E61 Grouphead Flow Control Kit
$199.00 $149.00
WARNING! Please note that we are not responsible for any damage before, during, or after installation. Damages can include, but not limited to
a) over-tightening the gauge into the grouphead (causing the gauge thread to break and threading broken inside the grouphead),
b) breaking of gaskets and o-rings,
c) scratches on mushroom,
d) over-tightening of gicleur, and/or
e) limescale build up.
We cannot guarantee this will fit every E61 grouphead.
E61 Grouphead Flow Control Device with Pressure Gauge
Installs and works on most E61 groupheads. We have installed this flow control kit on Rocket Appartamento and TCA espresso machines with E61 groupheads. Hence, we assume they work for the other Rocket models with an E61 grouphead.
| Brand | 1st-line |
|---|
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
Hello. My name is Steven. I purchased this flow control in April. I need a replacement of the larger green o-ring at the base of the unit. Do you carry these? How can I purchase?
-
Q Hello. My name is Steven. I purchased this flow control in April. I need a replacement of the lar...... Read more answer nowAsked by steven.issley on July 9, 2025 1:30 pmAnswered by the admin
Sorry, these are not sold separately by the supplier.
Will this work on a Isomac TEA machine , which uses a std. E61 group?
-
Q Will this work on a Isomac TEA machine , which uses a std. E61 group? answer nowAsked by Gerard Ferency on March 5, 2025 9:38 pmAnswered by the admin
We are very sorry that we can not confirm this as we do not have this model to test on.
Is the mushroom made of stainless? Will this work on ACS Vesuvius?
-
Q Is the mushroom made of stainless? Will this work on ACS Vesuvius? answer nowAsked by David on November 20, 2024 6:04 pmAnswered by the admin
Hello and sorry for the delay in responding to your question. We believe that the mushroom is made of a combination of plated brass (top) and stainless steel (bottom), but have not been able to confirm this with the manufacturer. While we believe it should work, this assembly has not been tested with the ACS Vesuvius.
Will this work on a Rocket E61 grouphead (like the Appartmento)?
-
Q Will this work on a Rocket E61 grouphead (like the Appartmento)? answer nowAsked by RF on November 19, 2024 8:32 pmAnswered by the admin
So far, other customers have not had issues. As stated, we can never guarantee fitment on any parts.
Hi All, hope all is well. My valve for the flow control is not behaving properly, at 8 o clock it opens up to 7 bars which gives me very very little room to play with. My setting is as follows: valve to be fully shut at 9'o clock and fully opened at 1' o clock (counter clockwise) I am beginning to thing the tension on the spring that it came with is not where it needs to be. If I were to replace the spring where would we buy the springs from ? Any thoughts please ? much appreciated!
-
Q Hi All, hope all is well. My valve for the flow control is not behaving properly, at 8 o clock it...... Read more answer nowAsked by Mir Jabbar on March 21, 2023 10:43 amAnswered by the admin
Please run a descaler through the grouphead and allow to sit overnight. The chance of a bad spring is not likely at all. Build up with interfere with the gicleur and needle portion of the valve.
A Mir, I am having the same issue. Were you able to solve the problem with the suggested fix? If not, how did you fix the issue?
Does this work with the profitec pro 700? Or would you suggest a different flow control kit ? If so which one?
-
Q Does this work with the profitec pro 700? Or would you suggest a different flow control kit ? If ...... Read more answer nowAsked by Nick on February 6, 2023 2:33 pmAnswered by the admin
You will need this flow control kit.
Will this fit the Bezzera Magica w/ PID?
-
Answered by the admin
It can, but we have not tried it for proper performance.
Just installed on my Profitect 500. The pressure gauge is t registering, but the flow control is working. Any help is allowed
-
Q Just installed on my Profitect 500. The pressure gauge is t registering, but the flow control is ...... Read more answer nowAsked by Jamie on June 23, 2022 5:07 pmAnswered by the admin
The grouphead gauge measures resistance in the portafilter. It will not register if there is no backpressure created with a portafilter. You can test with a blind filter. If still an issue with the blind filter, either that portion of the grouphead is blocked or a particle entered the gauge and blocked it.
