ECM Elektronika

DISCONTINUED ECM Elektronika II Profi HX Espresso Machine

This product has been discontinued at 1st-line Equipment.
Please visit one of the links below for more comparable products.

.

SKU: ECMG84274 Categories: , , , , Tag:

ECM Elektronika II Profi HX Switchable Espresso Machine

The ECM Elektronika II Profi has the same quality features as the Technika such as an E61 grouphead and rotary vane pump. In addition, the Elektronika has a row of programmable buttons that dose out a preset amount of water. You can also connect to a direct water line so you won’t have to constantly fill a water tank.

ECMG84274-electronic-controls

Electronic controls

  • Automatic controls – There are 4 buttons that allow you to make espresso. Each of these buttons is reprogrammable to your own settings.
  • Semi-automatic control – In addition to the automatic buttons, there is also a semi-automatic dosing button.
ECMG84274-hx

Heat exchange system

  • Stainless steel, insulated – The boiler is made of stainless steel which is less susceptible to limescale. Typically stainless steel boilers do not retain their heat as well as copper or brass boilers. This machine compensates that by being wrapped with insulation.
  • Pull a shot & steam milk at the same time – Steam is always readily available. Therefore there is no wait time going from coffee to steam mode. Works well if entertaining a small group of people.
ECMG84274-gauges

Separate pressure gauges

  • Steam pressure gauge – Located on the left. Measures from 0 to 3 bar. Optimal pressure is between 0.8 and 1.1.
  • Brew pressure gauge – Located on the right. Measures from 0 to 16 bar. Optimal pressure is between 8 and 10.
ECMG84274-grouphead

E-61 grouphead

  • Constantly heated – Hot water circulates from the heat exchanger through the grouphead and back to keep the grouphead and your portafilter nice and hot. This keeps the grouphead at a constant, stable temperature compared to other groupheads that have a built-in heating element.
ECMG84274-pump

Rotary vane pump

  • Quiet operation – Rotary pumps are necessary for direct connect capable machines since vibration pumps cannot handle the incoming water pressure. The main benefit that you will experience is that they are a lot quieter.
  • Adjustable – No need to remove the body panel to access. The adjustment screw is accessible underneath the machine.
ECMG84274-switchable

Switchable from a water tank to direct water connection

  • Easy transition – After hooking up the water line (included) to your machine, all you need to do is activate a switch. The switch is behind the drip tray on the left side. Turn to the “1” position.
ECMG84274-wands

Steam & hot water wands

  • Joystick handles – Easily pull in any direction for quick activation. Both joysticks will also lock in any position for hands-free operation.
  • Multi-directional – Allows for more movement and flexibility.
  • “No burn” – Both wands are insulated to allow you to touch anywhere on the arm. However, the tip and connection are still hot. Please also note that after very long periods of steaming or pouring hot water, the arm will be too hot to touch. We recommend to only touch the rubber grips on each wand.
  • 2-hole steam tip – Allows for a slow gradual build-up of microfoam.
ECMG84274-parts2

Accessories included

  • Portafilters – Single spout portafilter and a dual spout portafilter. Both handles match the style of the grouphead lever and are ergonomically designed with an angle for easy operation to lock into the grouphead.
  • Filter baskets – 1-cup filter basket which holds approximately 7 grams. 2-cup filter basket which holds approximately 14 grams. Blind filter basket which you can use for backflushing. All baskets are 58 mm in diameter.
  • Tamper – Solid 58mm tamper. No need to upgrade.
  • Cleaning brush – Used for cleaning the grouphead. Ergonomically designed with an angle for easier usage. The neck has special ridges to keep hot water from dripping to your hand.
  • Hose – Stainless steel braided. For connecting to a water line.
  • Instruction manual – Written in both German and English.

For more ECM Manufacture products, please visit our ECM Manufacture brands page. If you have any questions, please reference the Q&A tab on each product page.

