| Brand | Ponte Vecchio |
|---|---|
| Height (inches) | 20, approximate |
| Width (inches) | 7, approximate |
| Depth (inches) | 12, approximate |
| Weight (pounds) | 18, approximate |
| Wattage (watts) | 800 |
| Voltage (volts) | 110 – 120 |
| Boiler capacity (liters) | 0.9 |
| Portafilter size (mm) | 45 |
| Country of manufacture | Italy |
| Approvals | CE |
Espresso Machine Warning:
- ELECTRICAL WARNING: To avoid electrical damage to this espresso machine which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. the lack of the recommended surge suppressor, the espresso machine can be damaged at the power switch, the electronics, the heating element, the pressurstat or the wiring inside.
- WATER WARNING: To increase the useful life of and not damage your espresso machine, please use softened water. Softened water is water without calcium and without magnesium, but still has other minerals for espresso extraction. Do not use distilled water, purified water, nor reverse osmosis water as these types of water create oxidation with the metals and cause the same damaging effects as limescale.
- DESCALING WARNING: We do not recommend descaling unless there is an issue with the espresso machine. The reason is that too much descaling can eat away at the metals and gaskets inside an espresso machine.
Customer reviews
Add a review
Ask a question
Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.
-
Do you sell polishing solution/cream/potion to bring the mirror shine back to my Ponte Vecchio Export? Also, do you sell the lens that goes over the sight glass (mine has a hairline fracture and I’d like to replace if this is even possible?) thanks!
-
Q Do you sell polishing solution/cream/potion to bring the mirror shine back to my Ponte Vecchio Ex...... Read more answer nowAsked by on August 28, 2023 12:46 pmAnswered by the admin
Sorry, we are uncertain what could bring back the clear coat finish. Sorry, we no longer sell the cover.
Hi, I see that there are conflicting answer around what kind of tamper is included. It seems like some machines have a proper metal tamper and some have a plastic one. Is there a way to guarantee being able to get one with a metal tamper?
-
Q Hi, I see that there are conflicting answer around what kind of tamper is included. It seems like...... Read more answer nowAsked by on March 25, 2021 8:55 pmAnswered by the admin
Sorry, there are some machines with a plastic tamper, and some have a metal tamper. This is what happens when a manufacturer makes a change. At this point, we will update our machine pages noting which have a plastic tamper and which have a metal tamper. In addition, those with a metal tamper will have an increase in price for the metal tamper as we did pay more for those machines.
1. Do you happen to know how much pressure the spring will make initially and when it finishes? I’m just curious what kind of pressure it can build up, since it’s hard to find any real details.
2. For dosing, how much coffee would a double basket for, and what can you reasonably expect as an output.
3. Do all of them now come with a metal tamper?
4. Do you know if you will have the bottomless portafilter in stock anytime.
-
Q 1. Do you happen to know how much pressure the spring will make initially and when it finishes? I...... Read more answer nowAsked by on March 23, 2021 3:01 pmAnswered by the admin
1. Do you happen to know how much pressure the spring will make initially and when it finishes? I’m just curious what kind of pressure it can build up, since it’s hard to find any real details.
A. Sorry, we do not have any tool that will ft to test this.
2. For dosing, how much coffee would a double basket for, and what can you reasonably expect as an output.
A. 12-14 grams. Output depends upon how long the lever is held down for.
3. Do all of them now come with a metal tamper?
A. Exports only come with a plastic tamper at this time.
4. Do you know if you will have the bottomless portafilter in stock anytime.
A. Sorry, we do not have an ETA.
Hi, I just picked a Ponte Vecchio Export.
First question is about the pressure stat. Cycles from about 1.5 bar, where it cycles off, then it goes all the way down to 3 psi (sorry to mix bar and psi but you get my point) before turning back on to repeat the cycle. I didn't find the pressure stat in the parts catalogue. Also, is there a group head kit? Or do I have to figure out all the gaskets individually?
