E61 Grouphead Flow Control Device
E61 Grouphead Flow Control Device
E61 Grouphead Flow Control Device
E61 Grouphead Flow Control Device

E61 Grouphead Flow Control Device

$199.00

Found a better offer? Request a price match.

WARNING! Please note that we are not responsible for any damage before, during, or after installation.  Damages can include, but not limited to

a) over-tightening the gauge into the grouphead (causing the gauge thread to break and threading broken inside the grouphead),

b) breaking of gaskets and o-rings,

c) scratches on mushroom,

d) over-tightening of gicleur, and/or

e) limescale build up.

We cannot guarantee this will fit every E61 grouphead.

SKU: CS0030 Categories: , , ,
Earn 199 EspressoPoints worth $3.98! (Learn about EspressoPoints)
Earn 199 EspressoPoints worth $3.98! (Learn about EspressoPoints)

E61 Grouphead Flow Control Device with Pressure Gauge

Installs and works on most E61 groupheads.

Brand

1st-line

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “E61 Grouphead Flow Control Device”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      Hi All, hope all is well. My valve for the flow control is not behaving properly, at 8 o clock it opens up to 7 bars which gives me very very little room to play with. My setting is as follows: valve to be fully shut at 9'o clock and fully opened at 1' o clock (counter clockwise) I am beginning to thing the tension on the spring that it came with is not where it needs to be. If I were to replace the spring where would we buy the springs from ? Any thoughts please ? much appreciated!
    1. 0 votes
      Q Hi All, hope all is well. My valve for the flow control is not behaving properly, at 8 o clock it...... Read more answer now
      Asked by Mir Jabbar on March 21, 2023 10:43 am
      Answered by the admin

      Please run a descaler through the grouphead and allow to sit overnight. The chance of a bad spring is not likely at all. Build up with interfere with the gicleur and needle portion of the valve.
      2. Does this work with the profitec pro 700? Or would you suggest a different flow control kit ? If so which one?
    2. 0 votes
      Q Does this work with the profitec pro 700? Or would you suggest a different flow control kit ? If ...... Read more answer now
      Asked by Nick on February 6, 2023 2:33 pm
      Answered by the admin

      You will need this flow control kit.
      3. Will this fit the Bezzera Magica w/ PID?
    3. 0 votes
      Q Will this fit the Bezzera Magica w/ PID? answer now
      Asked by John on August 20, 2022 1:35 pm
      Answered by the admin

      It can, but we have not tried it for proper performance.
      4. Just installed on my Profitect 500. The pressure gauge is t registering, but the flow control is working. Any help is allowed
    4. 0 votes
      Q Just installed on my Profitect 500. The pressure gauge is t registering, but the flow control is ...... Read more answer now
      Asked by Jamie on June 23, 2022 5:07 pm
      Answered by the admin

      The grouphead gauge measures resistance in the portafilter. It will not register if there is no backpressure created with a portafilter. You can test with a blind filter. If still an issue with the blind filter, either that portion of the grouphead is blocked or a particle entered the gauge and blocked it.
      5. Compatible with Bezzera Unica ?
    5. 0 votes
      Q Compatible with Bezzera Unica ? answer now
      Asked by Sid on February 19, 2022 9:01 pm
      Answered by the admin

      We are sorry that we have not tested this on the Unica and we are unable to confirm either way at this time.
      6. Is there any way to buy this kit without the gauge but instead buy the gauge that comes with the Lelit kit separately?
    6. 0 votes
      Q Is there any way to buy this kit without the gauge but instead buy the gauge that comes with the ...... Read more answer now
      Asked by Chris on November 21, 2021 9:16 pm
      Answered by the admin

      Sorry, this is part of a complete kit and is sold as such as we do not ant to start breaking up kits.
      7. I have a 2007 Vibiemme E61 espresso machine and wanted to upgrade it with a flow control. Does your device work for this machine?
    7. 0 votes
      Q I have a 2007 Vibiemme E61 espresso machine and wanted to upgrade it with a flow control. Does yo...... Read more answer now
      Asked by Thomas Sipes on November 18, 2021 12:42 pm
      Answered by the admin

      Sorry, we will have a flow control next year for the VBM. The VBM requires a special type of flow control than can work with the special mushroom.
      8. Will E61 Grouphead Flow Control Device work on Lelit Mara X machine?
    8. 0 votes
      Q Will E61 Grouphead Flow Control Device work on Lelit Mara X machine? answer now
      Asked by vlipyanskiy on November 2, 2021 3:55 pm
      Answered by the admin

      Sorry, we are unsure as we only tested the Lelit branded flow control device.
      9. Will this work on a VBM Junior HX that is about 6 years old?
    9. 0 votes
      Q Will this work on a VBM Junior HX that is about 6 years old? answer now
      Asked by David Nadeau on June 28, 2021 7:19 pm
      Answered by the admin

      Sorry, it will not. We may have something in the future.
      10. Will this work on the Caffeum Perfectus Minima E61 grouphead and being that the E61 for this unit has a pressure gauge would that need to be changed out also?
    10. 0 votes
      Q Will this work on the Caffeum Perfectus Minima E61 grouphead and being that the E61 for this unit...... Read more answer now
      Asked by Mike on April 19, 2021 6:39 pm
      Answered by the admin

      It should work last we checked. The gauge on the Minima can be left on the grouphead, and the one in the kit can be kept as a spare.
      11. Does the paddle turn 270 degree (like the Lelit Bianca which is less than 360 degree) or we have to turn more than a turn to fully open and close the flow ?
    11. 0 votes
      Q Does the paddle turn 270 degree (like the Lelit Bianca which is less than 360 degree) or we have ...... Read more answer now
      Asked by Barista on March 15, 2021 6:36 pm
      Answered by the admin The Bianca turns less than 180 degrees. This flow control turns more than one full revolution, but it loses control at some point in its cycle.
      12. Will it works on a Quick Mill Vetrano 2B evo ? Do you sell spare parts if something breaks (gicleur for example) ? Do you have a video that shows us how to install the kit ? Thanks for answering both 3 questions
    12. 0 votes
      Q Will it works on a Quick Mill Vetrano 2B evo ? Do you sell spare parts if something breaks (gicle...... Read more answer now
      Asked by Benoit on March 14, 2021 6:17 pm
      Answered by the admin Sorry, parts are not sold separately. Keep the machine free of scale buildup to avoid issues. Unfortunately, we can not guarantee a fitment on the Quickmill Vetrano as we do not sell Quickmill espresso machines at this point in time.
      13. Will you offer a similar solution for VBM machines?
    13. 0 votes
      Q Will you offer a similar solution for VBM machines? answer now
      Asked by Melvyn on January 28, 2021 5:37 pm
      Answered by the admin

      Yes, this is being worked on.
      14. Is this compatible with the La Nuova Era Cuadra?
    14. 0 votes
      Q Is this compatible with the La Nuova Era Cuadra? answer now
      Asked by ginny on December 28, 2020 3:19 pm
      Answered by the admin

      Most likely, it should fit and work. However, we never tested it and can not guarantee a fitment.

    Send me a notification for each new answer.