-20%
Picture of Eureka Olympus 75E Espresso Coffee Grinder - Stepless, Doserless, Titanium Burrs

Eureka Olympus 75E High Speed Espresso Coffee Grinder with Titanium Burrs

$1,499.00 $1,199.00

Request a price match.
SKU: Olympus75E-cr Categories: , , , , , , Tags: ,
Earn 1499 EspressoPoints worth $44.97! (Learn about EspressoPoints)
Earn 1499 EspressoPoints worth $44.97! (Learn about EspressoPoints)

Frequently Bought Together

Picture of Eureka Olympus 75E Espresso Coffee Grinder - Stepless, Doserless, Titanium Burrs + Eureka Atom Blow Up System
Price for both: $1,318.00

Eureka Olympus 75E High Speed Espresso Coffee Grinder with Titanium Burrs

The Eureka Olympus 75E delivers espresso doses at lightning speed as if the Olympian God Zeus was working this grinder! If you are looking for a grinder for a busy restaurant or cafe and will be making A LOT of espresso at once, then the Eureka Olympus will be great for your need!

After all, with 75mm flat titanium burrs, an 800-watt motor, grinding speed of 1700 RPM, you will be making fast and consistent grinds in no time! Additionally, make sure you have room on that counter space because the Eureka Olympus 75E measures a whopping 19.5 inches tall! Overall, Eureka is known to design technologically innovative espresso grinders to give you the best commercial feel in terms of design and reliability, so learn more about the Eureka Olympus 75E and consider this beauty today!

Grinding adjustment

Grinding adjustment

  • Stepless – Gives you an “infinite” range of settings that allow you to really fine-tune your grind to your espresso machine. Turn clockwise for a finer grind and counterclockwise for a coarser grind.
  • Perfect positioning – The adjustment knob is located on the top right of the grinder, underneath the bean hopper. This helps keep the overall width of the Olympus 75E  low compared to other grinders that have it on the side. This also protects it from hitting against other equipment.
Bean hopper

Bean hopper

  • Short – The short hopper holds approximately 1 lbs. of whole coffee beans and keeps the height down to 19 1/4″.
  • Finger guard – prevents users from “accidentally” putting their fingers in the grinding burrs.
  • Set screw – Secures the hopper to the grinder. Prevents users from quickly removing the hopper, spilling beans everywhere.
Electronic controls

Electronic controls

  • Color display – When semi-automatic dosing, the display switches to a picture of a grinding burr with a timer in the center. It will count up by 0.1-second increments until you stop. When electronic dosing, the screen will highlight whether you select “1-cup” or “2-cup”. The timer will count down when you start the grinding cycle.
  • Time-based grinding – For single and double shots. The “1-cup” mode can adjust from 0.5 seconds to 25 seconds. The “2-cup” mode can adjust from 0.5 seconds to 35 seconds. You can adjust the time by 0.1-second increments. The semi-automatic mode tracks the time from start to stop.
  • Rotative Power Switch – This espresso grinder is turned on or off from the rotative power switch on the right side of the grinder. Also, there is an indicator light that illuminates when powered on.
Portafilter fork

Portafilter fork

  • Portafilter fork – Used mainly for espresso grinding. There is a built-in lip that helps hold most portafilters in place. We have tested E61 58mm portafilters, but smaller diamters 53mm or less may not work as well. The fork can be raised up and down by loosening the holding screw with the included Allen key. Once the fork is in the right position, then you can tighten the fastening screw. (Portafilter Not Included).
  • Lighted Spout – The spout area has lights so the grind quality can be seen better when grinding

Grinding burrs

  • Flat grinding burrs – Large size at 75 mm. The larger the size, the more of a grinding surface, resulting in faster production. The burrs are made of a long-lasting TITANIUM.
  • High rpm – Fast spinning rate at 1700 rpm. The higher the speed, the faster the production, which can increase efficiency and reduce wait times. Espresso grinding is approximately 4.5 – 5.5 grams / second, but depends on beans, voltage, and grind fineness.
Notes
  1. The hole at the bottom of the bean hopper does NOT closely align with the holding screw.
  2. The bean stop flapper is difficult to keep in an open position.

Espresso Coffee Grinder Warnings:

  • Changing grind settings: It is very important to only change grind settings when the unit is powered on and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and render the grinder to only produce very coarse grinds or no grinds at all. To remedy this, you will have to open up the grinder to get access to the grinding burrs. This issue will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  • Electrical cord: For most grinders, the cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish/slice to damage the cord.
  • Finding coffee grinds in a new grinder: Most manufacturers test their grinders with coffee beans before they leave their facility. Unfortunately, they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging.
  • Static issues: There are static issues with all grinders, even the highest-quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, try using a different blend of beans.
  • Electrical: To avoid electrical damage (which is not considered a manufacturer’s defect), please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. A surge without protection can damage a grinder at the power switch, the capacitor, the motor, or the wiring.
  • Burr cleaning: For routine maintenance of the grinding burrs, we recommend using grinder cleaning agents. We do not recommend any removal of the burrs or the burr carrier for cleaning (unless necessary) as re-assembly can cause damage.
  • Replacing burrs: NEVER use a flathead screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.

