1st-line V128K Joystick Steam/Hot Water Valve
$118.09
This product is already in your quote request list.
SKU: V128K
Categories: 1st-line, 1st-line Parts, Espresso Parts
Frequently Bought Together
Order a black or walnut wood knob for each valve.
1st-line V128K Joystick Steam/Hot Water Valve
This valve (V128K) is a commercial-grade steam joystick valve that was custom-ordered for the Lelit Bianca and Mara espresso machines.
This valve can lock in “partial” open positions. There is another valve (V224) that only locks in “full” open positions.
- Gray stem
- Knob sold separately
- Accepts OEM parts from Lelit wand
- 1/4″ pipe connection
- 3/8″ wand connection
1st-line V128K Joystick Steam/Hot Water Valve
1 review for 1st-line V128K Joystick Steam/Hot Water Valve – Stem w/ Holding Position
Add a review Cancel reply
You must be logged in to post a review.
Submit Questions for FAQ
Please review the FAQ to confirm the question or topic was not previously covered.
Any followup questions for FAQ should be requested as a separate FAQ submission.
-
Is the project completed and are these good to purchase? If not, any idea on when the full conversion kit will be finalized?
-
Q Is the project completed and are these good to purchase? If not, any idea on when the full conver...... Read more answer nowAsked on December 5, 2022 12:49 amA Sorry, we are still waiting on this.
Sounds like this has problems integrating with the original Lelit steam wand. Does it work better with the 1st-line Cool Touch wand?
-
Q Sounds like this has problems integrating with the original Lelit steam wand. Does it work better...... Read more answer nowAsked on October 29, 2022 1:07 pmA This part is part of a bigger project that we can not disclose at this time.
Do these fit the lelit marax v1
-
A
Sorry, we do not think it does.
Is this good to purchase now for my lelit bianca v2? Or is it still in progress?
-
Q Is this good to purchase now for my lelit bianca v2? Or is it still in progress? answer nowAsked on March 19, 2021 11:42 pmA Still in progress.
Will this fit my lelit bianca v2?
-
A
Please do not purchase this yet as we are working on some conversion parts.
zoo.brown22 (verified owner) –
Considering it says ” custom ordered for the Bianca ” I expected it to work better with the Lelit. Into the machine is the easy part, it’s where the steam wand attaches it gets interesting.
The stock wand has a brass cap on the ball end that holds a spring and that seats inside the valve and then the nut screws on to hold it together under the valve.
This valve will not take the spring, the ID of it is too small. I found a smaller stiff spring that would fit inside but putting it all together, well it needs the flange to seal the wand nut properly so steam does not leak out.
I couldn’t get a washer or enough tape on it to seal it properly, even using the lock nut that comes with it.
While the joystick worked well and I really liked it, it leaks so no go for me. Yes, I read no warranty no returns so I’m stuck but honestly, It should have worked better.