Macap CPS Dynamometric Tamper
The MACAP CPS (Constant Pressure System) automatic espresso tamper is an innovation for streamlining espresso production. It helps conform all users to utilize the same tamp pressure. Using a lever, this tamper applies uniform and level pressure to the ground espresso in a group handle. The result is a predictable and consistent extraction; a leap forward in simplifying traditional espresso preparation.
- Constant dynamic pressure: 55 pounds (25 kilograms)per manufacturer spec’s.
- Tamper diameter plates: (1) 51 mm, (1) 57.5 mm.
Notes:
- The Macap CPS Twist cannot tamp in rapid succession. For double (or triple) tamping in succession in the same portafilter, you need raise the handle to the top position before re-tamping.
- This tamper may arrive with a little excess grease around the mechanism or surrounding portion of the bag. You can use a dry cloth to to clean off any excess. This will not have any impact on the operation of the grinder.
- The tamping pressure is adjustable, but Macap does not provide instructions. In addition, there is no way to determine the exact pressure to adjust to.
- Concept Art bases can screw onto this tamper. It leaves a gap but it is a secure fit.
For more Macap equipment, please visit our Macap brands page. If you have any questions, please reference the Q&A tab on each product page.
| Brand | Macap |
|---|---|
| Height (inches) | 16, approximate |
| Width (inches) | 6.5, approximate |
| Depth (inches) | 8.5, approximate |
| Weight (pounds) | 9 |
| Country of manufacture | Venice, Italy |
| Approvals | CE |
Be the first to review “Macap CPS Dynamometric Tamper” Cancel reply
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
Am i able to change the lever to the other side as I am left-handed?
-
Q Am i able to change the lever to the other side as I am left-handed? answer nowAsked by Evan Moore on March 20, 2023 1:34 pmAnswered by the admin
We are very sorry as we do not see this as possible at this time.
Do you sell a 53mm tamping base to fit the Tamper? To fit Breville 54mm puq.
-
Q Do you sell a 53mm tamping base to fit the Tamper? To fit Breville 54mm puq. answer nowAsked by Betty Martin on October 28, 2022 12:56 pmAnswered by the admin
We are very sorry that we do not sell a 53mm tamping base for this tabletop tamper.
I recently purchased a Macap CPS Dynamometric Tamper from you.
I'm very happy with it. My shots are more consistent and it's a load
off of my shoulder. I noticed that after a couple of weeks use (at home)
it's slower returning to its pre-press position. That is, when the downward
force reaches the set threshold, there's a "click" and it doesn't press as hard.
After retracting it, it now takes 4 or 5 seconds for it to reset. When it was
fresh out of the box, it was less than a second. Is that normal? Should I
apply some machine oil to it? If so, how and where? I didn't see anything
about this in the manufacturers manual.
-
Q I recently purchased a Macap CPS Dynamometric Tamper from you. I'm very happy with it. My shots a...... Read more answer nowAsked by Owen on May 25, 2021 5:53 pmAnswered by the admin
You may be getting some ground coffee in the shaft area. WD40 or a little machine oil hopefully clears things up. Make sure to not get these products into the ground coffee as they are not health safe.
Do you sell the 58 mm tamper plate for the macap cps dynamometric tamper?
-
Q Do you sell the 58 mm tamper plate for the macap cps dynamometric tamper? answer nowAsked by Eduardo on January 29, 2021 7:22 pmAnswered by the admin
Sorry, we do not.
I'd like to be able to fit this in a spot with 17" of vertical space. Does the unit's height include the handle in its upwards position?
-
Q I'd like to be able to fit this in a spot with 17" of vertical space. Does the unit's height incl...... Read more answer nowAsked by Gabe on May 2, 2020 8:32 pmAnswered by the admin We have measured about 16.25 to 16.5 inches to the top of the handle in the vertical position.
Is there a convex 58 mm tamper
-
Q Is there a convex 58 mm tamper answer nowAsked by Romualdo Macasaet Jr on October 8, 2019 11:49 pmAnswered by the admin
Sorry, there is no convex tamper available for this unit.
Will this work with a 58mm portafilter size?
-
Answered by the admin
Yes, but there can still be a little space on the sides as it depends upon the basket.
So I'm assuming with the provided 57.5 mm tamper plate, it will work with a 58mm portafilter...?
-
Q So I'm assuming with the provided 57.5 mm tamper plate, it will work with a 58mm portafilter...? answer nowAsked by Ed Place on July 16, 2019 2:11 pmAnswered by the admin
Yes. It was made at 57.5 for those who have filter baskets that slope inward as the tamper gets pushed downward.
I purchased a Macap CPS Dynamometric Tamper (CPS) from you and I need the following part.
C0001CPS042 or C0001CPS042A
-
Q I purchased a Macap CPS Dynamometric Tamper (CPS) from you and I need the following part. C0001C...... Read more answer nowAsked by DC Senn on June 25, 2019 6:32 pmAnswered by the admin Sorry, these would be special order.
Hi, What's the size of the tamper of the Macap CPS dynamometric tamper. Is it 53mm, 57.5mm or 58mm. I wish you specify this on the description so that it's readily available. Thank you.
-
Q Hi, What's the size of the tamper of the Macap CPS dynamometric tamper. Is it 53mm, 57.5mm or 58m...... Read more answer nowAsked by Araceli on June 10, 2019 7:58 pmAnswered by the admin Please note the following was shown on the page: Tamper diameter plates: (1) 51 mm, (1) 57.5 mm
How do I get into the top portion of the tamper to inspect the spring that keeps the lever upright?
I'm assuming that I need to remove the screw (C0004CPS041) to get in there, correct? If so do you have any advise on doing this? The flat head screw is really tight and I feel like i'm going to strip the slot if I keep trying to loosen it.
-
Q How do I get into the top portion of the tamper to inspect the spring that keeps the lever uprigh...... Read more answer nowAsked by Eugene on April 16, 2019 4:17 pmAnswered by the admin
We suggest you review the diagram to learn how to take the piston apart. It is not easy to take apart and put back to together. Yes, the screw can strip.
Hello, my Macap just recently stopped springing back up when I tamped my expresso grinds. It's about 4 years old now. We checked the manual on how to solve the problem, but nothing worked. Any suggestion on how to fix it? Thank you.
-
Q Hello, my Macap just recently stopped springing back up when I tamped my expresso grinds. It's ab...... Read more answer nowAsked by Shaelyn Lindley on April 5, 2019 4:48 pmAnswered by the admin
It could be a bad spring or other failed component. The tamper would need to be taken apart and evaluated to determine which part has worn or failed. Part numbers can be determined using the diagram, and then searching for the part number on our web site.
How do you adjust the pressure.What is the procedure no instructions came with my unit.
-
Q How do you adjust the pressure.What is the procedure no instructions came with my unit. answer nowAsked by Reggie on November 27, 2018 7:27 pmAnswered by the admin
Sorry, Macap does not recommend adjusting the pressure, and this is why there is no indication of the manual to adjust it. The pressure is certified by Illy Caffe as the unit was originally designed for them.
Hi firslineEq.I am interest of buying Macap CPS tamper.My questions is ,is the 55 pounds the maximum tamping presure and what is the minimum if its spring mechanism.And are you going to have it soon
-
Q Hi firslineEq.I am interest of buying Macap CPS tamper.My questions is ,is the 55 pounds the maxi...... Read more answer nowAsked by Tonko on November 29, 2017 2:30 pmAnswered by the admin Yes, 55 pounds is the maximum. This design was actually requested by Illy when this tamper was being developed. These do sell out quickly.
Reviews
There are no reviews yet.