DISCONTINUED – Mahlkonig EKK43 Commercial Retail Coffee Grinder

Request a price match.

Available in Matte Black or Matte White

Learn more about the other commercial espresso grinders we carry! Additionally, check out the other Mahlkonig coffee grinders we have to offer!

This product has been discontinued at 1st-line. Please visit one of the categories below for more comparable products.

The Mahlkonig EKK43 is Mahlkonig‘s fastest 115-volt retail coffee grinder.

Furthermore, the Mahlkonig EKK43 is for food stores, depots, coffee roasters, and coffee shops to continue the reliable tradition of the manufacturer. In other words, it is exceptionally sturdy with a very high grinding capacity. Additionally, this grinder may be equipped for Turkish-fine mocha. Moreover, its hopper may be locked with a slide plate and bags may easily be clamped into the holder. Primarily, to connect this high-performance grinder, simply plug it into a normal power outlet. Finally, here are some of the revolutionary grinder’s features for consideration.

Mahlkonig EKK43 Features:

  • Stylish, upscale European design fits in most ambiance settings.
  • Color Availability: Matte Black or Matte White.
  • Chill grinding discs.
  • Mill with high grinding performance.
  • Fine use for filter, espresso, or Turkish-fine grinding.
  • Ability to grind materials such as cereals, spices, or poppy seeds.
  • Easy grinding grade adjustment.
  • Hopper magnet / Finger protection.
  • Motor + electrical overload protection.
  • Spout cleaning.
  • 21 various grind settings.

Mahlkonig EKK43 Specifications:

  • Measurements: 30.3″ H x 9.1″ W 23.2″ D (77cm H x 23cm W x 59cm D).
  • Weight: 62 pounds (28 kilograms).
  • Power: 115 Volts, 60 Hertz, 12 amp.
  • Motor: 1.75 hp.
  • Bean Hopper Capacity: 3.3 pounds (1500 grams).
  • Grinder Speed: 3.2-3.9 lbs/min (1450-1760 g/min).
  • Grinding disc diameter: 3.86 inches (98 millimeters).
  • Made in Germany.
  • UL/ETL/CSA Listed.

Would you like to learn more about a higher-end coffee grinder from the same manufacturer? Then take a look at the Mahlkonig DK 15 Industrial Coffee Grinder!

Weight (pounds)

62

Width (inches)

9

Height (inches)

30

Depth (inches)

23

Brand

Mahlkonig

Select Color

Matte Black, Matte White

Hopper Type

Short Hopper, Tall Hopper

Hopper capacity (grams)

1500

Voltage (volts)

110 – 120

Grinding speed (RPM)

1450

Espresso Grinder Warning

  • CLEANING WARNING: We recommend using grinder cleaning agents. We do not recommend any removal of the burrs or burr carrier for cleaning as re-assembly can cause damage.
  • ELECTRICAL WARNING: To avoid electrical damage to this espresso grinder which is not considered a manufacturer's defect, please acquire and install a single-outlet surge suppressor rated at 1080 joules or higher. The lack of the recommended surge suppressor, the espresso grinder can be damaged at the power switch, the capacitor, the motor, or the wiring.

  1. Please note that the manufacturer will produce different colors of this grinder. They do not notify any retailers in advance to which color will be imported. Therefore, the color of the grinder shown is for illustrative purposes, and the grinder ordered and shipped will most likely be different than shown. This applies to all resellers in the USA for this manufacturer.

  1. Changing grind settings: As with all coffee grinders, it is very important to only change grind settings when the unit is powered ‘on’ and the burrs are in motion. If you do not do this, the burrs will ‘gunk’ up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grinder.
  2. Finding coffee grinds in a new grinder: We have confirmed that the manufacturer tests EVERY grinder with coffee beans before it leaves their facility, but they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging when you unwrap it.
  3. Static issues: There are static issues with all grinders, even the highest quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, trying using a different blend of beans.
  4. Replacing burrs: NEVER use a flat head screwdriver and hammer to wedge under the burrs for removal. This could badly damage your grinder.
  5. Electrical cord: Please note that the electrical cord is placed between the packaging (foam or cardboard) and the underside body of the grinder. During shipping, it is normal for a bend or insignificant blemish / slice to damage the cord.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “DISCONTINUED – Mahlkonig EKK43 Commercial Retail Coffee Grinder”

Use one of the allowed file type: jpg,png. The max size allowed is : 3 MB.

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Ask a question

    Please ask follow up questions as a new question. Submitted questions will be first reviewed, answered, and lastly publicized.

    There are no questions yet. Be the first to ask a question about this product.