Lelit Technical Support

Not Grinding – Lelit PL53

Disclaimer: The technical support below for information purposes only. 1st-line Equipment, LLC is not responsible for any injury or damages resulting from such information. Please note that parts are available for purchase from 1st-line Equipment. These parts do not include any technical support. If you're not familiar with the technical aspects of repairing equipment, please order a diagnosis on our website. By continuing to read further, you agree to abide by all the terms and conditions on this web site. If you do not agree, please stop here.

Problem

The Lelit PL53 will not grind. The motor turns, but when beans are in the hopper, they do not move and nothing comes out of the chute.

Solution(s)

Grind setting is too fine

While your grinder is on, slowly take your grinder to a coarser setting.

Coffee chute is clogged

This can occur from too fine a grind. While you grinder is off, use a brush and clean the inside of the coffee chute.


Please note the above information is subject to copyright. It cannot be published in any means without the expressed written consent of 1st-line Equipment, LLC.