Frequently Bought Together
Enhance your Rancilio Silvia M Espresso machine with 1st-line's IMS Competition Dispersion Screen
| Brand | Rancilio |
|---|---|
| Height (inches) | 13.5, approximate |
| Width (inches) | 9, approximate |
| Depth (inches) | 11, approximate |
| Weight (pounds) | 31 |
| Wattage (watts) | 950 |
| Voltage (volts) | 110 – 120 |
| Boiler capacity (liters) | 0.35 |
| Portafilter size (mm) | 58 |
| Tank capacity (liters) | 2 |
| Approvals | UL |
Espresso Machine Warning:
- ELECTRICAL WARNING: To avoid electrical damage to this espresso machine which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. the lack of the recommended surge suppressor, the espresso machine can be damaged at the power switch, the electronics, the heating element, the pressurstat or the wiring inside.
- WATER WARNING: To increase the useful life of and not damage your espresso machine, please use softened water. Softened water is water without calcium and without magnesium, but still has other minerals for espresso extraction. Do not use distilled water, purified water, nor reverse osmosis water as these types of water create oxidation with the metals and cause the same damaging effects as limescale.
- DESCALING WARNING: We do not recommend descaling unless there is an issue with the espresso machine. The reason is that too much descaling can eat away at the metals and gaskets inside an espresso machine.
Customer reviews
Add a review
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
Does this Rancilio Silvia M Espresso machine have portafilters made for espresso pods?
-
Q Does this Rancilio Silvia M Espresso machine have portafilters made for espresso pods? answer nowAsked by on December 4, 2023 10:54 amAnswered by the admin
Usually, a pod kit is needed. When purchasing this level of espresso machine, beans ground fine for espresso works best. Using espresso pods is like putting 50 octane fuel into a high end sports car.
Older machine. Rancilio Silvia. has been stored for a while. All the lights turn on but motor doesn't turn on? So I hear no noise? Water is coming through the frother line.. I've checked all the lines nothing's burnt or frayed or disconnected... And the machine heats up! It gets hot! Let me know your thoughts?
-
Q Older machine. Rancilio Silvia. has been stored for a while. All the lights turn on but motor doe...... Read more answer nowAsked by on August 18, 2023 12:57 pmAnswered by the admin
First, do not warm up a machine that the pump motor does not work. There is a risk of burning the heating element. Second, if the mchine is older than 5 years, it is probably best to have a professional evaluate it and check the pump.
I have a Silvia around the year 2000 from you and I need to replace the rubber gasket ring now. Please let me know which gasket ring to purchase as there are many different ones listed for Silvia on your site. Thanks!
-
Q I have a Silvia around the year 2000 from you and I need to replace the rubber gasket ring now. P...... Read more answer nowAsked by on June 19, 2023 11:34 amAnswered by the admin
Sorry, we believe there is only one replacement made by Rancilio.
Hello, do you have a part that is compatible with part 20200182 that appears to be discontinued? Same question for part 36301030
-
Q Hello, do you have a part that is compatible with part 20200182 that appears to be discontinued? ...... Read more answer nowAsked by on April 6, 2023 12:18 pmAnswered by the admin
We do have an aftermarket part for 36301030. Sorry, we are no longer stocking 20200182.
I need a very basic pressure gauge to test my rancillio silvia machine for home use. Please advise!
-
Q I need a very basic pressure gauge to test my rancillio silvia machine for home use. Please advise! answer nowAsked by on March 6, 2023 11:48 amAnswered by the admin
This pressure gauge can be attached to the portafilter after the spout is removed.
My new Rancilio Silvia M is spitting out (bleeding) too much water with the steam. I realize that when one begins to steam that one must wait until the water stream turns into steam; however, I can never get pure steam. It takes several minutes to get enough steam to froth, but it's still too 'wet'. I have watched many times your video, "Introduction: 2020 Rancilio Silvia Espresso Machine with Rocky Doser Espresso Grinder" and try to follow your instructions. What could be the problem? Is my machine defective? Thank you for your kind consideration!
-
Q My new Rancilio Silvia M is spitting out (bleeding) too much water with the steam. I realize that...... Read more answer nowAsked by on February 27, 2023 3:32 pmAnswered by the admin Sorry, we are unsure. If you purchased from us, please use the contact us form on our web site. If you purchased elsewhere, it is best to contact your selling dealer.
I am looking for a replacement dispersion screen and screw for my Rancilio espresso maker, as well as a single shot (small) stainless filter. I think I purchased it from you in 2006 or 07. It's the miss silvia model.
-
Q I am looking for a replacement dispersion screen and screw for my Rancilio espresso maker, as wel...... Read more answer nowAsked by on August 3, 2022 3:04 pmAnswered by the admin
The screws have changed over the years. Here is our current recommendation.
