Eureka Atom Blow Up Hopper System
$129.00 $119.00
This does not fit the Eureka Mignon XL.
Eureka Atom Blow Up Bean Hopper and Lid System
The Eureka Atom Blow Up System is an innovative tool from Eureka that helps deal with one of the main issues that plague all espresso coffee grinders: grind retention.
What is grind retention?
Essentially it is any grinds left inside after using your grinder. These grinds will sit, become stale, and will eventually mix with your next grind. This will overall affect your espresso shot.
All manufacturers keep grind retention in mind when designing their espresso grinders. This includes installing mechanical sweepers to help grinds push through or trying reducing the overall distance grinds have to travel. Eureka developed this Blow Up System without needing to redesign their current models.
Retention reducing / cleaning
The Eureka Atom Blow Up System consists of a low profile hopper complete with a lid, finger guard and stopper. In addition, there is a rubber fitting between the hopper and the lid. This transforms the hopper into a “plunger”. By pressing down on the lid, you create an air flow from the hopper all the way through to the coffee chute. There is no need to remove the beans out of the hopper. You can also perform this while the grinder is in operation.
[ls_content_block id=”24802″]| Brand | Eureka |
|---|---|
| Height (inches) | 5.75, approximate |
| Width (inches) | 7, approximate |
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
So does the Eureka blow up hopper add 5.75" to the 13" of the Atom 60 making it 18.75"? That's taller than the 17.75" with the original hopper?
-
Q So does the Eureka blow up hopper add 5.75" to the 13" of the Atom 60 making it 18.75"? That's ta...... Read more answer nowAsked by George E Givens Jr on February 18, 2021 7:54 pmAnswered by the admin Sorry for the delay. We pulled out an Atom 60 and the blow up hopper. The height of the Atom 60 with its original hopper is around 17.25". With the blow up hopper, the height is close to 18.5".
Does this Blow up fit the Eureka Zenith 65E or is there a version that does?
-
Q Does this Blow up fit the Eureka Zenith 65E or is there a version that does? answer nowAsked by k.metzger1980 on November 11, 2020 10:59 amAnswered by the admin
Yes, it does fit, but the screw hole on the bottom of the hopper does not perfectly align with the screw on the Zenith and Olympus models.
I already own the short Eureka Hopper, can I buy the rubber accessory ring only?
-
Q I already own the short Eureka Hopper, can I buy the rubber accessory ring only? answer nowAsked by Hady Majano on June 27, 2020 6:19 amAnswered by the admin
Sorry, this item is only available by Eureka as an assembly.
What's the outside diameter of the neck portion of this hopper?
-
Q What's the outside diameter of the neck portion of this hopper? answer nowAsked by Alex on May 6, 2020 1:59 amAnswered by the admin
At the bottom point, it is ~51.05mm and widens up to ~51.65mm. This small slope is to create a friction effect to hold the hopper in place.
Can you give the dimensions of this? want to make sure it fits under my cabinet.
-
Q Can you give the dimensions of this? want to make sure it fits under my cabinet. answer nowAsked by SMK on April 15, 2020 3:15 pmAnswered by the admin
The height from bottom of neck to top of cover (non-compressed) is approximately 5.75 inches
Does this work with the entire Atom line?
-
Answered by the admin
As far as we have seen, yes.
did this hoper can fit , eureka mignon line up ?
-
Q did this hoper can fit , eureka mignon line up ? answer nowAsked by Kdj on September 3, 2019 9:30 amAnswered by the admin
Sorry, it does not fit the neck. This is why we do not state it fits the Eureka Mignon espresso grinders, and it is always best to check the manufacturers' diagrams on our web site to see if the part number is listed for the product.
Can you use this on any grinder as an extra part or only on Eureka grinders - I didn’t know they made them.
-
Q Can you use this on any grinder as an extra part or only on Eureka grinders - I didn’t know they ...... Read more answer nowAsked by Frank Gerlak on January 29, 2019 12:07 amAnswered by the admin
Sorry, this item only works on specific Eureka grinders.
