ECM Mechanika Slim Brain Unit Wiring

Disclaimer: The technical statements, support, information and recommendations contained herein are believed to be accurate as of the date hereof, but 1st-line Equipment, LLC does not make representations or warranties, express or implied, as to its accuracy, its completeness, or the results to be obtained. The information is being provided for informational purposes only and is intended for use by persons having adequate skill and expertise regarding the proper selection, use and application of the products and recommendations and at their own risk and discretion.

1st-line Equipment, LLC is not responsible for any injury or damages from such information. Please note that parts are available for purchase from 1st-line Equipment, LLC self service parts portal. These parts do not include any technical support. If you're unfamiliar with the technical aspects of repairing equipment, please contact a professional for proper evaluation.

By continuing to read further, you agree to abide by all the terms and conditions on this website. If you disagree, please leave our website.

Please use these pictures below when servicing your own machine. These photos apply to the ECM Mechanika Slim Brain Unit.

A black Gicar US1004 electronic control unit, similar to those in ECM Mechanika machines, with multiple colored wiring connected on top and a wiring diagram with technical specifications printed on the front label. © 2025 1st-line.com
A close-up view of an electronic devices wiring, featuring multiple colored wires connected to a black rectangular Slim Brain Unit. © 2025 1st-line.com
A metal L-shaped mounting plate with two bolts, a cutout window, and an electrical relay attached at the top with red, black, and white wiring connected to it—perfect for ECM Mechanika or Slim Brain Unit setups. © 2025 1st-line.com

Please note the above information is subject to copyright. It cannot be published by any means without the expressed written consent of 1st-line Equipment, LLC.