*SOLD* Quamar M80E V1 Electronic Stepped Doserless Espresso Coffee Grinder (USED)

Quamar M80E V1 Electronic Stepped Doserless Espresso Coffee Grinder

Grinding adjustment

• Stepped – Adjustment dial is located underneath the hopper. The entire dial is numbered so you can remember your current grind setting easier. Turn clockwise for a coarser grind and counterclockwise for a finer grind.
• Setting lock – A setting lock button keeps your current setting. Prevents users from accidentally altering it and spending time to find your correct setting again.

Grinding burrs

• Flat burrs – Very large size at 63 mm. The larger the size, the more of a grinding surface, resulting in faster production.
• High rpm – Faster spinning rate at 1600 rpm. The higher the speed, the faster the production, which can increase efficiency and reduce wait times.
• Easy access – Remove the bean hopper. Turn the grinding adjust to the coarser direction until the top assembly comes off. This will give you access to the burrs and the grinding chamber. The burrs themselves are held in with Allen key screws.

Bean hopper

• Set screw – Secures the hopper to the grinder. Serves as a reminder for users from quickly removing a hopper full of beans.
• Fingerguard – Prevents users from “accidentally” putting their fingers in the grinding burrs.
• Stopper – A door near the bottom of the hopper can be pushed in to close the opening. This allows you to remove the hopper with beans inside so you can easily change the beans. There will be some beans already in the burr chamber which you must grind out first before removing the hopper.

Portafilter fork

• Ease of use – Allows your portafilter to sit while grinding. There is no need to hold it with your hand. Accommodates most portafilters. The clearance from the fork to the funnel is approximately 2.625″.
• Removable – The fork can be removed if you wish to grind into a container. There are 2 Phillips screws that hold the fork in place. The clearance from the funnel is approximately 5″.