$0.00
This Lelit 57.35mm Pre-tamp Coffee Leveler PLA472A works on 57 mm portafilters like the Lelit PL41TEM Anna. It helps even out the coffee grinds in your filter basket. The black portion of the leveler sits on the rim of the portafilter so it levels the coffee perfectly. It also scrapes the excess coffee around the inside rim of the filter basket.
Also known as a tamper leveler, leveling tool, distribution tool, or pre-tamp leveler.
Previously known as PL121
The depth is adjustable by about 1/4″ by unscrewing the metal portion counterclockwise. There is a gasket that keeps the unit steady while turning. However, if you adjust too far (gasket goes beyond the black portion), the leveler will not turn properly.
Most people use this as a pre tamp and then use a regular tamper to come in with full pressure. However, if you tamp by volume, then this tool may be all you need. The max depth this leveler can extend is approximately 1/2″.
This leveler is made in Italy. The black handle portion has the Lelit logo. A perfect complement to your Lelit espresso equipment.
Note: The logo can be different than what is shown. Some may just say Lelit.
PDCLV57BLK0ZXX1
[ls_content_block id=”31432″]| Brand | Lelit |
|---|---|
| Portafilter size (mm) | 57 |
