Frequently Bought Together
Need to use single dose E.S.E. pods for decaf, then purchase with a pod portafilter
- Instruction Manual (Cod. 9941082.08 ed. 09/20 rev.00)
TABLE 1
TABLE 2
TABLE 2A – (up to 30/10/2012)
TABLE 2A – (from 31/10/2012)
TABLE 3
TABLE 4 – (up to 28/01/2014)
TABLE 4 – (from 29/01/2014)
TABLE 5 – PM (up to 30/11/2015)
TABLE 5 – PM (from 01/12/2015)
TABLE 5A – PM PID
TABLE 6 – (up to 02/12/2012)
TABLE 6 – (from 03/12/2012)
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
Would natural spring water be okay? Brand arrowhead for example?
-
Q Would natural spring water be okay? Brand arrowhead for example? answer nowAsked by on October 15, 2022 8:57 pmAnswered by the admin
Sorry, we are unable to recommend any brand of waters as we are not water experts and these bottling companies can use different sources to fill their bottles. We only recommend waters that are softened to less than 1 French degree and have a TDS between 80-1220ppm (and you can still have issues with this target). Any type of purified, RO or distilled water should be avoided as these will create issues as well.
Does the Magica also have the heating element on the group head and faster warm up time like the BZ10 ?
-
Q Does the Magica also have the heating element on the group head and faster warm up time like the ...... Read more answer nowAsked by on February 18, 2022 11:46 amAnswered by the admin
Sorry, it does not.
My Bezzera Magica is about 3 months old. The hot water wand output has a brown tint to it. I have not descaled the machine and don't intend to. Any suggestions?
-
Q My Bezzera Magica is about 3 months old. The hot water wand output has a brown tint to it. I have...... Read more answer nowAsked by on September 24, 2021 8:02 amAnswered by the admin
From our experience across many different espresso machines, black and brown particles are a result of the mineral in the water and these customers also stated a metallic taste.
Several years ago, we had a customer who owned a Silvia espresso machine for about 10 years. He decided to replace it with a new Rancilio Silvia. After receiving the new Silvia, he complained that black and brown particles were coming out of the hot water wand, but not the grouphead and he stated that he never had this issue with his old Silvia. The problem was that his old Silvia had a PFTE coating on the inside of the boiler and the water would not react with the boiler wall. After flushing the new machine with a different water, the problem of the particles and taste went away.
Although we definitely not water experts, our research has shown this to be magnesium in the water.
In other cases, the brown tint was from milk siphoning back into he boiler from steaming. This is why we recommend taking 4 ounces of hot water from the boiler at least once per day or once per week (no steaming at all), depending upon how often the machine is used to steam milk.
how do you get the (right) gage on the Magica out? It is hard to reach the bolts because the left gage is in the way, but even so, it is so tight I can't get it to move. I am afraid of breaking the sensor wire by turning it too much.
-
Q how do you get the (right) gage on the Magica out? It is hard to reach the bolts because the left...... Read more answer nowAsked by on September 3, 2021 2:28 pmAnswered by the admin Unfortunately, there are no instructions by the manufacturer how to change parts. Changing parts can be difficult, and there is no easy way unless the parts in the way are removed. In some cases, it is better to find a local repair center to change the parts.
This machine seems to have an E61 group. Can the user pre-infuse by partially opening the infusion valve?
-
Q This machine seems to have an E61 group. Can the user pre-infuse by partially opening the infusio...... Read more answer nowAsked by on April 17, 2021 10:03 amAnswered by the admin Yes, the barista can lift the lever partially up. However, there is only pre-infusion from the little steam pressure created in the heat exchanger. This feature of the lever works better on machines that are plumbed in. On tank only models with vibration pumps, the pre-infusion is kinda built in to the pump. The reason is that it takes up to 9 seconds for the vibration pump to build pre-infusion at the grouphead.
I ordered a Bezzera Magica and I'm having problems with the machine: the PID display turns on/off frequently, randomly.
I understand this may be related to no water detected, and water softness. I am sure the tank is full and I started using bottled water (crystal geyser) to exclude this problem.
The issue persists.
What do you suggest to address the problem? I'd prefer to not return the equipment, but the machine is unusable in this state as it's impossible to predict when the machine will be warm and ready
-
Q I ordered a Bezzera Magica and I'm having problems with the machine: the PID display turns on/off...... Read more answer nowAsked by on June 18, 2020 3:32 pmAnswered by the admin
The Bezzera Magica PID espresso machine is very sensitive to water type used. Please watch our video as we go over how the incorrect water can shut the machine down and make it inoperative. Previous customers who had the same issue have resolved the issue by finding and changing to a water that can satisfy the requirement of the built-in safety features that prevent machine damage.
Can we install flow control lever and manometer on the group head? And do you have these parts?
-
Q Can we install flow control lever and manometer on the group head? And do you have these parts? answer nowAsked by on March 18, 2020 5:25 pmAnswered by the admin
Yes, you can install it, but we never guarantee that it will work.
Answered by the adminPlease search for Bianca kit on our web site.
Do you have operational video on the 'Magica'?
-
Answered by the admin
Sorry, we do not at this time.
Reviews
There are no reviews yet.