-
Q Hi, I just picked a Ponte Vecchio Export. First question is about the pressure stat. Cycles from ...... Read more answer nowAsked by on February 18, 2021 8:14 pmAnswered by the admin
Congratulations. You will need to locate the pressurstat in your machine and search for that code. Depending upon the production, it may be the 1/8 or the 1/4 threading. You will need to inspect prior to purchase.
All gaskets are sold individually.
Hi, Im looking at possibly buying this or the Lusso, where I have pause is i see the portafilter is 45mm, I have looked and I cannot find a tamper of that size on your sight or any other. Any suggestions? What have other consumers who purchase these machines done? Its kinda make or break if I cant find accessories.
-
Q Hi, Im looking at possibly buying this or the Lusso, where I have pause is i see the portafilter ...... Read more answer nowAsked by on January 19, 2021 7:20 pmAnswered by the admin
We opened some of the Lusso & Export models and found a solid tamper in them. Our warehouse will have to open each one to verify.
We also have a bottomless portafilter which will work on either model.
Could you please advise on the lead content of the brass used in this machine? On their website just says “special brass” - what does that mean? Health concern? Thank you.
-
Q Could you please advise on the lead content of the brass used in this machine? On their website j...... Read more answer nowAsked by on November 30, 2020 4:48 pmAnswered by the admin Sorry for the delay, but Ponte Vecchio has not responded to our inquiry. All we can suggest is not using a descaler which can create leaching.
Looking for Part# G8079 for Export machine (group gasket). I see it on the parts diagram but cannot find it as a listed available item.
-
Q Looking for Part# G8079 for Export machine (group gasket). I see it on the parts diagram but cann...... Read more answer nowAsked by on March 3, 2020 2:14 amAnswered by the admin
Sorry, we currently do not have this part in stock. This is a part that usually does not fail. We would need to special order it.
I am looking for the pressure switch for this machine. Did not see it on your website
-
Q I am looking for the pressure switch for this machine. Did not see it on your website answer nowAsked by on November 29, 2019 4:26 pmAnswered by the admin
Depending upon your version, it is usually one of these two Mater pressurstats: 1/8th" thread or 1/4" thread.
It is best to check your machine to confirm it is a Mater pressurestat and its thread size before ordering.
When I fill the boiler (within sight glass limits) put the cap on and turn on the machine, machine leaks steam out of boiler cap so the machine never comes up to pressure. It appears the steam is leaking out of the small hole in the side of the cap, which appears to be there by design as a safety vent feature? Rubber plug is present inside the boiler cap, appears to be in good shape but the rubber seems a bit hard. I have tried hand tightening the cap to the point it is difficult to un-tighten. Steam leak is still present, putting the boiler cap on tighter doesn't appear to change how much steam leaks out. As far as I can tell it's not leaking anywhere else, but that is difficult to confirm with the cap leaking
-
Q When I fill the boiler (within sight glass limits) put the cap on and turn on the machine, machin...... Read more answer nowAsked by on November 25, 2019 10:04 pmAnswered by the admin
You may need a new Ponte Vecchio Export boiler cap with a new gasket. Otherwise, it can be the threading on boiler.
A Turns out it was the threads on the boiler not allowing the cap to seat fully. Cleaned up the threads with a M22x1.5 re-threading die and it's working fine now.
Looking to get pricing and availability of
parts
p4792
c6555 in chrome, red, and white
s9198 in chrome, red, and white
sf9191
-
Q Looking to get pricing and availability of parts p4792 c6555 in chrome, red, and white s919...... Read more answer nowAsked by on May 24, 2019 3:42 pmAnswered by the admin
Please search our web site for part numbers. Availability and pricing will be shown for parts we have. All others are special order and would require prepayment by money order or bank certified check.
4 reviews for DISCONTINUED Ponte Vecchio Export Spring Piston Lever Espresso Machine