Lelit PL62X Mara Parts Diagrams

Please use the parts diagrams provided below to determine the part(s) you need. Then use our search box above to find the part(s) on our website.
Note: These parts diagrams are provided by the manufacturers. We list them on our site for informational purposes only. We do not stock every single part listed nor can we guarantee that every part is available to order.
If uncertain, please go to the equipment model or part product page. Then use the Q&A tab found on that web page to ask your question.
Lastly, and only if the first 2 options were exhausted, please use our parts inquiry page.
Our call center does not have the training to handle parts inquiries for over 60,000 different parts items. Asking any questions regarding parts will more than likely result in you being referred to the above steps.
Please note also that all parts purchases are non-returnable or refundable and do not include technical support, instructions, or warranties as the purchase price of any part does not cover the cost of technical support. Technical support is available for repairing equipment in our shop.
Sorry, we will only special order a part for a model we carry AND was purchased through our supply chain.
Since we are unaware of the mechanical, electrical, and/or plumbing expertise of a parts buyer or the tools owned by a parts buyer, we are never able to advise if a self-repair can be performed.

Exploded Parts Diagram of the Lelit PL62X Mara espresso machine showing individual metal and plastic components, each labeled with part numbers and arranged in assembly order for clarity.

SKU
1100038
1100041
1400183
1400186
1400187
1400198
1400199
2200082
8600018
9200014
9500039
CD376
MC268

TABLE 2 (Cod 5430002 – REV00)

Technical assembly diagram showing various labeled components, including valves, sensors, and gaskets, with arrows indicating installation points on a cylindrical tank. Safety and sealant usage notes are also included. © 2025 1st-line.com

SKU
2000020
8300008
8700012
9100044
9600088
9600092
9600105
9700040
9700050
9700052
CD024-442
GV025-20
MC032
MC919
4000038
4000029
4000039

ATTENTION! As indicated in the diagram, the heating element must be screwed in at 100 Nm. Be sure you have the correct equipment to assemble the part before you buy it.

TABLE 3 (Cod 5420006 – REV00)

Exploded technical Parts Diagram showing electronic and mechanical components, connectors, and fasteners for assembly code 3000048 of the Lelit PL62X Mara, with part numbers and labels. Inset displays close-ups of select parts on a transparent frame.

SKU
1600028
3000048
3700028
3700029
9600028
9600052
9600080
9600096
AST114
AST128
CD349C
MC786

ATTENTION! As indicated in the parts diagram, the code 3700029 must be screw at 1,2 Nm!

TABLE 4 (Cod 5440005-A – REV00)

Exploded technical Parts Diagram of a metal frame assembly for the Lelit PL62X with labeled copper pipes, connectors, and fittings. A small inset shows grease application on a Mara pipe spindle. Each component is numbered for reference.

SKU
2100029
2100030
2100031
2100032
2100033
2100034
2200110
3700021
3700086
8600010
9700023
MC043
MC101

TABLE 5 (Cod 5440005-B – REV01)

Technical diagram showing an exploded view of a Lelit PL62X Mara faucet handle assembly, with labeled parts and codes, and red circles indicating where to apply Molykote G-1502 grease on specific components.

SKU
1000007
1000008
1300001
2200100
8700006
9700010
2200011
4000030

ATTENTION! The components enclosed in brackets are part of a reset kit for wand (code 4000030). They cannot be ordered individually like the other components, but you must buy the entire kit (part1 + part2 + part3 + part4). 1 kit contains the spare parts for 1 wand reset.

TABLE 6 (Cod 5440005-C – REV00)

Exploded technical parts diagram of the Mara Lelit PL62X faucet assembly, showing all internal components labeled with part numbers; red circles indicate where to apply G-1502 lubricant. Grease tube is shown at lower right.

SKU
1300000
1300002
1300003
2200054
2200090
2200091
2200092
2200095
2200106
3700005
8700000
8700007
8700015
8700017
8700028
8700040
9100000
9700000
GV654
MC918
MC927
MC930-2
MC930-3
MC930-4
4000032
4000033

ATTENTION! The components enclosed in brackets are part of a reset kit for E61 (code 4000032). They cannot be ordered individually like the other components, but you must buy the entire kit (part1 + part2 + part3 + part4 + part5).

TABLE 7 (Cod 5450002 – REV00)

Black and white technical drawing of an electric motor with visible wiring, connectors, and a labeled section marked SOFT START on a control box at the front. The motor housing and mounting brackets are also shown. © 2025 1st-line.com

SKU

4000040

TABLE 8 (Cod 5440009 – REV00)

Technical parts diagram for Mara valve assembly (Lelit PL62X), showing multiple views and components, labeled with part numbers, connector points highlighted by circles, plus assembly codes and instructions for sealant and tube length.

SKU

9700045

9700062

MC117-220

MC931

4000041

NB: Please pay attention to the numbers (1 and 2) marked on the body of the solenoid valves, and reassemble the valves following the direction indicated in the image.

ATTENTION! Holding the solenoid valves and the metal fittings in place during the assembly is a difficult operation for which special equipment and sealants are used. The fittings also have both conical and cylindrical threads. We recommend the purchase of the entire assembly code 4000041.

TABLE 9 (Cod 5420007 – REV00)