Mahlkonig EK43S Commercial Retail Coffee Grinder


Found a better offer? Let us meet or beat it!

Available in Matte Black or Matte White

Learn more about the other commercial espresso grinders we carry!

Earn 2700 EspressoPoints worth $54.00! (Learn about EspressoPoints)

Earn 2700 EspressoPoints worth $54.00! (Learn about EspressoPoints)
Featured Videos
Step VS Stepless


Firstly, the Mahlkonig EK43 is Mahlkonig’s fastest 115 volt retail coffee grinder in the 

Furthermore, this classic metal coffee grinder for restaurants and cafes continues the tradition of the reliable MAHLKONIG. In other words, it is exceptionally sturdy with a very high grinding capacity. Additionally, this grinder may be equipped for Turkish-fine mocha. Moreover, its hopper may be locked with a slide plate and bags may easily be clamped into the holder. Primarily, to connect this high performance grinder, simply plug it into a normal power outlet. Finally, here are some of the revolutionary grinder’s features for consideration.

Mahlkonig EK43S Features:

  • Stylish, upscale European design fitting in smaller space-saving housing
  • Color Availability: Matte Black or Matte White
  • Chill grinding discs
  • Easy grind grade adjustment
  • Use for filter, espresso, or turkish-fine grinding
  • Hopper magnet and finger protection
  • Motor and electrical overload protection
  • Cleans spout
  • 21 different grind settings

Mahlkonig EK43S Specifications:

  • Measurements: 26″ H x 9″ W 16″ D (68cm H x 23cm W x 41cm D).
  • Weight: 54 pounds (24.5 kilograms).
  • Power: 115 Volts, 60 Hertz, 12 amps
  • Bean Hopper Capacity: 1.76 pounds (800 grams).
  • Idle Speed: 1450 rpm (50Hz); 1760 rpm (60Hz).
  • Grinding disc diameter: 3.86 inches (98 millimeters).
  • Made in Germany.
  • UL/ETL/CSA Listed.

Additional information

Weight (pounds)


Width (inches)


Height (inches)


Depth (inches)




Select Color

Matte Black, Matte White

Hopper Type

Short Hopper, Tall Hopper

Hopper capacity (grams)


Voltage (volts)

110 – 120

Grinding speed (RPM)


Espresso Grinder Warning

  • CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
  • ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.

  1. This item will be drop shipped from the manufacturer.
  2. Please note that the manufacturer will produce different colors of this grinder. They do not notify any retailers in advance to which color will be imported. Therefore, the color of the grinder shown is for illustrative purposes, and the grinder ordered and shipped will most likely be different than shown. This applies to all resellers in the USA for this manufacturer.

  1. Changing grind settings: As with all coffee grinders, it is very important to only change grind settings when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  2. Finding coffee grinds in a new grinder: We have confirmed that the manufacturer tests EVERY grinder with coffee beans before it leaves their facility, but they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging when you unwrap it.
  3. Static issues: There are static issues with all grinders, even the highest quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, trying using a different blend of beans.
  4. Replacing burrs: NEVER use a flat head screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.
  5. Electrical cord: Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish / slice to damage the cord.

Customer reviews


There are no reviews yet.

Be the first to review “Mahlkonig EK43S Commercial Retail Coffee Grinder”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

    There are no questions yet. Be the first to ask a question about this product.

    Send me a notification for each new answer.