Pasquini Livia 90 Grouphead Gasket - THICK

DISCONTINUED Pasquini Livia 90 Grouphead Gasket – THICK

This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.
SKU: AS133 Categories: , , Tag:
  • This portafilter gasket typically fits the Pasquini Livia 90 espresso machine with Serial Numbers 27000 and before.
  • Please check to make sure which version your machine has – the thick has a straight edge (as shown above) and the thin (BE04)looks like a large rounded o-ring.
  • Recommended Maintenance Interval: Every 6 months if machine is on 4 or more hours every day or every 12 months
  • Does not fit the Pasquini Livia G4 series of espresso machines.
For more Pasquini parts & diagrams, please visit our Pasquini parts page. If you have any questions, please reference the Q&A tab on each product page.  
Brand

Pasquini

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED Pasquini Livia 90 Grouphead Gasket – THICK”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      I purchased a Livia 90 S from you, circa 2003, serial number 36176. I need to replace the grouphead gasket. I assume it is the "thick" gasket. Is that correct? Also, is it possible to replace the dispersion screen? If so, how and do you have the parts? Lastly, do you sell the solid backwash filter that fits into the portafilter? Thanks.
    1. 0 votes
      Q I purchased a Livia 90 S from you, circa 2003, serial number 36176. I need to replace the grouphe...... Read more answer now
      Asked by Keith B. Stein on April 19, 2019 2:40 pm
      Answered by the admin

      Please note the machine was purchased elsewhere as we only have parts purchases after reviewing your account.

      Without pulling out the gasket, it is very difficult to determine which portafilter gasket is in the grouphead. The reason is that Pasquini did not keep good records to offer us, and they had the machine manufactured by two different suppliers for them throughout the last 25 years. Therefore, the gasket needs to be pulled out and check.

      If the gasket has a round shape like an o-ring, then it is the thin.

      If the gasket has 4 squared edges, then it is the thick one.
      2. What is the correct gasket for a Livia G4 purchased in 2016, serial number LS004953615? Where do I find a white paper on this web site that will guide me through installing this gasket myself? The guy who answered the phone yesterday told me to click on "Pasquini Livia G4" for this information, but when I do that, all I get is a page that says the machine has been discontinued. If it's easier for you to call me, I'm in Manhattan and my cell is xxx.xxx.xxxx.
    2. 0 votes
      Q What is the correct gasket for a Livia G4 purchased in 2016, serial number LS004953615? Where do ...... Read more answer now
      Asked by Dan Freudenberger on March 27, 2019 2:59 pm
      Answered by the admin

      White papers are located in our Support section. Changing the portafilter gasket can be easy or difficult based on its age.