Ulka Pump – 52 watts 120V, 60Hz, Model EA Type EAX5, brass output
Ulka Pump Model EA Type EAX5 120V 60Hz 52 watt – brass output – the male fitting that threads onto the output end should have some thread seal tape or Loctite with NSF approval to make a good seal.
This pump can be found on the following makes of espresso machines: Ascaso, Ala di Vittoria, Bezzera 7731019, Didiesse, Faema, Gaggia, Grimac, Isomac, la Nuova Era, La Pavoni, La Spaziale, Lelit/Gemma, Magister, Nemox, Nuova Simonelli, Pasquini, Philips/Saeco, Quickmill, Rancilio, Rocket, and VBM. PLEASE MAKE SURE TO CHECK YOUR ESPRESSO MACHINE PRIOR TO PURCHASING THE REPLACEMENT PUMP.
Also replaces part number NE472, NE.472, I675, I.675, NE040006
Sometimes, a vibration pump will develop an airpocket in shipping or from storage. To remove the airpocket, use a turkey baste filled with water and push the water through the pump while powered on/operating. Make sure the other end is clear and drained, or connected within machine AND air can escape the other side (through open grouphead valve, steam valve open, etc). This pump can also be found and replaces pumps for most mobile smoke fog machines used in the entertainment industry.
Reviews
There are no reviews yet.