Showing 1393–1408 of 1878 resultsSorted by price: high to low

A small, cylindrical brass fitting with a threaded screw end is shown on a plain background. Its polished surface indicates it is a component designed for the F..210 VALVE BODY. © 2025 1st-line.com

F..210 VALVE BODY

$2.49
-50%
Close-up of the V..655 Modern Water Pipe Wand Diffuser Fitting/Aerator featuring a metallic build, honeycomb mesh interior, and a logo on top reading 1st-Line Equipment Espresso Machines & Grinders. © 2025 1st-line.com

V..655 MODERN WATER PIPE WAND DIFFUSER FITTING/AERATOR

$4.99 $2.49
The V..378 SMALL SOLENOID CONNECTOR is a black plastic L-shaped connector with a ribbed cap and the 1st-Line Equipment logo on the side, shown against a white background. © 2025 1st-line.com

V..378 SMALL SOLENOID CONNECTOR

$2.49
The V..377 FLOWMETER CONNECTOR is a black plastic connector with a metal screw and mounting bracket, shown on a white background. The image displays the “1st-Line Equipment” watermark and is identified as V..377. © 2025 1st-line.com

V..377 FLOWMETER CONNECTOR

$2.49
The V..319 3/8f-3/8m FITTING is a brass hexagonal pipe adapter with external and internal threads and a metallic gold sheen, shown unused against a white background. © 2025 1st-line.com

V..319 3/8f-3/8m FITTING

$2.49
-50%
The V..309 3/8 M x 3/8 M Pump Fitting is a metal connector with a hexagonal center, used to join two pipes or hoses. Image watermark: 1st-Line Equipment Espresso Machines & Grinders. © 2025 1st-line.com

V..309 3/8″ M X 3/8″ M PUMP FITTING

$4.99 $2.49
The BE..92 STEAM PIPE CAP is a brass cylindrical spacer with a central hole and grooved sides, typically used in espresso machines. Photographed on a white background with the 1st-Line Equipment watermark visible. © 2025 1st-line.com

BE..92 STEAM PIPE CAP

$2.49
The BE..85 VALVE SPRING 12x30 mm is a metal coil compression spring displayed at an angle on a white background, with a 1st-Line Equipment watermark across the center. © 2025 1st-line.com

BE..85 VALVE SPRING 12×30 mm

$2.49
The AS..72 Modern Boiler PTFE Gasket (58x43x2mm) is a white circular ring with a subtle 1st-Line Equipment logo in the lower right corner, shown on a plain white background—perfect for sealing modern boiler components. © 2025 1st-line.com

AS..72 MODERN BOILER PTFE GASKET 58x43x2mm

$2.49
-50%
The V..830 2 CUPS POD FILTER is a metal espresso machine filter basket with small top-surface holes, designed to hold coffee grounds during brewing. © 2025 1st-line.com

V..830 2 CUPS POD FILTER

$4.95 $2.48
A close-up of an EK..91 WASHER with a central circular hole, shown on a plain white background. © 2025 1st-line.com

EK..91 WASHER

$2.44
A round, metallic C..243 GIGLEUR/GICLEUR part features a small conical indentation on top, some fibers on its surface, and is stamped with the 1st-Line Equipment Espresso Machines & Grinders logo. © 2025 1st-line.com

C..243 GIGLEUR/GICLEUR

$2.44
The SM.406 LEVEL GASKET is a white, circular silicone gasket with a ridged edge and slightly translucent appearance, commonly used as a replacement part for espresso machine steam wands. © 2025 1st-line.com

SM.406 LEVEL GASKET

$2.35
The BF.668 ORANGE CRYSTAL is a translucent brown plastic portafilter insert for espresso machines, featuring subtle orange crystal tones. Photographed against a white background with the 1st-Line Equipment watermark. © 2025 1st-line.com

BF.668 ORANGE CRYSTAL

$2.30
A F..491 LARGE LEVER, made of brown plastic and metal with a rectangular handle and cylindrical end, is shown on a white background. © 2025 1st-line.com

F..491 LARGE LEVER

$2.29
The F..998 SPRING GUIDE is a round, flat brass disk with a central hole and four evenly spaced surrounding holes, resembling a gear when viewed from above. © 2025 1st-line.com

F..998 SPRING GUIDE

$2.29
Secret Link