Compatible with Bezzera Unica ?
-
Answered by the admin
We are sorry that we have not tested this on the Unica and we are unable to confirm either way at this time.
Is there any way to buy this kit without the gauge but instead buy the gauge that comes with the Lelit kit separately?
-
Q Is there any way to buy this kit without the gauge but instead buy the gauge that comes with the ...... Read more answer nowAsked by Chris on November 21, 2021 9:16 pmAnswered by the admin
Sorry, this is part of a complete kit and is sold as such as we do not ant to start breaking up kits.
I have a 2007 Vibiemme E61 espresso machine and wanted to upgrade it with a flow control. Does your device work for this machine?
-
Q I have a 2007 Vibiemme E61 espresso machine and wanted to upgrade it with a flow control. Does yo...... Read more answer nowAsked by Thomas Sipes on November 18, 2021 12:42 pmAnswered by the admin
Sorry, we will have a flow control next year for the VBM. The VBM requires a special type of flow control than can work with the special mushroom.
Will E61 Grouphead Flow Control Device work on Lelit Mara X machine?
-
Q Will E61 Grouphead Flow Control Device work on Lelit Mara X machine? answer nowAsked by vlipyanskiy on November 2, 2021 3:55 pmAnswered by the admin
Sorry, we are unsure as we only tested the Lelit branded flow control device.
Will this work on a VBM Junior HX that is about 6 years old?
-
Q Will this work on a VBM Junior HX that is about 6 years old? answer nowAsked by David Nadeau on June 28, 2021 7:19 pmAnswered by the admin
Sorry, it will not. We may have something in the future.
Will this work on the Caffeum Perfectus Minima E61 grouphead and being that the E61 for this unit has a pressure gauge would that need to be changed out also?
-
Q Will this work on the Caffeum Perfectus Minima E61 grouphead and being that the E61 for this unit...... Read more answer nowAsked by Mike on April 19, 2021 6:39 pmAnswered by the admin
It should work last we checked. The gauge on the Minima can be left on the grouphead, and the one in the kit can be kept as a spare.
Does the paddle turn 270 degree (like the Lelit Bianca which is less than 360 degree) or we have to turn more than a turn to fully open and close the flow ?
-
Q Does the paddle turn 270 degree (like the Lelit Bianca which is less than 360 degree) or we have ...... Read more answer nowAsked by Barista on March 15, 2021 6:36 pmAnswered by the admin The Bianca turns less than 180 degrees. This flow control turns more than one full revolution, but it loses control at some point in its cycle.
Will it works on a Quick Mill Vetrano 2B evo ? Do you sell spare parts if something breaks (gicleur for example) ?
Do you have a video that shows us how to install the kit ? Thanks for answering both 3 questions
-
Q Will it works on a Quick Mill Vetrano 2B evo ? Do you sell spare parts if something breaks (gicle...... Read more answer nowAsked by Benoit on March 14, 2021 6:17 pmAnswered by the admin Sorry, parts are not sold separately. Keep the machine free of scale buildup to avoid issues. Unfortunately, we can not guarantee a fitment on the Quickmill Vetrano as we do not sell Quickmill espresso machines at this point in time.
Will you offer a similar solution for VBM machines?
-
Q Will you offer a similar solution for VBM machines? answer nowAsked by Melvyn on January 28, 2021 5:37 pmAnswered by the admin
Yes, this is being worked on.
Is this compatible with the La Nuova Era Cuadra?
-
Q Is this compatible with the La Nuova Era Cuadra? answer nowAsked by ginny on December 28, 2020 3:19 pmAnswered by the admin
Most likely, it should fit and work. However, we never tested it and can not guarantee a fitment.
