|
Elektra Micro Casa Semiautomatica Chrome
with Murano Glass Espresso & Cappuccino Machine
Item# ART.SXCD
Regular Price: $2,549.00 US Dollars
Sale Price: $2,099.00 US Dollars
Click here for other Elektra
semi automatic machines
|
Elektra Micro Casa Semiautomatica Chrome
with Murano Glass Espresso & Cappuccino Machine
Features:
- Beautiful long lasting chrome finish combination.
- Bakelite handle on portafilter.
- Three red switches - power, coffee brew, & boiler refill.
- Murano glass situated on dome.
- Large, round base with 10" diameter for stability of unit
on countertop.
- Water level sight glass with pressure gauge.
- Pump-operated to deliver water to grouphead and to refill boiler.
- Heat exchanger system with proper temperature to extract
the most flavorful espresso beverages!!!.
- Only assembly required is the attachment of the steam wand.
- Manual water refill switch for boiler.
- Boiler pressure relief valve for safety.
- Durable brass boiler that provides very dry steam for frothing
milk.
- Extended steam wand away from boiler.
- Twist knob-controlled steam valve for quick turn ons and
offs!
- Three way solenoid valve to relieve pressure in grouphead when
finished extracting espresso to avoid "espresso explosion"
when removing the portafilter handle.
- Top loading water basin for easy refill and for continuous water
delivery (manual switch by operator) so machine does not have
to be shut down like hand lever models.
- Armour-plated, 800 watt heating element.
- Automatic pressure/temperature regulator.
Specifications:
- Measurements: 23" H x 10" W x 10" D (58cm H x
26cm W x 26cm D).
- Power: 110 volts only, 60 Hz, 15 Amp.
- Boiler Capacity: 67 ounce (2.0 liters) approximate.
- Filter basket size: 58mm
- Warranty: One year parts and labor warranty limited to manufacturer's
defect handled by 1st-line Equipment LLC.
- Manufactured in Italy.
Notes:
- Warranty Note: Please note that it is very
important to use 'softened water' in these machines, as well as
all espresso machines. Hard water will cause these machines to
malfunction, and Elektra will not cover the parts warranty due
to hard water. In addition, it is extremely important to run the
a leva and Semiautomatica machines with water at least 25% full
in the sight glass. Running these models with a water level lower
than this can cause heating element damage which will not be covered
under warranty as this is not a manufacturer's defect. If you
return the unit with a damaged heating element, you will be charged
for the repair, and the repair charge will be deducted from the
credit.
- The water in the boiler is not used to make coffee. The water
to make coffee comes directly from the reservoir and passes through
a pipe in the bottom boiler for flash heating. If cold water passes
through this pipe, the change in temperature will cause the boiler
water (sight glass) to fluctuate. The only time the water level
in the sight glass should change is when
a) the steamer is used and the water level drops, or
b) the red button on the left hand side of the base is depressed
and held to refill the boiler.
- There is a safety feature on this machine when water is not
pumped into the boiler on initial startup. If this isn't done
the safety kicks off and the machine will have to be reset. On
the bottom of the machine underneath the yellow cap there is a
reset button for the safety thermostat. If you purchased the machine
from us and are still having issues, you can email us for instructions.
- To learn more about this espresso machine, read Home-Barista.com's
Buyer's
Guide to the Elektra Microcasa Semiautomatica.
- This machine is for home use only.
|
