Ascaso I…71 Pump Suction Fitting
- This rubber/silicone elbow typically gets attached to the intake of an ULKA pump of many espresso machines. It is also used on the Cuadra bleeder valve, older Lelit vacuum pressure valves and other machines
- We suggest ordering a few, especially if on the hot or steam side, as these wear and tear faster when under heat.
- Silicone tubes usually get connected to the smaller side, and the larger diameter opening connects to the ULKA pump intake side.
- Some customers use tie-wraps to secure the connections
- Similar SKU: MC017, NE.459
This part is a suitable replacement for the following part numbers:
Ascaso I…71
Azkoyen 09712080
Bezzera 7303001 and 7303006
Ceme 8.01.033, 801033, and 30400070
Elektra 02582035
Expobar 30400070
Fiorenzato CS A1300060 G
Gaggia 11002149, 147920150, 996530001186, B0095, DM1596, and PA1051
Grimac 1230200004 and MG187
Lavazza 10065509, 10079052, and 10079766
Nuova Simonelli 05180006
Pavoni 0DMC017 and 0R13180010
Rancilio 38121034
Reneka 9005852
Rocket C449900709
Saeco 11002149, 147920150, 996530001186, and 9991.084
Ulka 8.01.033
Ascaso I…71 Pump Suction Fitting
1 review for Ascaso I…71 Pump Suction Elbow Fitting