Disclaimer: The technical support below for information purposes only. 1st-line Equipment, LLC is not responsible for any injury or damages resulting from such information. Please note that parts are available for purchase from 1st-line Equipment. These parts do not include any technical support. If you're not familiar with the technical aspects of repairing equipment, please order a diagnosis on our website.
By continuing to read further, you agree to abide by all the terms and conditions on this web site. If you do not agree, please stop here.
If your steam or hot water wands squeak on your Elektra commercial espresso machines, then you have lime scale build up or need new gaskets.
With machine cold, remove the wand nut (under the valve) carefully with a crescent wrench and be careful not to scratch the plating.
After removal, lubricate the wand ball (on top of wand) and the spring holder with high temperature food grade grease, such as Petrogel found on our web site.
Reassemble and the squeaking should go away.
Please note the above information is subject to copyright. It cannot be published in any means without the expressed written consent of 1st-line Equipment, LLC.