Parts Diagram – Lelit PL62X Mara

Use the diagrams below to help find the exact part you are looking for. After you find the part, copy the corresponding SKU #. Then use the search bar at the top of our website. If there are no results in the search, we most likely do not have the part.
Please note we only special order parts if the specific model was purchased through 1st-line Equipment.
For general questions regarding any parts, use our parts inquiry page.

SKU
1100038
1100041
1400183
1400186
1400187
1400198
1400199
2200082
8600018
9200014
9500039
CD376
MC268

SKU
2000020
8300008
8700012
9100044
9600088
9600092
9600105
9700040
9700050
9700052
CD024-442
GV025-20
MC032
MC919
4000038
4000029
4000039

ATTENTION! As indicated in the diagram, the heating element must be screwed in at 100 Nm. Be sure you have the correct equipment to assemble the part before you buy it.

SKU
1600028
3000048
3700028
3700029
9600028
9600052
9600080
9600096
AST114
AST128
CD349C
MC786

ATTENTION! As indicated in the parts diagram, the code 3700029 must be screw at 1,2 Nm!

SKU
2100029
2100030
2100031
2100032
2100033
2100034
2200110
3700021
3700086
8600010
9700023
MC043
MC101

SKU
1000007
1000008
1300001
2200100
8700006
9700010
2200011
4000030

ATTENTION! The components enclosed in brackets are part of a reset kit for wand (code 4000030). They cannot be ordered individually like the other components, but you must buy the entire kit (part1 + part2 + part3 + part4). 1 kit contains the spare parts for 1 wand reset.

SKU
1300000
1300002
1300003
2200054
2200090
2200091
2200092
2200095
2200106
3700005
8700000
8700007
8700015
8700017
8700028
8700040
9100000
9700000
GV654
MC918
MC927
MC930-2
MC930-3
MC930-4
4000032
4000033

ATTENTION! The components enclosed in brackets are part of a reset kit for E61 (code 4000032). They cannot be ordered individually like the other components, but you must buy the entire kit (part1 + part2 + part3 + part4 + part5).

SKU

4000040

SKU

9700045

9700062

MC117-220

MC931

4000041

NB: Please pay attention to the numbers (1 and 2) marked on the body of the solenoid valves, and reassemble the valves following the direction indicated in the image.

ATTENTION! Holding the solenoid valves and the metal fittings in place during the assembly is a difficult operation for which special equipment and sealants are used. The fittings also have both conical and cylindrical threads. We recommend the purchase of the entire assembly code 4000041.