DISCONTINUED – Lelit MC047 Rubber Portafilter / Grouphead Gasket – PL41 / Anna
This product has been discontinued at 1st-line Equipment.
Please visit one of the links below for more comparable products.
Please visit one of the links below for more comparable products.
Please see SKU MC047Sil.
This product is already in your quote request list.
Lelit MC047 Rubber Portafilter / Grouphead Gasket – PL41 / Anna models
At the time of this writing, there are 2 versions of this portafilter gasket. The MC047 is black and made of rubber. This was the original portafilter / grouphead gasket of the PL41 models.
The MC047Sil is clear and made of silicone. This is the current gasket that Lelit uses in their production of the PL41 models. This gasket creates a more superior seal than the MC047.
This gasket will fit all versions of the PL41 Anna models. This includes: PL41, PL41QE, PL41TQE, PL41TEM.
Please also note the SKU is not MCo47. The “0” in the SKU is a zero, not the letter O.
[ls_content_block id=”24679″]| Brand | Lelit |
|---|---|
| Portafilter size (mm) | 57 |
Leave your review
Rating
Publish review
Submit Questions for FAQ
Please review the FAQ to confirm the question or topic was not previously covered.
Questions and topics can be submitted to F.A.Q.
Any followup questions for FAQ should be requested as a separate FAQ submission.
-
My L’élit machine is sériel number 507 6430 produced in 2011. I ordered a Faema E-61 grouphead gasket (F15) and it is too wide. I believe I need a gasket half this thick. This one for the Anna might work. Do you know how thick it is? Do you have it in stock.
-
Q My L’élit machine is sériel number 507 6430 produced in 2011. I ordered a Faema E-61 grouphead ga...... Read more answer nowAsked on April 11, 2019 12:25 amA MC0467 is for the Anna 57mm basket type machine.
Hello will the Lelit Pl 41( MC047Sil) or ( MC047) head gasket fit on my mokita super?
-
Q Hello will the Lelit Pl 41( MC047Sil) or ( MC047) head gasket fit on my mokita super? answer nowAsked on April 9, 2019 9:53 pmA We are very sorry that we never sold, nor repaired a Mokita Super, and based on this, we are unable to confirm a good fit. We suggest you inquire the manufacturer of your espresso maker to determine the correct part needed.
I currently have a leak in my 10 year old PL041. It's leaking where the portafilter meets the machine whenever I brew an espresso. Normally sliding the handle to the right would stop the leaking but I think the gasket is worn What is your advice?
-
Q I currently have a leak in my 10 year old PL041. It's leaking where the portafilter meets the mac...... Read more answer nowAsked on March 30, 2019 7:18 pmA
MC047 most likely needs to be replaced.
Whats the 3 dimensions of this gasket
-
A
Sorry, we do not measure parts. This gasket is only for the machine indicated.
