descaling. Can I put teflon tape on to reduce leaka...... Read more answer nowAsked by Dan on September 27, 2023 8:53 amAnswered by the admin
If leaking at the threads, then clean threads and use plumbers tape. If leaking at the poly sheathing, then a replacement is required.
Your parts digram for a pl62s 900050 will this will this 9600105 work
-
Q Your parts digram for a pl62s 900050 will this will this 9600105 work answer nowAsked by Wally Thomson on December 9, 2022 12:14 pmAnswered by the admin
If parts have different part numbers, then they are usually not interchangeable.
Please visit one of the links below for more Lelit products & information.
Equipment & Accessories
Equipment
View other products from Lelit.
