Ulka Pump Model EA Type EAP5
The optional male fitting that threads onto the output end should have some thread seal tape or Loctite with NSF approval to make a good seal.
This ulka pump is interchangeable with the same brand and style pump that is 41 watts.
This pump and the brass compatible can be found on the following makes of espresso machines:
- Ascaso, Ala di Vittoria, Bezzera, Didiesse, Faema, Gaggia, Grimac, Isomac, la Nuova Era, La Pavoni, La Spaziale, Magister, Nuova Simonelli, Pasquini, Philips/Saeco, Quickmill, Rancilio, Rocket,
- Lelit – MC006
- Nemox – 068000141
- VBM – POMPVIBDOM120
- 52 watts.
- 120 volts.
- 60 hertz.
- PLEASE MAKE SURE TO CHECK YOUR ESPRESSO MACHINE PRIOR TO PURCHASING THE REPLACEMENT PUMP.
- Sometimes, a vibration pump will develop an airpocket in shipping or from storage. To remove the airpocket, use a turkey baste filled with water and push the water through the pump while powered on / operating. Make sure the other end is clear and drained, or connected within machine AND air can escape the other side (through open grouphead valve, steam valve open, etc).