DISCONTINUED – Ceado E6X V2 Espresso Coffee Grinder

Ceado E6X V2 Espresso Coffee Grinder

Strong build

The Ceado E6X has a light alloy housing, asynchronous motor with thermal cut-out and polycarbonate hopper. Made with the finest, most reliable materials.

Stepless grinding adjustment

There are an infinite number of settings for grind fineness / coarseness as there are no preset settings found. This allows you to fine tune the perfect grind for your espresso machine.

• Steady lock grinder – This system ensures the distance between the burrs, as set by your chosen grind finess, will be consistent no matter what.
• Flat burrs – 64 mm in size. Large diameter burrs, combined with a low 300 watt motor, helps reduce the heat build up which can affect your coffee grinds. Made of hardened steel which are long lasting.

Bean hopper

Easy to install and remove.

• Bean stopper – Located near the bottom of the bean hopper. Useful if you are switching from one blend to another. You can push in the stopper, grind & dose out the remaining beans, pour out the rest of the beans in the doser and pour in new beans. If you have multiple hoppers, you can push in the stopper, grind & dose out the remaining beans, and then swap the hoppers.

Ground coffee doser

Collects the ground coffee and can be dosed for immediate or later use.

• Precision dose – The ground coffee will always fall in the right place in the middle of the portafilter.
• Dosing adjustment – Located in the center of the doser. Turning it clockwise decreases the amount of coffee dosed. Turning it counter clockwise increases the amount of coffee dosed. In order to change this setting, you will have to unscrew the fingerguard.
• Fingerguard – Protects your fingers from “accidentally” entering the coffee chute.

Grinds catch tray

Hooks onto the bottom of the grinder. Helps keep your counter nice and clean.