Notes

Espresso Machine Warning:

  • ELECTRICAL WARNING: To avoid electrical damage to this espresso machine which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. the lack of the recommended surge suppressor, the espresso machine can be damaged at the power switch, the electronics, the heating element, the pressurstat or the wiring inside.
  • WATER WARNING: To increase the useful life of and not damage your espresso machine, please use softened water. Softened water is water without calcium and without magnesium, but still has other minerals for espresso extraction. Do not use distilled water, purified water, nor reverse osmosis water as these types of water create oxidation with the metals and cause the same damaging effects as limescale.
  • DESCALING WARNING: We do not recommend descaling unless there is an issue with the espresso machine. The reason is that too much descaling can eat away at the metals and gaskets inside an espresso machine.
  1. E61 Flow Control: Please note that the Elektronika is not compatible with the E61 Flow Control.
Brand

ECM Manufacture
Height (inches)

16, approximate
Width (inches)

13, approximate
Depth (inches)

19, approximate
Weight (pounds)

64
Wattage (watts)

1400
Voltage (volts)

110 – 120
Tank capacity (liters)

3
Boiler capacity (liters)

2.1
Country of manufacture

Assembled in Milan, Italy, Designed in Germany
Approvals

CE

Finding your part
  • Please use the parts diagrams provided below to determine the part(s) you need. Then use our search box above to find the part(s) on our website. If no results come up, more than likely we do not stock the part.
  • If uncertain, please go to the equipment model or part product page. Then use the Q&A tab found on that web page to ask your question.
  • Lastly, and only if the first 2 options were exhausted, please use our parts inquiry page.
  • Our call center does not have the training to handle parts inquiries for over 60,000 different parts items. Asking any questions regarding parts will more than likely result in you being referred to the above steps.
  • Please note also that all parts purchases are non-returnable or refundable and do not include technical support, instructions, or warranties as the purchase price of any part does not cover the cost of technical support. Technical support is available for repairing equipment in our shop.
  • Sorry, we will only special order a part for a model we carry AND was purchased through our supply chain.
  • Since we are unaware of the mechanical, electrical, and/or plumbing expertise of a parts buyer or the tools owned by a parts buyer, we are never able to advise if a self-repair can be performed.
ECM-Elektronika-II-parts-diagram-01
# SKU
1 B7474217
2 P3011.E1
3 P2022
5 B7819911
6 P3012
7 B7826212
8 ER8285
9 P1999
10 P3010
11 P2006
12 P6100
13 P3009
14 P3008
15 P3032
16 P3031
17 P3030
18 P3023.4
19 M3024.4
20 P3001.5
21 P7025
ECM-Elektronika-II-parts-diagram-02
# SKU
1 P6014.K
2 P6016
3 P6021
4 P6014.K
o.Abb. P6025
o.Abb. P6020.NK
5 P6017.N
6 B7496076
7 P6020.N
8 P6020.3
9 P6023
10 B5471509
11 M3006.5
12 P6020.K3
13 P2021
14 P6022
15 P2019
16 P2009
17 P2006
18 P6020.K4
19 C499900769
20 C400001932
21 P8012
22 C229900519
23 P3023
24 P3527
26 P6057
27 P3528
28 P2030
29 P6058
31 P3024
32 C229900579
33 P9014
34 P3025
35 P7000.5
36 P7000.2
37 P7000.3
38 P7000.4
39 P7000.1
40 P7000
42 C229900644
43 C229900548
44 C199900275 (230V)
44 US1005 (115V)
45 P1905
47 P3026
47 US1016
54 P6103
55 C227700898
ECM-Elektronika-II-parts-diagram-03
# SKU
1 P6051
2 C229900520
3 P1904
4 P2045
5 C229900740
6 C229900393
7 P1901
8 P2040
9 P1902
10 P1900
11 C219900561
12 P2049
13 C199901550
14 C229900559
15 C199900839
19 P1903
20 C229900520
21 C229900519
22 B7400902
23 C199900294
24 C229900520
25 C229901576
26 P9013
27 P7014.1
27 US1000
28 P2010
29 C309900127
30 P7014.2
31 P6104
32 P3003.1
33 P2010
34 C309900127
35 P6102
36 P2043
37 B7432516
38 B7432517
39 P7050
ECM-Elektronika-II-parts-diagram-04
# SKU
1 P6003.11
2 P6003.10
3 P6003.7
4 P6003.9
5 C329900682
6 P6003.8
7 P6003.12
8 P6015
9 P6003.13
10 P6003.15
11 P6003.14
12 P6003.7
13 P6003.5
14 P6003.6
15 P6003.4
16 P6003.3
17 P6003.2
18 P6003.1
19 C439900840
20 P6003 (not included 8, 9, 10, 11, 19)
21 P6002
22 P6002.1
23 P6002.4 (2 hole)
23 P6002.6 (4 hole)
23 P6002.3 (5 hole)
24 P6003.KD
25 P6003.KH
26 P6001.1
27 P6002.2
28 P6002.5
29 C449900719
30 P6001
ECM-Elektronika-II-parts-diagram-05
# SKU
1 P1000.2
2 C469900420
3 C619900554
4 C229900549
5 P1000.3
6 C469900422
7 P1000.1
8 C100001891 (230V)
8 US1007 (110V)
9 P1007
10 C449900786
11 C309900127
12 P2011
13 P2010
14 C309900131
15 C449900767
16 B7817004
17 C309900164
18 C469901132
19 C449900229
20 P3545
21 P6512
22 C229901128
23 C519900103
24 P1006
ECM-Elektronika-II-parts-diagram-06
# SKU
1 P4006
2 P6106
3 P2008
4 P2022
5 P2004
6 P3005
7 P4007 (230V)
7 US1006 (110V)
8 P9114
9 B7633618
10 C199900087
11 C439900086
12 P2035 (UK)
12 P2036 (AUS)
12 P2034 (US)
12 C199900957
13 P6053.1
14 C199900270
ECM-Elektronika-II-parts-diagram-07
# SKU
1 R210
2 C639900710
4 C639900764
5 C619900104
6 89424
7 C229900562
8 C619900106
9 C619900105
10 89425
11 C229900566

