DISCONTINUED Bezzera BZ13 PM Semi-Automatic HX Espresso Machine

This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

This product is currently out of stock and unavailable.

Bezzera BZ13 PM Semi-Automatic HX Espresso Machine – ETL/NSF Approved

Overview:

Users can install the Bezzera BZ13 PM anywhere without connecting to the main water supply net. Fortunately, its heat exchanger (HX) system as well as its practical groups heating system allow for the brewing of cappuccinos, coffee, and tea for a small community of coffee drinkers. The BZ13 PM’s hydraulic and electric systems allow for a thermal stability and an accurate setting of the temperature equal to machines in the professional segment.

Additionally, a push button controls the group, and the push button activates a vibration pump and opens the group solenoid valve to deliver coffee. Furthermore, once users notice the amount of coffee they want, the group will stop if they press the push button again.

Features:

  • Heat exchange (HX) system: Steam is always readily available. Hence, there is no wait time going from coffee to steam mode. Works well if entertaining a small group of people.
  • Tank only.
  • Single pump gauge.
  • Black handles.
  • Electrical heating.
  • Automatic boiler water supply.
  • Automatic stopping of electric resistances in case of lack of water in the boiler.
  • Vibration pump.
  • Stainless steel body polished to a mirror finish.
  • Group heated by electrical resistance.
Brand

Bezzera

Height (inches)

14.5

Width (inches)

10, approximate

Depth (inches)

18, approximate

Weight (pounds)

41, approximate

Wattage (watts)

1200

Voltage (volts)

110

Boiler capacity (liters)

1.5

Portafilter size (mm)

58

Tank capacity (liters)

3

Country of manufacture

Milan, Italy

Espresso Machine Warning:

  • ELECTRICAL WARNING: To avoid electrical damage to this espresso machine which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. the lack of the recommended surge suppressor, the espresso machine can be damaged at the power switch, the electronics, the heating element, the pressurstat or the wiring inside.
  • WATER WARNING: To increase the useful life of and not damage your espresso machine, please use softened water. Softened water is water without calcium and without magnesium, but still has other minerals for espresso extraction. Do not use distilled water, purified water, nor reverse osmosis water as these types of water create oxidation with the metals and cause the same damaging effects as limescale.
  • DESCALING WARNING: We do not recommend descaling unless there is an issue with the espresso machine. The reason is that too much descaling can eat away at the metals and gaskets inside an espresso machine.

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED Bezzera BZ13 PM Semi-Automatic HX Espresso Machine”

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

    The latest version of the BZ13 has PIS temp control but I don’t see that identified here. Is this an earlier or older BZ13?
  1. 0 votes
    Q The latest version of the BZ13 has PIS temp control but I don’t see that identified here. Is this...... Read more answer now
    Asked by Gregory Frankenfeld on December 22, 2021 12:39 am
    Answered by the admin Only the electronic touchpad version has the PID screen.
  2. #7633338 switch #5094847SG working frontal panel PM
  3. 0 votes
    Q #7633338 switch #5094847SG working frontal panel PM answer now
    Asked by aldo on December 7, 2020 1:14 am
    Answered by the admin

    Sorry, these are not a stock item. We will special order for customers who purchased their BZ13 from 1st-line. If you purchased from another vendor, please contact that vendor as each dealer is responsible for its own customers.

     

Send me a notification for each new answer.