I have a Silvia V3. The little plastic covers that cover the spade connectors on the power switch are crumbling apart. Where do I get new ones.?
-
Q I have a Silvia V3. The little plastic covers that cover the spade connectors on the power switch...... Read more answer nowAsked by on August 1, 2022 11:53 amAnswered by the admin
We suggest contacting your local electrical supply house.
Do you have a wiring harness for a 062014 rancilio silvia.
-
Q Do you have a wiring harness for a 062014 rancilio silvia. answer nowAsked by on August 1, 2022 11:12 amAnswered by the admin
Sorry, we do not stock this item. Please contact Rancilio directly as they are usually the only ones to stock these types of parts.
Has the rust problem under the drip tree been solved now?
-
Q Has the rust problem under the drip tree been solved now? answer nowAsked by on January 26, 2022 6:36 pmAnswered by the admin
Most likely, the answer is yes because Rancilio has moved to a stainless frame with black enamel paint.
I have a Rancilio Sylvia which I purchased from you around 1998. I have replaced many parts over the years, but now I have a new problem: After I stop pulling a shot, the valve doesn't close and water continues to run through for sometimes a minute or two or three. How do I fix this?
-
Q I have a Rancilio Sylvia which I purchased from you around 1998. I have replaced many parts over ...... Read more answer nowAsked by on January 25, 2022 1:36 pmAnswered by the admin
We are sorry, but a 1998 machine has most likely met its useful life.
I would like to install an external pressure gauge for my Rancilio Sylvia, to be connected to its ulka pump. Do you recommend a particular gauge for this application? I think that Lelit mc143 pump should work and I would like to verify that the pump comes with the capillary tube and connector that is shown in the picture. Also, do you sell a tee connector that would work with the pump? Thank you!
-
Q I would like to install an external pressure gauge for my Rancilio Sylvia, to be connected to its...... Read more answer nowAsked by on January 3, 2022 11:58 amAnswered by the admin We are very sorry, but we do not get involved in crossing over parts from different manufacturers as the outcome is not usually as desired. And, please note that we are not a trial and error parts company. Hence, our terms and conditions clearly state that parts are not returnable and non-refundable purchases as we can not resell a used part. In addition, we do not have a T connector for this scenario. Again, we are very sorry that we do not get involved.
Hi! I have a Silvia. I think it's a v3 - it was purchased from 1st-line on or before 2018. I descale on a regular basis using Durgol descaling liquid. I turned on my Siliva yesterday morning and it heated up as expected. When I went to froth my milk (I do this before pulling my shots per the Siliva manual), the frothing pressure seems low. When I pulled my shot, I had the same issue. The same grind normally produces a great crema but instead, the shot was dark with only a slight hint of creama on the outside edges of the cup. I've tried back flushing (similar to the recommendation on this page for the person with the OPV issue) and I was unable to resolve the situation. Does any of this ring a bell as to what the cause might be? I'll happily bring it in (quick drive to your location) for a repair review, etc if needed but had hoped to fix it myself if possible. Please let me know!
-
Q Hi! I have a Silvia. I think it's a v3 - it was purchased from 1st-line on or before 2018. I desc...... Read more answer nowAsked by on June 18, 2021 3:35 pmAnswered by the admin
Please check the steam tip to make sure it is clear. Otherwise, we would need to inspect the heating element.
Hi Java Jim! If you remember,I bought a rancilio silvia back in late fall (I think October or November but can't remember at the moment). Recently I've noticed a knocking noise when the pump is under pressure (when I'm pulling a shot). If I just preheat or flush, I do not get that noise.
Is this something to be concerned about?
-
Q Hi Java Jim! If you remember,I bought a rancilio silvia back in late fall (I think October or Nov...... Read more answer nowAsked by on May 5, 2021 12:30 pmAnswered by the admin
Rancilio said this was the OPV operating correctly.
My Silvia V2 doesn't have a cover like this -- instead it has a strong metal one which simply wraps around the group instead of being screwed on from the top. I'd like to replace the one mine has with the black plastic one. But since my machine doesn't use this type of cover, I don't have the screws for it. Do you know what type of screws the black plastic one uses -- and do you sell them? I looked in the parts diagrams but, like the Group Cover Bracket, the screws are illustrated but are not given a parts number!
-
Q My Silvia V2 doesn't have a cover like this -- instead it has a strong metal one which simply wra...... Read more answer nowAsked by on April 19, 2021 12:19 pmAnswered by the admin Sorry, we are usnure, too. It is best to contact Rancilio to even see if the new cover fits.
