SOLD IN STORE PICKUP ONLY – Bezzera Strega V2 Tank Espresso Machine
Request a Price Match
Lower Price Form
Please note we can only price match products that are exact, in stock at the competitor provided, not sold by marketplaces, and retailers physically located within the U.S.A. 1st-line does reserve the right to refuse to price match.
$0.00
This product has been sold.
This product is already in your quote request list.
SKU: rrSTRESAL1IL2
Categories: Bezzera Espresso Machines & Espresso Machine Parts, Coupon Excluded, In Store Pickup Specials, Shop All Espresso Machines
Tags: Heat Exchange (HX) Espresso Machines, Manual (Lever) Espresso Machines
Bezzera Strega V2 Tank Espresso Machine
Features:
- Water tank only: This machine can be operated with the built in reservoir only.
- Vibration pump: Activated to refill boiler or when lever is brought into down, locked position for pre-infusion.
- Pressurstat to monitor boiler’s steam pressure
- The grouphead is heated by a separate heating element to keep the temperature more stable.
- There are weights placed in the lower rear of the machine’s interior to keep it more stable while pulling it down on the lever.
- Hot water wand on right side uses joystick controls.
- Steam wand on left side is multi-directional and utilizes non-compression valve with a joystick control.
- Boiler pressure gauge indicates steam pressure in boiler.
Espresso Machine Warning:
[ls_content_block id=”63004″]- Backflushing: Bezzera forbids backflushing the Strega as there is no 3 way solenoid valve for the water pressure to be relieved. If you backflush this machine at your risk, you may have a difficult time removing the portafilter, or the portafilter, upon removing, may explode off the grouphead and cause damage or injury. The proper way to clean the grouphead is by manually removing the dispersion screen and scrubbing it with a small wire metal brush and soaking it in Ascaso backflushing detergent. The screen can be damaged upon removal and is not covered under warranty.
- Before shipping: We open every Bezzera box to inspect the machine and add additional packaging inside the box for safer transport. We then place the Bezzera box into a larger box.
- Some assembly required: The lever handle needs to be hand screwed on and the Allen key screw needs to tighten into the hole to hold the lever handle in place. Last we checked, the Allen key and Allen key screw are included in a small bag in the accessories box.
| Brand | Bezzera |
|---|---|
| Height (inches) | 28, approximate |
| Width (inches) | 13, approximate |
| Depth (inches) | 18, approximate |
| Weight (pounds) | 69 |
| Wattage (watts) | 1550 |
| Voltage (volts) | 110 |
| Boiler capacity (liters) | 2 |
| Portafilter size (mm) | 58 |
| Tank capacity (liters) | 4 |
| Country of manufacture | Milan, Italy |
| Grinding Adjustment | N/A |
Leave your review
Rating
Publish review
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
Is the damage only on one corner of the frame as per the picture or the whole frame got damaged all sides?
-
Q Is the damage only on one corner of the frame as per the picture or the whole frame got damaged a...... Read more answer nowAsked by Toufic on April 21, 2020 7:50 pmAnswered by the admin
Multiple spots which have been repaired as best as possible.
Can I buy this now and pick it up when the restrictions are lifted?
-
Q Can I buy this now and pick it up when the restrictions are lifted? answer nowAsked by Tim Reudelhuber on March 28, 2020 2:42 pmAnswered by the admin
Sorry, we need to swipe the credit card upon pick up. Hence, the state restrictions need to be lifted.
Would you consider mailing it to CA?
-
Answered by the admin
Sorry, we do not have all the package for safe transport, and the price was discounted also due to that we do not pay for shipping costs.
This is why the product description states IN STORE PICKUP ONLY.