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED ECM Elektronika II Profi HX Espresso Machine”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      Hi do you carry the ECM 58mm Distribution tool? https://www.ecm.de/en/products/details/product/Product/Details/distributor/ any help would be greatly appreciated. Mark
    1. 0 votes
      Q Hi do you carry the ECM 58mm Distribution tool? https://www.ecm.de/en/products/details/product/Pr...... Read more answer now
      Asked by Mark on May 31, 2022 4:35 am
      Answered by the admin

      Sorry, we do not.
      2. I have purchased ECM Electronika II profi about a year ago. In the past few weeks, the machine stopped making crema on the settings that made crema before. Also, it takes much longer for the water to start coming out from the machine. Any suggestions will be appreciated
    2. 0 votes
      Q I have purchased ECM Electronika II profi about a year ago. In the past few weeks, the machine st...... Read more answer now
      Asked by Dmitry on March 29, 2022 12:50 pm
      Answered by the admin

      Yes, try changing your grind settings when there is a change n seasons and humidity levels.
      3. A couple of weeks ago the safety thermostat started venting (slow constant release followed by a big burst, on repeat). I turned off the machine with the boiler pressure gauge reading ~1.5bar. I've since kept a close eye on it to try and reproduce the issue, which it did again but this time was venting when the gauge was reading around 0.75 bar. The boiler pressure gauge seems to be working (it slowly goes down to 0 when off, and increases to between 0.5 and 1 bar when on and working). For the days in between these events, when the safety valve didn't vent, the boiler pressure was stable (so the pressure stat seems to be working). I removed the heating element to check the inside of the boiler, there is no obvious lime scale in there (if there is, it would be quite light I think). I'm in Oakland CA, where the water is very soft, so this shouldn't be an issue. I'm quite comfortable replacing parts myself and would prefer to fix it myself (rather than incur the expense of shipping across the country twice) if possible, and hoping you can provide a little guidance for diagnosis
    3. 0 votes
      Q A couple of weeks ago the safety thermostat started venting (slow constant release followed by a ...... Read more answer now
      Asked by daniel on November 2, 2020 7:16 pm
      Answered by the admin

      Sorry to read this. Please the safety thermostat is a resettable part that does not distribute and steam or hot water. The part you are referring to is the boiler safety valve. When this opens and expends steam AND the boiler gauge reads 1.5 or more, it means the machine is overheating. Overheating is created by limescale on pressurstat or the PID sensor (depending upon version) or the pressurstat is degrading from use.