I recently bought this and the Rancilio Rocky Doserless grinder. I saw in one video that this machine can be a little fussy and was curious if you all could recommend a grind number that works best for it.
-
Q I recently bought this and the Rancilio Rocky Doserless grinder. I saw in one video that this mac...... Read more answer nowAsked by on March 31, 2021 11:26 amAnswered by the admin
Sorry, every coffee bean blend is different and requires a different number. To make matters worse, a setting 10 on one Rocky does not equate to the same grind fineness on a setting 10 on another Rocky grinder.
Thank you for your reply and advice. Does 1st line have the solenoid for this model V1/2 n stock?
-
Q Thank you for your reply and advice. Does 1st line have the solenoid for this model V1/2 n stock? answer nowAsked by on March 4, 2021 7:24 pmAnswered by the admin
Please refer to the diagrams on our web site and search by part number on our web site for pricing and availability.
Hi! I have a Silvia V2 I purchased from 1st line a number of years ago, and frequently buy parts from the firm to keep it in great shape. Here's the current problem. When in the brew cycle, water, lots of it, comes out to the solenoid drain quickly filling the pan. this just happened today for the first time. Very little coffee comes out of the group head. The question is this: Is this indicative of a need to replace the solenoid? Or, is it or could it be another problem? If another problem, any ideas? Solutions and recommended parts? Thanks for your help and expert advice!!
-
Q Hi! I have a Silvia V2 I purchased from 1st line a number of years ago, and frequently buy parts ...... Read more answer nowAsked by on March 3, 2021 4:54 pmAnswered by the admin
We suggest backflushing the unit as particles usually hold this valve open. Otherwise, a new valve is needed.
Hi! I just replaced my steam wand from Ist line. I was leaking, so - I overtightened it and now need the brass part the wand connects to. Please verify the part number for ordering and the best price. Thanks. Early model 2000s
-
Q Hi! I just replaced my steam wand from Ist line. I was leaking, so - I overtightened it and now n...... Read more answer nowAsked by on February 16, 2021 5:40 pmAnswered by the admin
Unfortunately, there is more than one version for this machine. Please email us a picture of the part.
I have a Rancilio Silvia with the Dual PID XMT7100 and it is no longer heating. The element posts show 16.8 ohms of resistance, steam and safety thermostats show continuity. The top PID has a small red light showing that it is signaling for it to heat but the orange light does not come on. Is it the SSR? Only one of the 2 SSR have the red indicator light on. What could be the problem? Thank you.
-
Q I have a Rancilio Silvia with the Dual PID XMT7100 and it is no longer heating. The element posts...... Read more answer nowAsked by on November 23, 2020 8:04 pmAnswered by the admin
Sorry, we do not get involved with customization that were performed at other dealers or shops. Since we do not perform any PID customization on the Rancilio Silvia, we strongly recommend you contact the dealer you purchased the parts from or the dealer you purchased the customized Silvia from. They would be the best place to determine if the customized parts are the issue.
Hello will 1st-Line 2 Cup Pressurized Professional Filter Basket 58mm fit RAncilio Silvia portafilter?
-
Q Hello will 1st-Line 2 Cup Pressurized Professional Filter Basket 58mm fit RAncilio Silvia portafi...... Read more answer nowAsked by on May 27, 2020 3:49 pmAnswered by the admin
Last we checked, it did.
I am struggling to get the solenoid valve off. You mention go right to left to get the large nut off. It is not budging
-
Q I am struggling to get the solenoid valve off. You mention go right to left to get the large nut ...... Read more answer nowAsked by on May 13, 2020 7:42 pmAnswered by the admin
If you are unable to perform the repair, you may want to hire a professional. No one ever said repairs are easy. In fact, repairs are difficult.
Can I use a La Marzocco 58mm filter basket in the Silvia to make stronger shots?
-
Q Can I use a La Marzocco 58mm filter basket in the Silvia to make stronger shots? answer nowAsked by on May 12, 2020 4:34 pmAnswered by the admin
Yes.
steam not working. Need part to fix.
-
Answered by the admin
This can be a short created by lack of water in the internal boiler. A full water reservoir does not mean the internal boiler is filled. We have a video about this.
Please read our article on not heating.
I am interested in obtaining a part for my Rancilio Miss Silvia that is identified on your parts diagram, but does not appear on your parts listings. The part is identified as a "Space Group" part number 20200181. It is identified as #35 on the exploded diagrams for Rancilio Miss Silvia on your website.
-
Q I am interested in obtaining a part for my Rancilio Miss Silvia that is identified on your parts ...... Read more answer nowAsked by on February 6, 2020 5:33 pmAnswered by the admin
Sorry, we do not stock this part as it barely ever gets replaced. It is usually cleaned. Also, the part number has changed to 20-200-182.
what size temper for rancilio m v5
-
Answered by the admin
If looking to upgrade the included tamper, the Rancilio Silvia espresso machine needs 58mm.
