DISCONTINUED Macap M2D Espresso Coffee Grinder – doserless, chrome, stepped, programmable

Overview:

This espresso only, doserless grinder is fantastic for home or small office use. There is a knob on the bottom of the grinder that allows the user to change the time the grinder is to grind the beans for after the push button is depressed. This programmable dosage feature offers a more consistent dosage of the grinds into the portafilter over the conventional M2 grinder which has a user controlled on/off switch.

The powerful 150 watt motor is more than plenty for the home environment. The steps on the adjustment wheel allow the user to get back to certain settings without the fuss that is found on stepless grinders.

Features:

• Stepped grinding regulation.
• Height-adjustable filterholder.
• One programmable dose.

Specifications:

• Measurements: 15.1″ H x 6″ W x 9.9″ D (38.2 cm H x 15.2″ W x 25 cm D).
  • Height from countertop to bottom of chute: 5″ (12.7 cm).
• Net weight: 10.4 pounds (4.7 kilograms).
• Power: 150 watts, 110 volts, 60 hertz.
• Flat grinding blade diameter: 50mm.
• Coffee beans hopper capacity: 0.55 pounds (250 grams).
• Made in Venice, Italy.

Notes:

1. Cleaning the parts on the Macap – before use, the bean hopper and covers should be cleaned with a mild, non-abrasive soap and rinsed.
2. No retro kit available to upgrade older grinders.
3. Please note as with all coffee grinders, it is very important to only change grind settings on Macap coffee grinders when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and will not be classified as a defective grinder – meaning this is not covered under warranty. Macap grinders are considered commercial equipment for grinding coffee only and can not be returned once used.
4. Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish/slice to damage the cord.