Packing Bellezza Bellona

Power off the machine and let it cool.

Remove the drip tray and put in the clear bag.

Wrap the power cord and place in the long white bag.

The rectangular white bag you place over the drip tray frame.

Rotate the steam wand into the front body. Wrap it bubble wrap or some kind of protection.

Place the large bag over the machine.

Lay the foam packaging on a table.

Lay the machine into the packaging (whichever side you choose). The drip tray fits into the slot just above the drip tray frame. The power cord runs under the machine and fits into the hole in the lower corner.

Place the other side of the packaging onto the machine. The machine, drip tray, & power cord should line up and fit to the other side.

Make sure the box is empty. There should be 4 long corner edges.

Slowly place the machine into the box.

Insert the 4 corner edges.

Arrange all the loose parts as shown.

The tank or the brush doesn’t have a bag. The hose sits inside the tank. The extra steam tips and backflush insert share a bag.

The tank stem is taped to the top foam piece. Also place the instruction manual on top.

Place the parts box above the machine.

Tape the box.