DISCONTINUED Bezzera 5074466SG Front Body Panel
This product has been discontinued at 1st-line Equipment.
Please visit one of the links below for more comparable products.
Please visit one of the links below for more comparable products.
This product is already in your quote request list.
SKU: 5074466SG
Categories: Bezzera Espresso Machines & Espresso Machine Parts, Bezzera Parts, Espresso Parts
Bezzera 5074466SG Front Body Panel
This front body panel (5074466SG) is for the Bezzera Strega (R – direct connect) espresso machine models with a manufacture date up to 03/01/2016.
- For the S – tank & the TOP – switchable versions, please see SKU 5074466.02SG.
| Brand | Bezzera |
|---|
Bezzera 5074466SG Front Body Panel
Leave your review
Rating
Publish review
Bezzera 5074466SG Front Panel: Discounted Parts & Shipping
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
Hello, I have a new Bezzera Strega top, and have been looking around for spare parts! I found this: https://www.1st-line.com/buy/bezzera-5074466sg/ but it notes that it's for the S model up to 2016, and notes to search for SKU 5074466.01SG for the newer top model. However, doing so leads me right back to the other part. Would this work on the new stregas? Additionally, are you aware of any drip tray from another machine that would fit the strega? The strega's is too short, and/or not long/deep enough. Purge water from the group, steam sprays onto floor. Same with steam wand! Anyways, thought I'd reach out! Thanks in advance!
-
Q Hello, I have a new Bezzera Strega top, and have been looking around for spare parts! I found thi...... Read more answer nowAsked by Andrew on December 11, 2024 4:28 pmAnswered by the admin
Unfortunately, we are unable to confirm fitment as your machine may have comes from a different supplier and there may be differences. It is best to check with Bezzera with your serial number and production date. We do show both front panels are available - there are differences between both, and you may need to check the holes on your current machine panel, especially the lower center section.
As of this time, there are no other drip trays that will fit as body parts are usually designed for each specific machine.