Showing 385–400 of 1899 resultsSorted by price: high to low

-50%
A top-down view of a shiny metal Gaggia FILTERHOLDER BODY with a single hole in the center and a handle attached to the side. © 2025 1st-line.com

Gaggia FILTERHOLDER BODY

$27.49 $13.75
-50%
A GI.363 HOT WATER PIPE, featuring a shiny metal finish, cylindrical base, angled rods, and a ball-shaped end, is photographed on a white background. © 2025 1st-line.com

GI.363 HOT WATER PIPE

$26.99 $13.49
-50%
The SP..86 TAP BODY is a brass plumbing fitting with three threaded openings (upward, sideways, and downward) in a T-shape. It has a textured surface and “JSCB” embossed on the body. © 2025 1st-line.com

SP..86 TAP BODY

$26.99 $13.49
-50%
A gray, circular Cimbali PTFE Boiler Gasket (180x140x3mm) with five evenly spaced edge holes is displayed on a white background. The 1st-Line Equipment logo appears in the lower right, suitable for Cimbali machines. © 2025 1st-line.com

Cimbali PTFE BOILER GASKET 180x140x3mm

$26.99 $13.49
-50%
The C..245 15 BAR SINGLE SCALE PRESSURE GAUGE is a round gauge with a black frame, labeled 0–15 bar. It features blue and green segments on the face, a white needle, and the “1st-Line Equipment” logo at the bottom center. © 2025 1st-line.com

C..245 15 BAR SINGLE SCALE PRESSURE GAUGE

$26.99 $13.49
-50%
A BF.114 TAP ROD with a threaded end and hexagonal tip is shown against a white background, featuring 1st-Line Equipment branding. © 2025 1st-line.com

BF.114 TAP ROD

$26.99 $13.49
A close-up of a small cylindrical electronic component with two flat metal terminals and T24 and LC markings, resembling a part from the Faema NanoQuartz Convex Spokes Dispersion Screen, placed on a white background. © 2025 1st-line.com

SAE.10 92 DEGREE THERMOSTAT

$13.41
The BF.115 TAP SCREW, a metal hex bolt with a top slot and a hole through its cylindrical body, is photographed on a white background. © 2025 1st-line.com

BF.115 TAP SCREW

$13.36
A Futurmat New Ariete/Rimini/C.F.E. STEAM OUTLET PIPE, shown on a white background, features a shiny metal offset box wrench with a bent handle and open circular head, ideal for steam outlet pipe maintenance tasks. © 2025 1st-line.com

Futurmat New Ariete/Rimini/C.F.E. STEAM OUTLET PIPE

$13.30
-50%
Close-up of a La Cimbali 2 POSITION 16A GROUP SWITCH with central shaft and labeled terminals for espresso machine and grinder control; label shows technical specs and branding. © 2025 1st-line.com

La Cimbali 2 POSITION 16A GROUP SWITCH

$25.99 $12.99
A close-up of the LT...1 90ºC THERMOSTAT featuring two mounting holes and two electrical terminals, shown against a white background. © 2025 1st-line.com

LT…1 90ºC THERMOSTAT

$12.99
The GI.625 SWITCH is a black electrical component with a hexagonal top, featuring various electrical ratings and symbols engraved on the front, shown against a white background. © 2025 1st-line.com

GI.625 SWITCH

$12.99
Close-up of the F.2951 ELBOW 1 CUP SPOUT, a shiny, irregularly shaped machine part with a threaded circular opening, photographed on a white background. © 2025 1st-line.com

F.2951 ELBOW 1 CUP SPOUT

$12.99
-50%
Close-up photo of the F..481 NO STOP STEAM/WATER VALVE KNOB BEZEL, shown with a brass fitting featuring threaded and ribbed ends, a small brass cap, and a valve knob on a white background. © 2025 1st-line.com

F..483 STEAM-WATER TAP BODY

$25.99 $12.99
A used F..191 UPPER C.F.E. LEVEL PIPE with a bent copper body, brass hexagonal fittings, and a threaded connector, showing wear and tarnish, is displayed on a white background. © 2025 1st-line.com

F..191 UPPER C.F.E. LEVEL PIPE

$12.99
The V.2270 3/8 Central Female T-Fitting is a shiny metal connector with three threaded ends, featuring a central female port for joining plumbing or hydraulic pipes. © 2025 1st-line.com

V.2270 3/8 CENTRAL FEMALE T-FITTING

$12.99
;
This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.
Secret Link