      The machine go through a descaling process. After descaling, we recommend cooling down the machine, unplugging from the wall outlet, and disconnecting any plumbing.

      The pressurstat should be replaced and the pipe holding the pressurstat should be removed and descaled separately. Reassemble and test.

       
      4. I just purchased this Elektronika II 3-weeks ago as a follow up to the Technika I purchased from you in May 2015 (2015031457). I have 2 questions re. the Technika- 1). the Caldia gauge shows 0.25 bar when the machine is not running and this is the lowest point the gauge will reach even when off for days. Does this mean it needs to be replaced? I noticed our high steam pressure is only 0.9 bar even after I adjust the Sirai switch. Compared to the new Elektronika I just received from you, I see 0 bar on the Caldia when the machine is off and 1.5 bar when steaming. Does this sound like a new gauge is needed? My 2nd question- in my 5-yr old Technika, I noticed that after the machine pressures up, part #11 (C219900561) is engaged with pressure however every 15 seconds of so a small blast of water/air releases out. My understanding is this valve should close when full pressure is reached so does this sound like the seal may have a leak and it needs to be replaced? Thanks for your feedback.
    4. 0 votes
      Q I just purchased this Elektronika II 3-weeks ago as a follow up to the Technika I purchased from ...... Read more answer now
      Asked by Paul on July 6, 2020 6:15 pm
      Answered by the admin

      It sounds like the gauge and vacuum breaker/bleeder valve need to be replaced.
      5. Do you have this parts number in stock C219900561 and P2049
    5. 0 votes
      Q Do you have this parts number in stock C219900561 and P2049 answer now
      Asked by PeterB07849 on May 14, 2019 4:21 pm
      Answered by the admin

      For availability of parts, please search our web site through the top search box at top by part number. All parts that are available are on our web site.
      6. Ok and my question is can you tell me how much that part would be
    6. 0 votes
      Q Ok and my question is can you tell me how much that part would be answer now
      Asked by Giovanni on January 7, 2019 7:48 pm
      Answered by the admin

      Sorry, we do not publish prices in Q&A as prices can change over time, and pricing is determined on manufacturer cost, exchange rates, duties, and shipping costs.
      7. I need control box # us1006. 9.5.37.13g for my ecm electronika
    7. 0 votes
      Q I need control box # us1006. 9.5.37.13g for my ecm electronika answer now
      Asked by Giovanni on January 7, 2019 5:11 pm
      Answered by the admin

      Sorry, we are currently out of stock on this item. We should have it in 4-6 weeks.
      8. Is this machine the same as the “Elektronika II Profi Switchable”? Or are there subtle differences?
    8. 0 votes
      Q Is this machine the same as the “Elektronika II Profi Switchable”? Or are there subtle difference...... Read more answer now
      Asked by stei7141 on August 19, 2018 11:15 pm
      Answered by the admin

      There are different versions of the same machine by ECM. Profi typically means a switchable model with rotary pump.
      9. I need the back flush (solid disk for the portafilter) for this machine. Do you have anything that works?
    9. 0 votes
      Q I need the back flush (solid disk for the portafilter) for this machine. Do you have anything tha...... Read more answer now
      Asked by Scott on January 19, 2018 8:24 pm
      Answered by the admin

      The following blind will work on the ECM Elektronika espresso machine.

    Jason K. from United States (US) purchased

    Lelit MC935F Quick Female Joint

    1 day, 19 hours, 53 minutes ago