DISCONTINUED Eureka MCI Mignon Programmable Doserless Espresso Coffee Grinder
Please visit one of the links below for more comparable products.
Check out the new Silenzio.
Eureka MCI Mignon Programmable Doserless Espresso Coffee Grinder
Features:
Stepless adjustment
Allows for precise adjustments to the grind setting. The adjustment dial is on the top left of the grinder underneath the bean hopper. When you turn the dial clockwise, it will result in a finer grind. Turning counter clockwise will result in a coarser grind.
Adjustable fork
Distance from top of fork to coffee chute is approximately 2.25″. You can move the fork down approximately 0.375″ to accommodate different size portafilters. You can also remove it completely if you are grinding into a container.
Optimally sized bean hopper
Holds approximately 8 ounces of roasted beans for plenty of espresso shots. Ergonomical design which helps keep the overall height low and not to stick out beyond the rest of the grinder. A set screw holds the hopper in place. Other grinders have their hopper just sit on the top which is not secure. It is also equipped with a stopper if you want to remove the hopper with the beans in it, and a finger guard…just in case.
Easy controls
Located on the right of the grinder. The large switch turns the grinder on. The button on the lower right switches the grinder from semi-automatic (pushed out) to timer (pushed in). The knob on the lower left adjusts the amount of time the grinder will run. Turn clockwise to increase time and counter clockwise to decrease time. Pushing the pressure plate in front of the grinder underneath the coffee chute will start grinding!
- If the motor doesn’t turn on, try taking the grinder to a coarser setting.
- As with all coffee grinders, it is very important to only change grind settings when the unit is powered on and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
| Brand | Eureka |
|---|---|
| Height (inches) | 13, approximate |
| Width (inches) | 5.5, approximate |
| Depth (inches) | 6.5, approximate |
| Weight (pounds) | 11 |
| Wattage (watts) | 225 |
| Voltage (volts) | 110 – 120 |
| Burr size (mm), Type | 50, flat |
| Grinding speed (RPM) | 1600 |
| Hopper capacity (grams) | 227 |
| Country of manufacture | Italy |
| Approvals | CE |
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
There are no questions yet. Be the first to ask a question about this product.
