Shipping Included on orders over $99
- Standard ground shipping within the contiguous 48 states. Alaska & Hawaii shipping costs extra.
- Total order must be over $99 after all discounts.
- For more information, please see Shipping Included.
BILT In Tank Rechargeable Water Softener / Particle Filter
Request a Price Match
BILT In Tank Rechargeable Water Softener / Particle Filter
Current price
$13.95
Lower Price Form
Please note we can only price match products that are exact, in stock at the competitor provided, not sold by marketplaces, and retailers physically located within the U.S.A. 1st-line does reserve the right to refuse to price match.
BILT In Tank Rechargeable Water Softener / Particle Filter
Current price
$13.95
$13.95
Earn EspressoPoints
- Must be logged into your online account when purchasing to accrue EspressoPoints.
- For more information, please visit EspressoPoints.
In stock
BILT In Tank Rechargeable Water Softener / Particle Filter
This is a small insurance price to pay! Softens your water so that less limescale is built up inside your espresso machine – this is very important for semi-commercial machines with heat exchangers as well as many other electric pump-driven espresso machines.
Specifications:
- Resins are rechargeable for up to 6 months – recommended to recharge at least weekly with salt , whichever is sooner. Recharge and rinse before 1st use!
- Replace the unit every 6 months to avoid mold, fungal, and/or bacteria buildup. Replace sooner if the unit does not allow water to flow through after a recharge and after confirming the electrical pump does intake water through the hose without the softener
- Can be used in most pump model espresso machines that have a water intake tube in the espresso machine’s reservoir.
- This can not be used in espresso machines with direct water/plumbed in connections or where there is a bottom feed of water from the reservoir (meaning water exits through the bottom).
- Measurements (approximate and subject to slightly change without notice): H 4 1/8″ x W 1 3/4″
- Canister Height: Approximately 2 inches and extension about 1 inch.
Notes:
- For Rancilio Silvias, the connection is loose. You can use a tie wrap to secure it to the hose.
- The resins expand after getting wet.
- Warning: Upon receipt and use, please make sure that the canister does not leak resins. Sometimes the screen breaks or moves during shipping (even after being well packed), and resins will fall out).
- Please note, due to health reasons, that water softeners are not returnable under our return policy.
-
The water softener must be inspected for damage and regenerated with salt prior to use.
- Replaces NE454 NE.454
- Replaces 7374012 Bezzera Water Softener – BZ02 & BZ07
| Brand | BILT |
|---|
Reviews with attachments
Leave your review
Submit Questions for FAQ
Please review the FAQ to confirm the question or topic was not previously covered.
Any followup questions for FAQ should be requested as a separate FAQ submission.
-
Is this item specifically the Bilt Nical 125 Water Softener? Your description states both 4" high and 2" high, what are the correct dimensions of this item?
-
Q Is this item specifically the Bilt Nical 125 Water Softener? Your description states both 4" high...... Read more answer nowAsked on September 3, 2026 7:50 pmA
According to the manufacturer, the current dimensions for this filter are approximately 80 mm tall by about 40.5 mm in diameter with approximately 6 mm diameter hose fitting.
The hose on my Francis X5 is approximately 4.5-5mm in diameter, based on this measurement will it fit properly into the tip of this? I could not find the tip diameter specifications in your listing for this item. Can you please check and confirm? Thank you.
-
Q The hose on my Francis X5 is approximately 4.5-5mm in diameter, based on this measurement will it...... Read more answer nowAsked on September 2, 2026 6:57 pmA
According to the manufacturer, the approximate size of the hose fitting is 6 mm in diameter.
Will this Bilt in tank water softener fit the water hose on a Francis Francis X5?
-
Q Will this Bilt in tank water softener fit the water hose on a Francis Francis X5? answer nowAsked on September 1, 2026 10:18 pmA
Since we have not carried this machine in over 15 years, we are unsure if it will fit or not.
Can I use this with my Lelit Victoria? I purchased the Lelit 70L water filter but the filter would only lay flat in the water reservoir. Thank you in advance. Brad
-
Q Can I use this with my Lelit Victoria? I purchased the Lelit 70L water filter but the filter woul...... Read more answer nowAsked on January 14, 2025 2:29 pmA
Yes, you can, BUT the Oscar should not be used in conjunction with the Lelit softener.
will this work for a vbm HE machine
-
A
Only ones without a hose. If the VBM has 2 hoses, the V725 water softener gets attached to the longer hos after recharging it.
Will this work on the LELIT PL41TEM?
-
A
In some cases of older machines, the water tank opening is not large enough for this water softener. Please make sure the opening on the water tank is 2" or larger.
Hello, Would this work with the Bezzera Aria Pid? And will this be enough?
-
Q Hello, Would this work with the Bezzera Aria Pid? And will this be enough? answer nowAsked on July 15, 2024 12:39 amA
Yes, this should work on the the Bezzera Aria espresso machines. Unfortunately, we can not answer the second part because it depends upon your water hardness and how often the filter is recharged.
Can you use these with Olympia Cremina and Olympia Maximatic espresso machines?
-
Q Can you use these with Olympia Cremina and Olympia Maximatic espresso machines? answer nowAsked on April 24, 2024 9:35 pmA
Sorry, these can not.
Will this work in the Breville Touch Impressa?
-
A
Sorry, we believe it will not.
Did I read correctly that I need to regenerate the softener with salt prior to the first use?
-
Q Did I read correctly that I need to regenerate the softener with salt prior to the first use? answer nowAsked on June 14, 2023 5:03 pmA
Yes.
-
- 1
- 2
-
