Ponte Vecchio Lusso 2 Group Espresso Machine
Ponte Vecchio Lusso 2 Group Espresso Machine

DISCONTINUED Ponte Vecchio Lusso 2 Group Spring Piston Lever Espresso Machine

4.6666666666667 out of 5 based on 3 customer ratings
(3 customer reviews)

Request a price match.
This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

.

SKU: LussoTwo Categories: , Tags: , ,

Ponte Vecchio Lusso 2 Group Spring Piston Lever Espresso Machine

Overview:

Ponte Vecchio is an Italian company that has been producing lever home espresso machines since 1999. It was founded by a number of entrepreneurs with over 20 years of experience in the industry of mechanical components for small household appliances. The new Ponte Vecchio Lusso 2 Group V2 has new improvements with the internal steam pipe in the boiler having extra welding to hold it in place. In older models, this pipe would sometimes break off.

Features:
  • Spring piston-operated grouphead – Lever starts in the upward position, the user pulls down against spring until coffee fills the bottom of a demitasse cup, then the lever is slowly released and the spring in the piston pushes the lever to pump the water through the coffee grinds. If making double, it is important to pull the lever down a second time at the halfway point and released.
  • Stainless steel/brass piston.
  • Removable drip tray & cup warming tray.
  • The gauge measures steam boiler pressure (0 – 2.5 bar) located on the right.
  • Visual control of water level located underneath the gauge.  Keep an eye on this control when filling the boiler.
  • Fixed-position 3-hole steam wand located on the left and fixed-position hot water wand located on the right.  Both are activated by rotational knobs on the left and right side of the machine.  Turn counter-clockwise to activate; counter-clockwise to deactivate.
  • Indicator lights on the left side of the machine.  The upper left light is the heating light. It is on when the machine is heating up; off when the machine is ready to use.  The lower left light is the water light.  It is on when the water in the boiler is too low; off when the water in the boiler is at the optimal level.
  • Grouphead and portafilter made from a chrome-plated brass casting: unit preheated by forced circulation of hot water from the boiler, always ready for use at optimum operating temperature.
  • Accessories included: (2) Dual spout portafilter, (2) non-E.S.E. pod filter basket, (2) 1-cup filter basket, (2) 2-cup filter basket, plastic coffee tamper, metal scoop, plastic funnel, instruction manual.
For more Ponte Vecchio equipment, please visit our Ponte Vecchio brands page. If you have any questions, please reference the Q&A tab on each product page.
Brand

Ponte Vecchio
Height (inches)

19, approximate
Width (inches)

15, approximate
Depth (inches)

17.5, approximate
Weight (pounds)

31
Wattage (watts)

1000
Voltage (volts)

110 – 120
Boiler capacity (liters)

3
Portafilter size (mm)

45
Approvals

CE

Espresso Machine Warning:

  • ELECTRICAL WARNING: To avoid electrical damage to this espresso machine which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. the lack of the recommended surge suppressor, the espresso machine can be damaged at the power switch, the electronics, the heating element, the pressurstat or the wiring inside.
  • WATER WARNING: To increase the useful life of and not damage your espresso machine, please use softened water. Softened water is water without calcium and without magnesium, but still has other minerals for espresso extraction. Do not use distilled water, purified water, nor reverse osmosis water as these types of water create oxidation with the metals and cause the same damaging effects as limescale.
  • DESCALING WARNING: We do not recommend descaling unless there is an issue with the espresso machine. The reason is that too much descaling can eat away at the metals and gaskets inside an espresso machine.

  1. Due to many issues of this machine being damaged in transit we add extra packing inside the machine that customers will have to remove.
  2. This machine cannot be backflushed.
  3. There is no spring to hold the basket into the portafilter.
  4. The pod filter baskets use special pods that are not E.S.E.
  5. Optional interchangeable colored panels fits the one and two group Lusso models.
  6. When using both groupheads, It's always necessary to start with right side grouphead first. This is due to the compact design of this model, which is the same dimensions as the 1 group model.
  7. Since the grouphead gaskets are new, you may notice initially that the portafilters will lock in different "positions." The gaskets will break in after use and will have the same start position.
  8. All groups and their components are made by hand. For example, the fork could have the hole connected to the piston with a 1 mm diameter more than the other, so one piston could reach the hole of the water 1mm before the other. Because of mechanical rules, the lever seems to push differently from the other because 1 mm for the piston means 20/30 degrees more or less for the lever. The volume of the water could not be different from one group to another because internal processing is done by a machine.

