Lelit PLA2200 Wood Steam/Hot Water Knob Kit – PL62 Mara models
Upgrade the regular knobs on your Lelit Mara to wood.
Includes:
- 4100002 – Wood Steam/Hot Water Knob (x2)
- 2200011 – Outer Washer (x2)
- 9400001 – C-Clip (x2)
- 9300011 – Washer (x2)
- 2200013CR – Cover (x2)
- 4100001 – E61 Grouphead Lever Handle
PDCKT01WLW0ZXX1
| Brand | Lelit |
|---|
Lelit PLA2200 Wood Steam/Hot Water Knob Kit – PL62 Mara models

Bill Knudson (verified owner) –
Did not give 5 stars because there were a few issues. 1. The first is the instructions are not accurate. The instructions show two washers that are not included. 2. Also if you install the brass bushing as shown in the instructions, you will not be able to turn either dial much. Forget the washer, install the bushing the backwards from the instructions. This will be the same orientation of the brass bushings as the Mara X was with the plastic dials. 3. One of the wooden dials was not bored out enough for the brass bushing/sleeve to go in, or for the steel cover/cap to go in. I had to sand the hole open to match the other wheel. For what Lelit charges there should be better quality control.
One other point: the steel cover/caps that go into the wooden dials are almost the same, but not quite, as the covers that came with the plastic wheels. Use the new ones provided with the wooden dial, those are the same diameter with slightly less depth. The new steel cover/caps will fit better. The C clips included in the kit are the same as the originals. The brass bushings are the same as the original Mara X. Keep the spares!