I bought a Silvia from 1st-Line in March 2002 (F.n. 60020xxx). It needs a repair now: The steam knob spins and doesn't close. Water discharges from the steam wand when the machine is pumping for espresso. The machine can't be used therefore. Including shipping the machine to you and back to me (I am in the Washington, DC area), is it worth repairing? What is the range of how much would the repair be? Thanks, George
-
Q I bought a Silvia from 1st-Line in March 2002 (F.n. 60020xxx). It needs a repair now: The steam k...... Read more answer nowAsked by on November 25, 2019 7:13 pmAnswered by the admin
It could be a bad knob and optional spring. The newer style knobs may not fit older machines. The steam valve may also need a rebuild or replacement. This repair is more difficult to perform. We are sorry that we can not offer a repair estimate without evaluating the machine.
do you have for sale a replacement frame part #10880150 for a Rancilo Silvia, and if so, how can I buy it?
-
Q do you have for sale a replacement frame part #10880150 for a Rancilo Silvia, and if so, how can ...... Read more answer nowAsked by on October 24, 2019 8:22 pmAnswered by the admin
Hi,
Here is a link to the part: 10880150.
Currently out of the stock. Please add your email to the waiting list.
My Silvia, bought from you and manufactured in late 2007, continues to make expresso (slower than before) but will not produce hot water or steam for frothing. It has a pretty new pump which is slow to get suction and start pumping when pulling a shot. There are bubbles coming our of the overflow tube during the temperature maintenance part of the cycle. I'm guessing the problem lies with the 3-way solenoid but before I remove it for cleaning or replacing I thought I'd ask you what you think the problem is. I'm otherwise a happy Silvia owner and am pleased with the parts and service you've provided in he past. I hope you can help me now.
-
Q My Silvia, bought from you and manufactured in late 2007, continues to make expresso (slower than...... Read more answer nowAsked by on April 29, 2019 3:11 pmAnswered by the admin
It could be a faulty overpressure valve that is not sealing.Put the blind filter in the portafilter which is to be inserted into the grouphead. Put descaler in the reservoir after removing any filters or softeners in the reservoir. Depress the coffee switch for 30 seconds on and 1 minute off. Repeat 5 times after a 2 minute rest each time. Check for flow. Repeat process after rinsing with reservoir and filling with water only. Test if problem goes away. If not, a new OPV may be needed.
Or, it can also be a bad heating element. Plug the machine into a GFI outlet and see if the GFI trips the power. There are multiple versions of this heating element. It is strongly advisable to check the one on your machine before ordering. Most older machines need to be replaced with this one. Really old ones use this one.
Looking down on my espresso machine from its front, after taking off the top plate, I can see two thermostats on top of the boiler. I measured the temperature at the machine's grouphead, and it is about 180 to 185F. According to literature, the ideal temperature for extracting espresso is 190 to 196F. Which of the two thermostat on the top of the boiler would I change to attain the optimal brewing temperature: the one on my left or the one on my right? Do you stock a 190F thermostat for this machine?
-
Q Looking down on my espresso machine from its front, after taking off the top plate, I can see two...... Read more answer nowAsked by on March 8, 2019 5:44 pmAnswered by the admin
Please note that temperature measurement is a science. By the time the temperature reaches from the heating through the water through the brass wall to the thermostat, the water can be hotter than what you are measuring.
Therefore, we ask to not change the thermostats as you may cause damage from making the water create more pressure and leak through the OPV which would burn up/damage the heating element.
I removed and replaced the boiler on my Silvia V3 and now when applying power it blows fuses. To further troubleshoot the issue I removed the leads to the boiler and all is fine. My guess is the boiler overheated and possibly shorted out one of the thermo-couplers. Any insight?
-
Q I removed and replaced the boiler on my Silvia V3 and now when applying power it blows fuses. To ...... Read more answer nowAsked by on February 18, 2018 12:23 pmAnswered by the admin
When this occurs, there is usually a short circuit in the heating element. The heating element posts need to be tested with a multimeter or continuity tester to check if the heating element circuit is closed or open. If one is not familiar with the use of a multimeter or continuity tester, we suggest that the machine be evaluated by a professional as electrocution, damages or personal injuries can occur.
1st-line Equipment will not assume, nor be responsible for any risks, personal injury or any/all damages that may result from a person testing or repairing equipment for defects or faults.
A I also have the issue of my machine blowing fuses. Can you suggest a reliable technician near or in the 66224 zip code?
19 reviews for Rancilio Silvia M Espresso Machine