Customer reviews

Rated 4.6666666666667 out of 5 stars
3 reviews
5 stars 2 66 %
4 stars 1 33 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

2 reviews with rating of 5 stars (2 of 3)

(Show unfiltered results)

3 reviews for DISCONTINUED Ponte Vecchio Lusso 2 Group Spring Piston Lever Espresso Machine

Add a review

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      My machine is building excessive pressure. I did some digging and noticed a small part on the boiler with a reset button had been puttied into place and was blown off. I need the piece as well as the threaded insert into the side of the boiler but cannot locate either on the diagrams. I have a picture if that helps
    1. 0 votes
      Q My machine is building excessive pressure. I did some digging and noticed a small part on the boi...... Read more answer now
      Asked by Steven on May 8, 2022 12:28 pm
      Answered by the admin

      Sorry, we no longer have this part and we are no longer doing business with this manufacturer as they do not respond to our emails. Please contact them directly.
      2. My machine is building excessive pressure but hasn’t done this before. Not sure if it’s a pressure stat issue or a brain issue.
    2. 0 votes
      Q My machine is building excessive pressure but hasn’t done this before. Not sure if it’s a pressur...... Read more answer now
      Asked by Steven on July 27, 2021 11:20 am
      Answered by the admin Sounds like a pressurstat issue.
      3. The "brain" died on my Lusso. Your page for the part states you no longer sell it. https://www.1st-line.com/buy/ponte-vecchio-brain-unit-110-volt/ What do I do?
    3. 0 votes
      Q The "brain" died on my Lusso. Your page for the part states you no longer sell it. https://www.1s...... Read more answer now
      Asked by Rick on February 6, 2021 3:31 am
      Answered by the admin

      Sorry for the delay. This one required research as PV changed part numbers. Here is the latest version of brain units.
      4. Could I brew and steam at the same time with this machine?
    4. 0 votes
      Q Could I brew and steam at the same time with this machine? answer now
      Asked by apandaz on February 4, 2021 4:17 pm
      Answered by the admin

      You can, but then you are taking steam pressure away from the boiler while using that steam pressure to pre-infuse the espresso coffee.
      A Yes, when you release the lever, pre-infusion is over, the spring provides the pressure. You can steam while shot pours.
      5. I received my ponte vecchio lusso this week. It keeps kicking into safety mode upon turning on.. eg the boiler doesn’t heat and the low water level light comes on. I keep the water level halfway up. Sometimes it takes up to 10 turning on/off cycles for the machine to start up normally. What could be causing this?
    5. 0 votes
      Q I received my ponte vecchio lusso this week. It keeps kicking into safety mode upon turning on.. ...... Read more answer now
      Asked by Ian on September 4, 2020 4:59 pm
      Answered by the admin

      Sorry to hear this. We do bench test EVERY Lusso with water only for minimum 1 hour after the order arrives into our system and prior to shipping.

      If the water is too pure, the sensor will not be able to pick up the water. Please remove the water and add tap water to confirm it works.
      6. My machine keeps tripping internally (upper light is on then click and lower light is on) during startup. The red button inside stays in, if I flip the power switch the boiler will turn back on. How can I get this fixed?
    6. 0 votes
      Q My machine keeps tripping internally (upper light is on then click and lower light is on) during ...... Read more answer now
      Asked by Philip on June 22, 2020 5:53 pm
      Answered by the admin

      Sorry to hear this. The machine can be shipped in for repair after reviewing the following information.

      Any of the following parts can be defective: brain unit, power switch, or pressurstat.
      7. I have had this machine for about 1.5 yrs. Both groupheads squeak and grind(?) a little when I press the lever down. There is fine brass dust at the top of the grouphead where the piston comes out. How do I rectify this issue? Thanks.
    7. 0 votes
      Q I have had this machine for about 1.5 yrs. Both groupheads squeak and grind(?) a little when I pr...... Read more answer now
      Asked by bkirby0620 on October 21, 2019 3:35 pm
      Answered by the admin

      Lubrication may be needed in the piston. If the issue still occurs, it will need to be sent in to be evaluated by a technician.
      8. Is this a spring lever machine? I noticed the head is taller than normal but it doesn't say if it's spring lever or not in the description.
    8. 0 votes
      Q Is this a spring lever machine? I noticed the head is taller than normal but it doesn't say if it...... Read more answer now
      Asked by Ninh on June 18, 2019 12:54 am
      Answered by the admin Sorry, it is a spring piston lever espresso machine.
      9. I notice that the dimensions and weight for the 2-group Lusso are the same as the 1-group Lusso. That seems hard to believe. What are the actual dimensions and weight of these machines?
    9. 0 votes
      Q I notice that the dimensions and weight for the 2-group Lusso are the same as the 1-group Lusso. ...... Read more answer now
      Asked by David on November 15, 2018 6:39 am
      Answered by the admin

      Sorry, this is an error on our part. We will correct the information on both as soon as we can.
      10. I purchased ponte vecchio 2 group machine from you. Used daily fine, drained and stored it for about a year. Recently tried it but won't work. Turns on and heats up fine all seemed normal but no water will come out of the group heads. What can I do myself to get it working? I'm very mechanically inclined willing to work on it.
    10. 0 votes
      Q I purchased ponte vecchio 2 group machine from you. Used daily fine, drained and stored it for ab...... Read more answer now
      Asked by Mark on October 17, 2018 5:03 pm
      Answered by the admin

      We suggest you will the boiler with a descaling solution and try to get the solution through the grouphead. If this does not clear it, the grouphead will need to be removed or disassembled and evaluated for the blockage. Please note a special tool is needed to re-assemble the grouphead.