DISCONTINUED Mazzer Kony Electronic Stepless Doserless Espresso Coffee Grinder

Request a price match.
This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

.

Mazzer Kony Electronic Stepless Doserless Espresso Coffee Grinder

The Mazzer Kony Electronic is a high end grinder for cafes and restaurants. If you have space in your kitchen, you will never desire another grinder.

Grinding adjustment
  • Stepless – Gives you an “infinite” range of settings which allows you to really fine tune your Kony to your espresso machine. Turn clockwise for a coarser grind and counterclockwise for a finer grind.
  • Setting lock – A set screw that keeps your current setting. Prevents users from accidentally altering it and spending time to find your correct setting again.
Grinding burrs
  • Conical grinding burrs – Very large size at 63 mm. The larger size, the more of a grinding surface, resulting in a faster production.
  • Low rpm – Slower spinning rate at 500 rpm. The lower the speed, the less heat build up, which can affect your coffee grinds. This combined with the large grinding burrs helps keep your production high without sacrificing the quality of your coffee, especially delicate blends.
  • Sweeping fan – Helps push beans down to the burrs for a smooth operation.
Electronic controls
  • Multiple dosing options – Press the dosing button once for a single dose. Press the dosing button quickly twice for a double dose. Hold the dosing button for a manual dose.
  • Time based grinding – You can adjust the the time for each automatic dose up to 99.95 seconds max. You can make very tiny adjustments by 0.05 second increments.
  • Dosing count – This helps keep track of usage. Displays the total count of automatic doses, not manual doses. Single doses will add 1 to the tonal count. Double doses will add 2 to the total count.
Bean hopper
  • Large capacity – Holds approximately 2.5 pounds of roasted coffee beans. Saves time from constantly refilling in a busy environment. Smaller bean hoppers are currently not available.
  • Set screw – Secures the hopper to the Kony. To ensure safety, the grinder will not operate unless the screw is tightened.
  • Fingerguard – Prevents users from “accidentally” putting their fingers in the grinding burrs.
  • Stopper – A door near the bottom of the hopper can be pushed in to close the opening. This allows you to remove the hopper with beans inside so you can easily change the beans. There will be some beans already passed in the burrs which will have to be ground out first before removing the hopper.
Portafilter fork
  • Removable – You can remove the fork if you wish to grind into a container. There are 2 Phillips screws that hold the fork in place.
Grinds catch tray
  • Clean environment – Help keep your counter clean from any accidental spillage from dosing your coffee grinds.
  • Removable – The tray forms to the front feet. You can easily remove if you want to save on width and depth.

For more Mazzer equipment, please visit our Mazzer brands page. If you have any questions, please reference the Q&A tab on each product page.


Brand

Mazzer

Height (inches)

25.5, approximate

Width (inches)

9.5, approximate

Depth (inches)

16.5, approximate

Weight (pounds)

44

Wattage (watts)

350

Voltage (volts)

110 – 120

Burr size (mm), Type

63, conical

Grinding speed (RPM)

500

Hopper capacity (grams)

1300

Country of manufacture

Venice, Italy

Approvals

ETL

Espresso Grinder Warning

  • CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
  • ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.

  1. ETL Certified: Effective July 17, 2007, all of our Mazzer grinders have an ETL certification. ETL certification ensures that a manufacturer is utilizing quality components for product safety, and ongoing inspections and site visits by ETL ensure that manufacturers do not deviate from those standards of product safety. Ultimately, this ensures you that internal components are not changed (usually cost-cutting) without the approval of ETL.

  1. Changing grind settings: As with all coffee grinders, it is very important to only change grind settings when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  2. Finding coffee grinds in a new grinder: We have confirmed that the manufacturer tests EVERY grinder with coffee beans before it leaves their facility, but they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging when you unwrap it.
  3. Static issues: There are static issues with all grinders, even the highest quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, trying using a different blend of beans.
  4. Replacing burrs: NEVER use a flat head screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.
  5. Electrical cord: Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish / slice to damage the cord.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED Mazzer Kony Electronic Stepless Doserless Espresso Coffee Grinder”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

      How much is a replacement hopper
    1. 0 votes
      Q How much is a replacement hopper answer now
      Asked by Ken Steffie on February 5, 2021 8:06 pm
      Answered by the admin

      Please visit our tech support parts section for Mazzer, look for the proper diagram, seek the part number, then search the part number on our web site for availability and pricing. Sorry, we do not list pricing because 5 years from now, the pricing may change.