Specifications

Brand

Eureka
Height (inches)

19.5, approximate
Width (inches)

9.5, approximate
Depth (inches)

11, approximate
Weight (pounds)

28, approximate
Wattage (watts)

800
Voltage (volts)

110 – 120
Burr size (mm), Type

75, flat
Grinding speed (RPM)

1700
Country of manufacture

Italy
Please visit one of the links below for more Eureka products & information.
Equipment & Accessories
 
Parts & Diagrams
 
Technical Support
 

Finding your part
  • Please use the parts diagrams provided below to determine the part(s) you need. Then use our search box above to find the part(s) on our website. If no results come up, more than likely we do not stock the part.
  • If uncertain, please go to the equipment model or part product page. Then use the Q&A tab found on that web page to ask your question.
  • Lastly, and only if the first 2 options were exhausted, please use our parts inquiry page.
  • Our call center does not have the training to handle parts inquiries for over 60,000 different parts items. Asking any questions regarding parts will more than likely result in you being referred to the above steps.
  • Please note also that all parts purchases are non-returnable or refundable and do not include technical support, instructions, or warranties as the purchase price of any part does not cover the cost of technical support. Technical support is available for repairing equipment in our shop.
  • Sorry, we will only special order a part for a model we carry AND was purchased through our supply chain.
  • Since we are unaware of the mechanical, electrical, and/or plumbing expertise of a parts buyer or the tools owned by a parts buyer, we are never able to advise if a self-repair can be performed.
parts-diagram-Olympus-75-E-HS
#
1005.0110
1005.0220
1005.0240F5A
1005.1240
1005.1250
1005.2110
1005.2220
1005.4220
1005.6220
1005.7220
1011.1000
1011.5000
1013.0060
1013.1400
1013.1600
2130.0030
2514.0005
2560.0002EKIT22014F
2560.0002EKIT22016F
2560.0002KIT110
2560.0003
2560.0004KIT
2560.0013
2560.0100KIT
2560.0200KIT
2560.0300KIT
2560.0400KIT
2560.0500KIT
2560.4500KIT
2570.0009KIT-OLY
4114404.1000-OLY
4114404.1000-XXX
4124404.3000
4124404.1000-951
4124404.1000-XXX
4124404.2000-951
4124404.2000-XXX
4400.0001-OLY-951
4400.0001-XXX
4400.0009
4400.0019
4400.0020C
4400.0020-XXX
5500.0008
4400.0100KIT
4400.5100
4400.5200
4402.8000
4410.0001EUR02-XXX
4410.0002EUR02-XXX
5214.0000
5210.0000
5210.0003
5215.0000
E25v2001/P
E25-55x55v2001-NR

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Eureka Olympus 75E High Speed Espresso Coffee Grinder with Titanium Burrs”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      Hi, do you guys know where you can get a parts diagram and any spare parts of this specific model (Olympus 75E on demand grinder) and if so do you have a link (you don’t appear to have this one on your support pages yet). Unfortunately the Double Shot button and the “+” button on my machine are becoming a little temperamental and often when you press them it doesn’t always register, so you end up pressing it twice (or multiple times). Not sure if there could be some dirt on the contacts or if I’d need replacement parts but surprisingly (for a commercial grade machine) I can’t seem to find details anywhere, including Eureka 1920’s website, so I came to you guys as you’re great at keeping this sort of information. Any ideas? Thanks Steve
    1. 0 votes
      Q Hi, do you guys know where you can get a parts diagram and any spare parts of this specific model...... Read more answer now
      Asked by Steve Dixon on May 18, 2022 6:12 pm
      Answered by the admin

      It is best to contact Eureka directly.
      2. Does the Eureka Olympus 75E grinders you have in stock have the little (red) push button on switch on the right near the very bottom - next to the time adjuster knob -- I think this might have been added to later models
    2. 0 votes
      Q Does the Eureka Olympus 75E grinders you have in stock have the little (red) push button on switc...... Read more answer now
      Asked by Joel on August 16, 2021 11:37 am
      Answered by the admin Our current stock has the red light. However, this is NOT a push button.
      3. One question I forgot to ask re the Eureka Olympus 75E grinder -- does it have the little push button on switch on the right near the very bottom - next to the adjuster knob -- I think this might have been added to later models...
    3. 0 votes
      Q One question I forgot to ask re the Eureka Olympus 75E grinder -- does it have the little push bu...... Read more answer now
      Asked by Joel on August 10, 2021 11:44 am
      Answered by the admin Our current stock has a red light, not a switch or push button.
      4. RE: Eureka Olympus 75E High Speed Espresso Coffee Grinder – Stepless, Doserless, Titanium Burrs $xxxxx (price removed as it can change in the future) -- is this correct that it has the Titanium Burrs? Most of them come with the steel burrs - are these aftermarket and is the listing correct? Thanks
    4. 0 votes
      Q RE: Eureka Olympus 75E High Speed Espresso Coffee Grinder – Stepless, Doserless, Titanium Burrs $...... Read more answer now
      Asked by Joel on August 9, 2021 11:44 am
      Answered by the admin We order these grinders with the Titanium Burrs directly from Eureka. We believe that a great grinder at this price should have these better burrs.

    William S. from United States (US) purchased

    Lelit PLA472A 57.35mm Pre-tamp Coffee Leveler

    16 hours, 36 minutes ago